Push the test for info->screen_base from fb_read() and fb_write() into
the implementations of struct fb_ops.{fb_read,fb_write}. In cases where
the driver operates on info->screen_buffer, test this field instead.
While bothi fields, screen_base and screen_buffer, are stored in the
same location, they refer to different address spaces. For correctness,
we want to test each field in exactly the code that uses it.
v2:
* also test screen_base in pvr2fb (Geert)
* also test screen_buffer in ivtvfb, arcfb, broadsheetfb,
hecubafb, metronomefb and ssd1307fb (Geert)
* give a rational for the change (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-18-tzimmermann@suse.de
The file-op entry points fb_read() and fb_write() verify that
info->state has been set to FBINFO_STATE_RUNNING. Remove the same
test from the implementations of struct fb_ops.{fb_read,fb_write}.
v2:
* also remove test from ivtvfb, braodsheetfb, hecubafb and
metronomefb (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-17-tzimmermann@suse.de
Support the kernel's nomodeset parameter for all PCI-based fbdev drivers that use aperture helpers to remove other, hardware-agnostic graphics drivers. The parameter is a simple way of using the firmware-provided scanout buffer if the hardware's native driver is broken. The same effect could be achieved with per-driver options, but the importance of the graphics output for many users makes a single, unified approach worthwhile. With nomodeset specified, the fbdev driver module will not load. This unifies behavior with similar DRM drivers. In DRM helpers, modules first check the nomodeset parameter before registering the PCI driver. As fbdev has no such module helpers, we have to modify each driver individually. The name 'nomodeset' is slightly misleading, but has been chosen for historical reasons. Several drivers implemented it before it became a general option for DRM. So keeping the existing name was preferred over introducing a new one. v2: * print a warning if a driver does not init (Helge) * wrap video_firmware_drivers_only() in helper Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221111133024.9897-3-tzimmermann@suse.de
Remove firmware devices on the PCI bus, by calling aperture_remove_conflicting_pci_devices() in the probe function of each related fbdev driver. iSo far, most of these drivers did not remove conflicting VESA or EFI devices, or outride failed for resource conflicts (i.e., matroxfb.) This must have been broken for quite some time. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220718072322.8927-7-tzimmermann@suse.de
When the sm712fb driver writes three bytes to the framebuffer, the
driver will crash:
BUG: unable to handle page fault for address: ffffc90001ffffff
RIP: 0010:smtcfb_write+0x454/0x5b0
Call Trace:
vfs_write+0x291/0xd60
? do_sys_openat2+0x27d/0x350
? __fget_light+0x54/0x340
ksys_write+0xce/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix it by removing the open-coded endianness fixup-code.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Zheyu Ma reported this crash in the sm712fb driver when reading three bytes from the framebuffer: BUG: unable to handle page fault for address: ffffc90001ffffff RIP: 0010:smtcfb_read+0x230/0x3e0 Call Trace: vfs_read+0x198/0xa00 ? do_sys_openat2+0x27d/0x350 ? __fget_light+0x54/0x340 ksys_read+0xce/0x190 do_syscall_64+0x43/0x90 Fix it by removing the open-coded endianess fixup-code and by moving the pointer post decrement out the fb_readl() function. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Tested-by: Zheyu Ma <zheyuma97@gmail.com> Cc: stable@vger.kernel.org
smtcfb_pci_probe() does not handle ioremap() errors for case 0x720. The patch fixes that exactly like for case 0x710/2. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200713080532.15504-1-novikov@ispras.ru
If smtcfb_pci_probe() does not detect a valid chip it cleans up everything and returns 0. This can result in various bad things later. The patch sets the error code on the corresponding path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200706155328.8396-1-novikov@ispras.ru
the sfb->fb->screen_base is not save the value get by iounmap() when
the chip id is 0x720. so iounmap() for address sfb->fb->screen_base
is not right.
Fixes: 1461d6672864854 ("staging: sm7xxfb: merge sm712fb with fbdev")
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422160719.27763-1-zhengdejin5@gmail.com
Now that the fbops member of struct fb_info is const, we can start making the ops const as well. This does not cover all drivers; some actually modify the fbops struct, for example to adjust for different configurations, and others do more involved things that I'd rather not touch in practically obsolete drivers. Mostly this is the low hanging fruit where we can add "const" and be done with it. v3: - un-constify atyfb, mb862xx, nvidia and uvesabf (0day) v2: - fix typo (Christophe de Dinechin) - use "static const" instead of "const static" in mx3fb.c - also constify smscufx.c Cc: linux-fbdev@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ce67f14435f3af498f2e8bf35ce4be11f7504132.1575390740.git.jani.nikula@intel.com