drm-misc-next for 5.8:

UAPI Changes:

  - drm: error out with EBUSY when device has existing master
  - drm: rework SET_MASTER and DROP_MASTER perm handling

Cross-subsystem Changes:

  - mm: export two symbols from slub/slob
  - fbdev: savage: fix -Wextra build warning
  - video: omap2: Use scnprintf() for avoiding potential buffer overflow

Core Changes:

  - Remove drm_pci.h
  - drm_pci_{alloc/free)() are now legacy
  - Introduce managed DRM resourcesA
  - Allow drivers to subclass struct drm_framebuffer
  - Introduce struct drm_afbc_framebuffer and helpers
  - fbdev: remove return value from generic fbdev setup
  - Introduce simple-encoder helper
  - vram-helpers: set fence on plane
  - dp_mst: ACT timeout improvements
  - dp_mst: Remove drm_dp_mst_has_audio()
  - TTM: ttm_trace_dma_{map/unmap}() cleanups
  - dma-buf: add flag for PCIP2P support
  - EDID: Various improvements
  - Encoder: cleanup semantics of possible_clones and possible_crtcs
  - VBLANK documentation updates
  - Writeback documentation updates

Driver Changes:

  - Convert several drivers to i2c_new_client_device()
  - Drop explicit drm_mode_config_cleanup() calls from drivers
  - Auto-release device structures with drmm_add_final_kfree()
  - Init bfdev console after registering DRM device
  - Make various .debugfs functions return 0 unconditionally; ignore errors
  - video: Use scnprintf() to avoid buffer overflows
  - Convert drivers to simple encoders

  - drm/amdgpu: note that we can handle peer2peer DMA-buf
  - drm/amdgpu: add support for exporting VRAM using DMA-buf v3
  - drm/kirin: Revert change to register connectors
  - drm/lima: Add optional devfreq and cooling device support
  - drm/lima: Various improvements wrt. task handling
  - drm/panel: nt39016: Support multiple modes and 50Hz
  - drm/panel: Support Leadtek LTK050H3146W
  - drm/rockchip: Add support for afbc
  - drm/virtio: Various cleanups
  - drm/hisilicon/hibmc: Enforce 128-byte stride alignment
  - drm/qxl: Fix notify port address of cursor ring buffer
  - drm/sun4i: Improvements to format handling
  - drm/bridge: dw-hdmi: Various improvements

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414090738.GA16827@linux-uq9g

Set logo_shown to FBCON_LOGO_CANSHOW when the vc was deallocated.

syzkaller report: https://lkml.org/lkml/2020/3/27/403
general protection fault, probably for non-canonical address
0xdffffc000000006c: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000360-0x0000000000000367]
RIP: 0010:fbcon_switch+0x28f/0x1740
drivers/video/fbdev/core/fbcon.c:2260

Call Trace:
redraw_screen+0x2a8/0x770 drivers/tty/vt/vt.c:1008
vc_do_resize+0xfe7/0x1360 drivers/tty/vt/vt.c:1295
fbcon_init+0x1221/0x1ab0 drivers/video/fbdev/core/fbcon.c:1219
visual_init+0x305/0x5c0 drivers/tty/vt/vt.c:1062
do_bind_con_driver+0x536/0x890 drivers/tty/vt/vt.c:3542
do_take_over_console+0x453/0x5b0 drivers/tty/vt/vt.c:4122
do_fbcon_takeover+0x10b/0x210 drivers/video/fbdev/core/fbcon.c:588
fbcon_fb_registered+0x26b/0x340 drivers/video/fbdev/core/fbcon.c:3259
do_register_framebuffer drivers/video/fbdev/core/fbmem.c:1664 [inline]
register_framebuffer+0x56e/0x980 drivers/video/fbdev/core/fbmem.c:1832
dlfb_usb_probe.cold+0x1743/0x1ba3 drivers/video/fbdev/udlfb.c:1735
usb_probe_interface+0x310/0x800 drivers/usb/core/driver.c:374

accessing vc_cons[logo_shown].d->vc_top causes the bug.

Reported-by: syzbot+732528bae351682f1f27@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200329085647.25133-1-hqjagain@gmail.com

When 'DEBUG' is not defined, modify the DPRINTK() macro to use the
no_printk() macro instead of using <empty>.
This fixes a build warning when -Wextra is used and provides
printk format checking:

../drivers/video/fbdev/core/fbmon.c:812:47: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../drivers/video/fbdev/core/fbmon.c:842:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
../drivers/video/fbdev/core/fbmon.c:847:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200315041002.24473-2-rdunlap@infradead.org

The objects in $(fb-objs) $(fb-y) $(fb-m) are linked to fb.ko .

This line adds $(fb-y) to fb-objs, so the objects from $(fb-y) are
listed twice as the dependency of the module.

It works because Kbuild trims the duplicated objects from linking,
but there is no good reason to have this line.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106081352.27730-1-masahiroy@kernel.org

Clang warns:

../drivers/video/fbdev/core/fbmem.c:665:3: warning: misleading
indentation; statement is not part of the previous 'else'
[-Wmisleading-indentation]
        if (fb_logo.depth > 4 && depth > 4) {
        ^
../drivers/video/fbdev/core/fbmem.c:661:2: note: previous statement is
here
        else
        ^
../drivers/video/fbdev/core/fbmem.c:1075:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
        return ret;
        ^
../drivers/video/fbdev/core/fbmem.c:1072:2: note: previous statement is
here
        if (!ret)
        ^
2 warnings generated.

This warning occurs because there are spaces before the tabs on these
lines. Normalize the indentation in these functions so that it is
consistent with the Linux kernel coding style and clang no longer warns.

Fixes: 1692b37c99d5 ("fbdev: Fix logo if logo depth is less than framebuffer depth")
Link: https://github.com/ClangBuiltLinux/linux/issues/825
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218030025.10064-1-natechancellor@gmail.com

Clang warns:

../drivers/video/fbdev/core/fbcon.c:915:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
        return err;
        ^
../drivers/video/fbdev/core/fbcon.c:912:2: note: previous statement is
here
        if (!search_fb_in_map(info_idx))
        ^
1 warning generated.

This warning occurs because there is a space before the tab on this
line. This happens on several lines in this function; normalize them
so that the indentation is consistent with the Linux kernel coding
style and clang no longer warns.

This warning was introduced before the beginning of git history so no
fixes tab.

Link: https://github.com/ClangBuiltLinux/linux/issues/824
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218025337.35044-1-natechancellor@gmail.com

The "fix" struct has a 2 byte hole after ->ywrapstep and the
"fix = info->fix;" assignment doesn't necessarily clear it.  It depends
on the compiler.  The solution is just to replace the assignment with an
memcpy().

Fixes: 1f5e31d7e55a ("fbmem: don't call copy_from/to_user() with mutex held")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113100132.ixpaymordi24n3av@kili.mountain

Requested, and we need v5.5-rc1 backported as our current branch is still based on v5.4.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

The variable is only ever used from fbcon.c which is linked into the
same module. Therefore, the export is not needed.

Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827110854.12574-4-peda@axentia.se

Probably most useful if you want no logo at all, or if you only want one
logo regardless of how many CPU cores you have.

Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827110854.12574-3-peda@axentia.se