linux.git/drivers/video, branch v3.8-rc4 Linux kernel source tree drivers/video/ssd1307fb.c: fix bit order bug in the byte translation function 2013-01-11T22:54:54+00:00 Maxime Ripard maxime.ripard@free-electrons.com 2013-01-11T22:31:43+00:00 552f0cc72aadfc8657876ce310e7a8dc37529536 This was leading to a strange behaviour when using the fbcon driver on top of this one: the letters were in the right order, but each letter had a vertical symmetry. This was because the addressing was right for the byte, but the addressing of each individual bit was inverted. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Brian Lilly <brian@crystalfontz.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Thomas Petazzoni <thomas@free-electrons.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This was leading to a strange behaviour when using the fbcon driver on
top of this one: the letters were in the right order, but each letter
had a vertical symmetry.

This was because the addressing was right for the byte, but the
addressing of each individual bit was inverted.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Brian Lilly <brian@crystalfontz.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Thomas Petazzoni <thomas@free-electrons.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2013-01-09T02:53:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-01-09T02:53:56+00:00 974b33586b4bbbdab33c666417f9ba9ef50b62c3 Pull ARM SoC fixes from Olof Johansson: "People are back from the holiday breaks, and it shows. Here are a bunch of fixes for a number of platforms: - A couple of small fixes for Nomadik - A larger set of changes for kirkwood/mvebu - uart driver selection, dt clocks, gpio-poweroff fixups, a few __init annotation fixes and some error handling improvement in their xor dma driver. - i.MX had a couple of minor fixes (and a critical one for flexcan2 clock setup) - MXS has a small board fix and a framebuffer bugfix - A set of fixes for Samsung Exynos, fixing default bootargs and some Exynos5440 clock issues - A set of OMAP changes including PM fixes and a few sparse warning fixups All in all a bit more positive code delta than we'd ideally want to see here, mostly from the OMAP PM changes, but nothing overly crazy." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers ... 
Pull ARM SoC fixes from Olof Johansson:
 "People are back from the holiday breaks, and it shows.  Here are a
  bunch of fixes for a number of platforms:
   - A couple of small fixes for Nomadik
   - A larger set of changes for kirkwood/mvebu
     - uart driver selection, dt clocks, gpio-poweroff fixups, a few
       __init annotation fixes and some error handling improvement in
       their xor dma driver.
   - i.MX had a couple of minor fixes (and a critical one for flexcan2
     clock setup)
   - MXS has a small board fix and a framebuffer bugfix
   - A set of fixes for Samsung Exynos, fixing default bootargs and some
     Exynos5440 clock issues
   - A set of OMAP changes including PM fixes and a few sparse warning
     fixups

  All in all a bit more positive code delta than we'd ideally want to
  see here, mostly from the OMAP PM changes, but nothing overly crazy."

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
  ARM: clps711x: Fix bad merge of clockevents setup
  ARM: highbank: save and restore L2 cache and GIC on suspend
  ARM: highbank: add a power request clear
  ARM: highbank: fix secondary boot and hotplug
  ARM: highbank: fix typos with hignbank in power request functions
  ARM: dts: fix highbank cpu mpidr values
  ARM: dts: add device_type prop to cpu nodes on Calxeda platforms
  ARM: mx5: Fix MX53 flexcan2 clock
  ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array
  pinctrl: mvebu: make pdma clock on dove mandatory
  ARM: Dove: Add pinctrl clock to DT
  dma: mv_xor: fix error handling for clocks
  dma: mv_xor: fix error handling of mv_xor_channel_add()
  arm: mvebu: Add missing ; for cpu node.
  arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces
  arm: mvebu: Armada XP MV78230 has two cores, not one
  clk: mvebu: Remove inappropriate __init tagging
  ARM: Kirkwood: Use fixed-regulator instead of board gpio call
  ARM: Kirkwood: Fix missing sdio clock
  ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers
  ...
video: mxsfb: fix crash when unblanking the display 2013-01-04T11:52:53+00:00 Lothar Waßmann LW@KARO-electronics.de 2012-11-22T12:49:14+00:00 6c1ecba8d84841277d68140ef485335d5be28485 The VDCTRL4 register does not provide the MXS SET/CLR/TOGGLE feature. The write in mxsfb_disable_controller() sets the data_cnt for the LCD DMA to 0 which obviously means the max. count for the LCD DMA and leads to overwriting arbitrary memory when the display is unblanked. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Juergen Beisert <jbe@pengutronix.de> Tested-by: Lauri Hintsala <lauri.hintsala@bluegiga.net> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 
The VDCTRL4 register does not provide the MXS SET/CLR/TOGGLE feature.
The write in mxsfb_disable_controller() sets the data_cnt for the LCD
DMA to 0 which obviously means the max. count for the LCD DMA and
leads to overwriting arbitrary memory when the display is unblanked.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Juergen Beisert <jbe@pengutronix.de>
Tested-by: Lauri Hintsala <lauri.hintsala@bluegiga.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Drivers: video: remove __dev* attributes. 2013-01-03T23:57:01+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2012-12-21T21:07:39+00:00 48c68c4f1b542444f175a9e136febcecf3e704d8 CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
backlight: locomolcd: fix checkpatch error and warning 2012-12-18T23:02:11+00:00 Jingoo Han jg1.han@samsung.com 2012-12-18T22:21:18+00:00 9f67675a249f6f993edd41bc084827411366a652 This patch fixes the checkpatch error and warning as below: WARNING: space prohibited between function name and open parenthesis '(' ERROR: trailing statements should be on next line Also, long comments are fixed for the preferred style and unnecessary lines are removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This patch fixes the checkpatch error and warning as below:

  WARNING: space prohibited between function name and open parenthesis '('
  ERROR: trailing statements should be on next line

Also, long comments are fixed for the preferred style and unnecessary
lines are removed.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc 2012-12-18T17:58:09+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-12-18T17:58:09+00:00 16e024f30ce96ef5fa651e2914e19d175a924cab Pull powerpc update from Benjamin Herrenschmidt: "The main highlight is probably some base POWER8 support. There's more to come such as transactional memory support but that will wait for the next one. Overall it's pretty quiet, or rather I've been pretty poor at picking things up from patchwork and reviewing them this time around and Kumar no better on the FSL side it seems..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits) powerpc+of: Rename and fix OF reconfig notifier error inject module powerpc: mpc5200: Add a3m071 board support powerpc/512x: don't compile any platform DIU code if the DIU is not enabled powerpc/mpc52xx: use module_platform_driver macro powerpc+of: Export of_reconfig_notifier_[register,unregister] powerpc/dma/raidengine: add raidengine device powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct powerpc/mpc85xx: Change spin table to cached memory powerpc/fsl-pci: Add PCI controller ATMU PM support powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS] powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers powerpc: Disable relocation on exceptions when kexecing powerpc: Enable relocation on during exceptions at boot powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function powerpc: Add wrappers to enable/disable relocation on exceptions powerpc: Add set_mode hcall powerpc: Setup relocation on exceptions for bare metal systems powerpc: Move initial mfspr LPCR out of __init_LPCR powerpc: Add relocation on exception vector handlers ... 
Pull powerpc update from Benjamin Herrenschmidt:
 "The main highlight is probably some base POWER8 support.  There's more
  to come such as transactional memory support but that will wait for
  the next one.

  Overall it's pretty quiet, or rather I've been pretty poor at picking
  things up from patchwork and reviewing them this time around and Kumar
  no better on the FSL side it seems..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits)
  powerpc+of: Rename and fix OF reconfig notifier error inject module
  powerpc: mpc5200: Add a3m071 board support
  powerpc/512x: don't compile any platform DIU code if the DIU is not enabled
  powerpc/mpc52xx: use module_platform_driver macro
  powerpc+of: Export of_reconfig_notifier_[register,unregister]
  powerpc/dma/raidengine: add raidengine device
  powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct
  powerpc/mpc85xx: Change spin table to cached memory
  powerpc/fsl-pci: Add PCI controller ATMU PM support
  powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI
  drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS]
  powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers
  powerpc: Disable relocation on exceptions when kexecing
  powerpc: Enable relocation on during exceptions at boot
  powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function
  powerpc: Add wrappers to enable/disable relocation on exceptions
  powerpc: Add set_mode hcall
  powerpc: Setup relocation on exceptions for bare metal systems
  powerpc: Move initial mfspr LPCR out of __init_LPCR
  powerpc: Add relocation on exception vector handlers
  ...
backlight: corgi_lcd: Use gpio_set_value_cansleep() to avoid WARN_ON 2012-12-18T01:15:17+00:00 Marko Katic dromede@gmail.com 2012-12-18T00:01:14+00:00 1581b088fc91cbb974ad2b98431a8ecabb4852ee Changing backlight intensity on an Akita (Sharp Zaurus C-1000) triggers WARN_ON message: WARNING: at drivers/gpio/gpiolib.c:1672 __gpio_set_value+0x38/0xa4() Modules linked in: Backtrace: corgi_bl_set_intensity+0x0/0x74 corgi_bl_update_status+0x0/0x64 corgi_lcd_probe+0x0/0x258 spi_drv_probe+0x0/0x24 driver_probe_device+0x0/0x208 __driver_attach+0x0/0x94 bus_for_each_dev+0x0/0x90 driver_attach+0x0/0x28 bus_add_driver+0x0/0x22c driver_register+0x0/0x134 spi_register_driver+0x0/0x60 corgi_lcd_driver_init+0x0/0x1c do_one_initcall+0x0/0x174 kernel_init+0x0/0x2a8 Akita machines have backlight controls hooked to a gpio expander chip, max7310 using i2c transfers which can sleep. In this case, pca953x_gpio_set_value() can be called to control gpio, and pca953x_setup_gpio() sets can_sleep flag. Therefore, gpio_set_value_cansleep() should be used in order to avoid WARN_ON on akita machines. Akita is the only exception in this case since other users of corgi_lcd access backlight gpio controls through a different gpio expander which does not set the can_sleep flag. Signed-off-by: Marko Katic <dromede@gmail.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Changing backlight intensity on an Akita (Sharp Zaurus C-1000) triggers
WARN_ON message:

