linux.git/drivers/video/geode, branch v2.6.23

lxfb: GEODE: Add framebuffer support for the AMD Geode LX

2007-07-31T22:39:37+00:00

Add framebuffer support for the AMD Geode LX graphics engine.

Signed-off-by: Jordan Crouse 
Signed-off-by: Antonino Daplas 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] Recognize video=gx1fb:... option

2007-02-12T17:48:42+00:00

Juergen Beisert reported that the following option doesn't work for him

	video=gx1fb:1024x768-16@60

though sisfb was able to parse similar option correctly.

Signed-off-by: Alexey Dobriyan 
Cc: Jordan Crouse 
Cc: "Antonino A. Daplas" 
Cc: James Simmons 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] gxfb: Turn on the flatpanel power and data

2006-12-08T16:29:08+00:00

For Geode devices without a flatpanel aware BIOS, this enables the flatpanel
power and data.

Signed-off-by: Jordan Crouse 
Cc: "Antonino A. Daplas" 
Acked-by: James Simmons 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] gxfb: Fixup flatpanel detection

2006-12-08T16:29:08+00:00

Use the right MSR and bits to detect if the GX is strapped for TFT or CRT

Signed-off-by: Jordan Crouse 
Cc: "Antonino A. Daplas" 
Acked-by: James Simmons 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] gxfb: Support command line options

2006-12-08T16:29:08+00:00

Add support for command line options for setting the mode and various
settings.

[akpm@osdl.org: cleanups]
Signed-off-by: Jordan Crouse 
Cc: "Antonino A. Daplas" 
Acked-by: James Simmons 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] gxfb: Support flat panel timings

2006-12-08T16:29:08+00:00

Support TFT panels by correctly setting up the flat panel registers

[akpm@osdl.org: cleanups]
Signed-off-by: Jordan Crouse 
Cc: "Antonino A. Daplas" 
Acked-by: James Simmons 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] gxfb: Fixups for the AMD Geode GX framebuffer driver

2006-12-08T16:29:08+00:00

We cannot assume that the BIOS will be correctly setting up the hardware, so
set some bits in various display registers to enable video output.  Allow an
advanced user to specify a frambuffer size, rather then probing the BIOS.  All
of these fixes were prompted by the OLPC effort.

[akpm@osdl.org: cleanups]
Signed-off-by: Jordan Crouse 
Cc: "Antonino A. Daplas" 
Acked-by: James Simmons 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] FB: Get the Geode GX frambuffer size from the BIOS

2006-12-08T16:29:08+00:00

Use the Geode GX BIOS virtual registers to get the actual size of the
framebuffer.

Signed-off-by: Jordan Crouse 
Cc: "Antonino A. Daplas" 
Acked-by: James Simmons 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] Trivial cleanup in the PCI IDs for the CS5535

2006-12-07T16:39:44+00:00

Rename a poorly worded PCI ID for the Geode GX and CS5535 companion chips.
The graphics processor and host bridge actually live in the northbridge on
the integrated processor, not in the companion chip.

Signed-off-by: Jordan Crouse 
Acked-by: Alan Cox 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] vt: Remove VT-specific declarations and definitions from tty.h

2006-07-10T20:24:16+00:00

MAX_NR_CONSOLES, fg_console, want_console and last_console are more of a
function of the VT layer than the TTY one.  Moving these to vt.h and vt_kern.h
allows all of the framebuffer and VT console drivers to remove their
dependency on tty.h.

[akpm@osdl.org: fix alpha build]
Signed-off-by: Jon Smirl 
Signed-off-by: Antonino Daplas 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds