TI LP8788 PMU supports regulators, battery charger, RTC, ADC, backlight
dri= ver and current sinks.  This patch enables LP8788 backlight module.

(Brightness mode)
The brightness is controlled by PWM input or I2C register.
All modes are supported in the driver.

(Platform data)
Configurable data can be defined in the platform side.
 name                  : backlight driver name. (default: "lcd-backlight")
 initial_brightness    : initial value of backlight brightness
 bl_mode               : brightness control by PWM or lp8788 register
 dim_mode              : dimming mode selection
 full_scale            : full scale current setting
 rise_time             : brightness ramp up step time
 fall_time             : brightness ramp down step time
 pwm_pol               : PWM polarity setting when bl_mode is PWM based
 period_ns             : platform specific PWM period value. unit is nano.

The default values are set in case no platform data is defined.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: "devendra.aaru" <devendra.aaru@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch makes power_on() call optional.  The voltage source can be
provided to some boards using ams369fg06 panel, thus in this case, power
on/off sequence is not necessary.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...

Pull PWM changes from Thierry Reding:
 "A new driver has been added to support the PWM mode of the timer
  counter blocks found on Atmel AT91 SoCs.  The VT8500 driver now
  supports changing the PWM signal polarity and the TI drivers (EHRPWM
  and ECAP) gained suspend and resume functionality.

  User drivers can now query the core for whether access to a PWM device
  will sleep (if the PWM chip is on a slow bus such as I2C or SPI).

  The pwm-backlight driver now handles the backlight BL_CORE_FBBLANK
  state in addition to the FB layer's blanking states.

  To round things off, a few fixes and cleanups are also included"

* tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: twl: Use to_twl() instead of container_of()
  pwm: tegra: assume CONFIG_OF
  pwm_backlight: Validate dft_brightness in main probe function
  pwm: Export pwm_{set,get}_chip_data()
  pwm: Make Kconfig entries more consistent
  pwm: Add can_sleep property to drivers
  pwm: Add pwm_can_sleep() as exported API to users
  pwm-backlight: handle BL_CORE_FBBLANK state
  pwm: pwm-tiecap: Low power sleep support
  pwm: pwm-tiehrpwm: Low power sleep support
  pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver
  pwm: vt8500: Add polarity support
  pwm: vt8500: Register write busy test performed incorrectly
  pwm: atmel: add Timer Counter Block PWM driver

Pull drm merge from Dave Airlie:
 "Highlights:

   - TI LCD controller KMS driver

   - TI OMAP KMS driver merged from staging

   - drop gma500 stub driver

   - the fbcon locking fixes

   - the vgacon dirty like zebra fix.

   - open firmware videomode and hdmi common code helpers

   - major locking rework for kms object handling - pageflip/cursor
     won't block on polling anymore!

   - fbcon helper and prime helper cleanups

   - i915: all over the map, haswell power well enhancements, valleyview
     macro horrors cleaned up, killing lots of legacy GTT code,

   - radeon: CS ioctl unification, deprecated UMS support, gpu reset
     rework, VM fixes

   - nouveau: reworked thermal code, external dp/tmds encoder support
     (anx9805), fences sleep instead of polling,

   - exynos: all over the driver fixes."

Lovely conflict in radeon/evergreen_cs.c between commit de0babd60d8d
("drm/radeon: enforce use of radeon_get_ib_value when reading user cmd")
and the new changes that modified that evergreen_dma_cs_parse()
function.

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (508 commits)
  drm/tilcdc: only build on arm
  drm/i915: Revert hdmi HDP pin checks
  drm/tegra: Add list of framebuffers to debugfs
  drm/tegra: Fix color expansion
  drm/tegra: Split DC_CMD_STATE_CONTROL register write
  drm/tegra: Implement page-flipping support
  drm/tegra: Implement VBLANK support
  drm/tegra: Implement .mode_set_base()
  drm/tegra: Add plane support
  drm/tegra: Remove bogus tegra_framebuffer structure
  drm: Add consistency check for page-flipping
  drm/radeon: Use generic HDMI infoframe helpers
  drm/tegra: Use generic HDMI infoframe helpers
  drm: Add EDID helper documentation
  drm: Add HDMI infoframe helpers
  video: Add generic HDMI infoframe helpers
  drm: Add some missing forward declarations
  drm: Move mode tables to drm_edid.c
  drm: Remove duplicate drm_mode_cea_vic()
  gma500: Fix n, m1 and m2 clock limits for sdvo and lvds
  ...

Pull MFS updates from Samuel Ortiz:
 "This is the MFD pull request for the 3.9 merge window.

  No new drivers this time, but a bunch of fairly big cleanups:

   - Roger Quadros worked on a OMAP USBHS and TLL platform data
     consolidation, OMAP5 support and clock management code cleanup.

   - The first step of a major sync for the ab8500 driver from Lee
     Jones.  In particular, the debugfs and the sysct interfaces got
     extended and improved.

   - Peter Ujfalusi sent a nice patchset for cleaning and fixing the
     twl-core driver, with a much needed module id lookup code
     improvement.

   - The regular wm5102 and arizona cleanups and fixes from Mark Brown.

   - Laxman Dewangan extended the palmas APIs in order to implement the
     palmas GPIO and rt drivers.

   - Laxman also added DT support for the tps65090 driver.

   - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra
     and Darren Hart.

   - Linus Walleij patchset for the ab8500 driver allowed ab8500 and
     ab9540 based devices to switch to the new abx500 pin-ctrl driver.

   - The max8925 now has device tree and irqdomain support thanks to
     Qing Xu.

   - The recently added rtsx driver got a few cleanups and fixes for a
     better card detection code path and now also supports the RTS5227
     chipset, thanks to Wei Wang and Roger Tseng."

* tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits)
  mfd: lpc_ich: Use devres API to allocate private data
  mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH
  mfd: lpc_sch: Accomodate partial population of the MFD devices
  mfd: da9052-i2c: Staticize da9052_i2c_fix()
  mfd: syscon: Fix sparse warning
  mfd: twl-core: Fix kernel panic on boot
  mfd: rtsx: Fix issue that booting OS with SD card inserted
  mfd: ab8500: Fix compile error
  mfd: Add missing GENERIC_HARDIRQS dependecies
  Documentation: Add docs for max8925 dt
  mfd: max8925: Add dts
  mfd: max8925: Support dt for backlight
  mfd: max8925: Fix onkey driver irq base
  mfd: max8925: Fix mfd device register failure
  mfd: max8925: Add irqdomain for dt
  mfd: vexpress: Allow vexpress-sysreg to self-initialise
  mfd: rtsx: Support RTS5227
  mfd: rtsx: Implement driving adjustment to device-dependent callbacks
  mfd: vexpress: Add pseudo-GPIO based LEDs
  mfd: ab8500: Rename ab8500 to abx500 for hwmon driver
  ...

Pull powerpc updates from Benjamin Herrenschmidt:
 "So from the depth of frozen Minnesota, here's the powerpc pull request
  for 3.9.  It has a few interesting highlights, in addition to the
  usual bunch of bug fixes, minor updates, embedded device tree updates
  and new boards:

   - Hand tuned asm implementation of SHA1 (by Paulus & Michael
     Ellerman)

   - Support for Doorbell interrupts on Power8 (kind of fast
     thread-thread IPIs) by Ian Munsie

   - Long overdue cleanup of the way we handle relocation of our open
     firmware trampoline (prom_init.c) on 64-bit by Anton Blanchard

   - Support for saving/restoring & context switching the PPR (Processor
     Priority Register) on server processors that support it.  This
     allows the kernel to preserve thread priorities established by
     userspace.  By Haren Myneni.

   - DAWR (new watchpoint facility) support on Power8 by Michael Neuling

   - Ability to change the DSCR (Data Stream Control Register) which
     controls cache prefetching on a running process via ptrace by
     Alexey Kardashevskiy

   - Support for context switching the TAR register on Power8 (new
     branch target register meant to be used by some new specific
     userspace perf event interrupt facility which is yet to be enabled)
     by Ian Munsie.

   - Improve preservation of the CFAR register (which captures the
     origin of a branch) on various exception conditions by Paulus.

   - Move the Bestcomm DMA driver from arch powerpc to drivers/dma where
     it belongs by Philippe De Muyter

   - Support for Transactional Memory on Power8 by Michael Neuling
     (based on original work by Matt Evans).  For those curious about
     the feature, the patch contains a pretty good description."

(See commit db8ff907027b: "powerpc: Documentation for transactional
memory on powerpc" for the mentioned description added to the file
Documentation/powerpc/transactional_memory.txt)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (140 commits)
  powerpc/kexec: Disable hard IRQ before kexec
  powerpc/85xx: l2sram - Add compatible string for BSC9131 platform
  powerpc/85xx: bsc9131 - Correct typo in SDHC device node
  powerpc/e500/qemu-e500: enable coreint
  powerpc/mpic: allow coreint to be determined by MPIC version
  powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr struct
  powerpc/85xx: Board support for ppa8548
  powerpc/fsl: remove extraneous DIU platform functions
  arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate test
  powerpc: Documentation for transactional memory on powerpc
  powerpc: Add transactional memory to pseries and ppc64 defconfigs
  powerpc: Add config option for transactional memory
  powerpc: Add transactional memory to POWER8 cpu features
  powerpc: Add new transactional memory state to the signal context
  powerpc: Hook in new transactional memory code
  powerpc: Routines for FP/VSX/VMX unavailable during a transaction
  powerpc: Add transactional memory unavaliable execption handler
  powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes
  powerpc: Add FP/VSX and VMX register load functions for transactional memory
  powerpc: Add helper functions for transactional memory context switching
  ...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add generic helpers to pack HDMI infoframes into binary buffers.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Merge misc patches from Andrew Morton:

 - Florian has vanished so I appear to have become fbdev maintainer
   again :(

 - Joel and Mark are distracted to welcome to the new OCFS2 maintainer

 - The backlight queue

 - Small core kernel changes

 - lib/ updates

 - The rtc queue

 - Various random bits

* akpm: (164 commits)
  rtc: rtc-davinci: use devm_*() functions
  rtc: rtc-max8997: use devm_request_threaded_irq()
  rtc: rtc-max8907: use devm_request_threaded_irq()
  rtc: rtc-da9052: use devm_request_threaded_irq()
  rtc: rtc-wm831x: use devm_request_threaded_irq()
  rtc: rtc-tps80031: use devm_request_threaded_irq()
  rtc: rtc-lp8788: use devm_request_threaded_irq()
  rtc: rtc-coh901331: use devm_clk_get()
  rtc: rtc-vt8500: use devm_*() functions
  rtc: rtc-tps6586x: use devm_request_threaded_irq()
  rtc: rtc-imxdi: use devm_clk_get()
  rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug()
  rtc: rtc-pcf8583: use dev_warn() instead of printk()
  rtc: rtc-sun4v: use pr_warn() instead of printk()
  rtc: rtc-vr41xx: use dev_info() instead of printk()
  rtc: rtc-rs5c313: use pr_err() instead of printk()
  rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug()
  rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug()
  rtc: rtc-ds2404: use dev_err() instead of printk()
  rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk()
  ...