  WARNING: at drivers/gpio/gpiolib.c:1672 __gpio_set_value+0x38/0xa4()
  Modules linked in:
  Backtrace:
    corgi_bl_set_intensity+0x0/0x74
    corgi_bl_update_status+0x0/0x64
    corgi_lcd_probe+0x0/0x258
    spi_drv_probe+0x0/0x24
    driver_probe_device+0x0/0x208
    __driver_attach+0x0/0x94
    bus_for_each_dev+0x0/0x90
    driver_attach+0x0/0x28
    bus_add_driver+0x0/0x22c
    driver_register+0x0/0x134
    spi_register_driver+0x0/0x60
    corgi_lcd_driver_init+0x0/0x1c
    do_one_initcall+0x0/0x174
    kernel_init+0x0/0x2a8

Akita machines have backlight controls hooked to a gpio expander chip,
max7310 using i2c transfers which can sleep.  In this case,
pca953x_gpio_set_value() can be called to control gpio, and
pca953x_setup_gpio() sets can_sleep flag.  Therefore,
gpio_set_value_cansleep() should be used in order to avoid WARN_ON on
akita machines.

Akita is the only exception in this case since other users of corgi_lcd
access backlight gpio controls through a different gpio expander which
does not set the can_sleep flag.

Signed-off-by: Marko Katic <dromede@gmail.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/video/backlight/lms283gf05.c: use GPIOF_INIT flags when using devm_gpio_request_one() 2012-12-18T01:15:17+00:00 Jingoo Han jg1.han@samsung.com 2012-12-18T00:01:12+00:00 1eddd9770f7e809228ae761ecc575f214f571e51 GPIOF_DIR_OUT and GPIOF_DIR_IN are defined as below: GPIOF_DIR_OUT (0 << 0) GPIOF_DIR_IN (1 << 0) So, when !pdata->reset_inverted is 1, the gpio pin can be set as input, instead of output. To prevent this problem, GPIOF_INIT flag should be used when using devm_gpio_request_one(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
GPIOF_DIR_OUT and GPIOF_DIR_IN are defined as below:

   GPIOF_DIR_OUT   (0 << 0)
   GPIOF_DIR_IN    (1 << 0)

So, when !pdata->reset_inverted is 1, the gpio pin can be set as
input, instead of output.

To prevent this problem, GPIOF_INIT flag should be used when using
devm_gpio_request_one().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/video/backlight/lcd.c: return ENXIO when ops functions cannot be called 2012-12-18T01:15:17+00:00 Jingoo Han jg1.han@samsung.com 2012-12-18T00:01:10+00:00 424e06e3da2cbf986d7421f98b90fe5cf4b57be5 Previously, when ops functions cannot be called, lcd_show_contrast() and lcd_store_contrast() returned 0, instead of ENXIO. Thus, in this case, a local variable 'rc' for return value should be initialized as ENXIO, after kstrtoul() is called. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Previously, when ops functions cannot be called, lcd_show_contrast() and
lcd_store_contrast() returned 0, instead of ENXIO.

Thus, in this case, a local variable 'rc' for return value should be
initialized as ENXIO, after kstrtoul() is called.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
backlight: 88pm860x_bl: remove an unnecessary line continuation 2012-12-18T01:15:17+00:00 Jingoo Han jg1.han@samsung.com 2012-12-18T00:01:09+00:00 2fe2380e354d3bb634de673c498a262fb0d632ad Remove an unnecessary line continuation in pm860x_backlight_probe(). Also, a checkpatch warning is fixed as below: WARNING: Avoid unnecessary line continuations [akpm@linux-foundation.org: remove newline] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Remove an unnecessary line continuation in pm860x_backlight_probe().
Also, a checkpatch warning is fixed as below:

  WARNING: Avoid unnecessary line continuations

[akpm@linux-foundation.org: remove newline]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>