linux.git/drivers/video/backlight/Makefile, branch v3.14

backlight: lm3630: apply chip revision

2013-11-13T03:09:15+00:00

The LM3630 chip was revised by TI and chip name was also changed to
LM3630A.  And register map, default values and initial sequences are
changed.  The files, lm3630_bl.{c,h} are replaced by lm3630a_bl.{c,h} You
can find more information about LM3630A(datasheet, evm etc) at
http://www.ti.com/product/lm3630a

Signed-off-by: Daniel Jeong 
Signed-off-by: Jingoo Han 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

backlight: Add ROHM BD6107 backlight driver

2013-07-16T04:01:19+00:00

The BD6107 is a multi-purpose 10 channels LED driver for the mobile
market. Only the main channel is supported by this driver.

Signed-off-by: Laurent Pinchart 
Acked-by: Jingoo Han 
Signed-off-by: Simon Horman

backlight: Add Sanyo LV5207LP backlight driver

2013-07-16T04:01:10+00:00

The LV5207LP is a multi-purpose 7 LEDs driver for the mobile market.
Only the main LED is supported by this driver.

Signed-off-by: Laurent Pinchart 
Acked-by: Jingoo Han 
Signed-off-by: Simon Horman

backlight: Add GPIO-based backlight driver

2013-07-16T04:01:05+00:00

The GPIO backlight driver controls the backlight in on/off mode through
a single GPIO.

Signed-off-by: Laurent Pinchart 
Acked-by: Jingoo Han 
Signed-off-by: Simon Horman

video: backlight: add ili922x lcd driver

2013-04-30T01:28:17+00:00

Add LCD driver for Ilitek ILI9221/ILI9222 controller.  The driver uses
SPI interface for controller access and configuration and RGB interface
for graphics data transfer.

Signed-off-by: Stefano Babic 
Signed-off-by: Anatolij Gustschin 
Cc: Richard Purdie 
Cc: Florian Tobias Schandinat 
Cc: Jingoo Han 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

backlight: add new lp8788 backlight driver

2013-02-28T03:10:09+00:00

TI LP8788 PMU supports regulators, battery charger, RTC, ADC, backlight
dri= ver and current sinks.  This patch enables LP8788 backlight module.

(Brightness mode)
The brightness is controlled by PWM input or I2C register.
All modes are supported in the driver.

(Platform data)
Configurable data can be defined in the platform side.
 name                  : backlight driver name. (default: "lcd-backlight")
 initial_brightness    : initial value of backlight brightness
 bl_mode               : brightness control by PWM or lp8788 register
 dim_mode              : dimming mode selection
 full_scale            : full scale current setting
 rise_time             : brightness ramp up step time
 fall_time             : brightness ramp down step time
 pwm_pol               : PWM polarity setting when bl_mode is PWM based
 period_ns             : platform specific PWM period value. unit is nano.

The default values are set in case no platform data is defined.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Milo(Woogyom) Kim 
Cc: Richard Purdie 
Cc: Samuel Ortiz 
Cc: Thierry Reding 
Cc: "devendra.aaru" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

backlight: add an AS3711 PMIC backlight driver

2013-02-22T01:22:25+00:00

This is an initial commit of a backlight driver, using step-up DCDC
power supplies on AS3711 PMIC.  Only one mode has actually been tested,
several further modes have been implemented "dry," but disabled to avoid
accidental hardware damage.  Anyone wishing to use any of those modes
will have to modify the driver.

Tested on sh73a0-based kzm9g board.  Only one mode has been tested and
is enabled.  That mode copies the sample code from the manufacturer.
Deviations from that code proved to be fatal for the hardware...

Signed-off-by: Guennadi Liakhovetski 
Cc: Magnus Damm 
Cc: Richard Purdie 
Acked-by: Jingoo Han 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

drivers/video/backlight/Makefile: cleanup

2013-02-22T01:22:25+00:00

Fix up indenting.  Also alphasort all entries, which reduces patch
collisions.

Cc: Jingoo Han 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

fb: backlight: add the Himax HX-8357B LCD controller

2013-02-22T01:22:24+00:00

Signed-off-by: Maxime Ripard 
Cc: Jingoo Han 
Cc: Shawn Guo 
Cc: Brian Lilly 
Cc: Richard Purdie 
Cc: Florian Tobias Schandinat 
Cc: Grant Likely 
Cc: Rob Herring 
Cc: Joe Perches 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

backlight: add lms501kf03 LCD driver

2013-02-22T01:22:21+00:00

Add the lms501kf03 LCD panel driver.  The lms501kf03 LCD panel (800 x 480)
driver uses 3-wired SPI inteface.

[akpm@linux-foundation.org: remove unused variable `before_power']
[akpm@linux-foundation.org: make lms501kf03_shutdown() static, per Fengguang]
Signed-off-by: Ilho Lee 
Signed-off-by: Jingoo Han 
Cc: "devendra.aaru" 
Cc: Sachin Kamat 
Cc: Wu Fengguang 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds