linux.git/drivers/video/Makefile, branch v2.6.23

remove tx3912fb

2007-07-31T22:39:41+00:00

Remove tx3912fb.  Nino has already removed.  It is no longer needed.

Signed-off-by: Yoichi Yuasa 
Acked-by: Ralf Baechle 
Cc: "Antonino A. Daplas" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Pull video into release branch

2007-07-22T06:28:33+00:00

OMAP: add TI OMAP framebuffer driver

2007-07-17T17:23:13+00:00

- Add Texas Instruments OMAP framebuffer driver.  This driver is being used
  for various OMAP1/2 series based boards and products e.g Nokia N800 Internet
  Tablet, H4, H3, Siemens SX1 etc.

- LCD panel registration and controller code is separated in different file
  and interfaces.

Signed-off-by: Trilok Soni 
Cc: Tony Lindgren 
Cc: "Antonino A. Daplas" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

atmel_lcdfb: AT91/AT32 LCD Controller framebuffer driver

2007-05-11T15:29:37+00:00

Adds a framebuffer driver to ATMEL AT91SAM9x and AT32 aka AVR32 platforms.
Those chips share quite the same IP and this code is suitable for both
architectures.

Signed-off-by: Nicolas Ferre 
Signed-off-by: Antonino Daplas 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ACPI: video: output switch sysfs support

2007-05-10T02:44:38+00:00

Requires CONFIG_VIDEO_OUTPUT_CONTROL and CONFIG_ACPI_VIDEO.

After loading output.ko and video.ko, you would have
/sys/class/video_output and several device acpi_videoNum there.

For example, I got acpi_video0, acpi_video1,acpi_video2,and acpi_video3
under /sys/class/video_output on my T40.
I can query the status of  output device0 by running " cat
/sys/class/video_output/acpi_video0
" The return value is defined in ACPI SPEC B.5.5 _DCS(Return the
Status of Output Device).  Also you can turn off video1 and turn on
video0  by " echo 0 > acpi_video1; echo 0x80000000 > acpi_video0".
Please reference ACPI SPEC  B.5.7 _DSS for the parameter definition.

Please note that it may or may NOT works purely depending on if
your vendor providing correct ACPI video extension support in bios.
the driver output.ko and video.ko just works like a interface to
invoke BIOS.

Signed-off-by: Luming Yu 
Signed-off-by: Len Brown

arkfb: new framebuffer driver for ARK Logic cards

2007-05-09T19:30:57+00:00

This patch adds fbdev driver for graphics cards with ARK Logic 2000PV graphics
chip with ICS 5342 ramdac.

[adaplas@gmail.com: build fixes]
Signed-off-by: Ondrej Zajicek 
Signed-off-by: Antonino Daplas 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

vt8623fb: new framebuffer driver for VIA VT8623

2007-05-09T19:30:57+00:00

This patch adds fbdev driver for graphics core in VIA VT8623

[adaplas@gmail.com: build fixes]
Signed-off-by: Ondrej Zajicek 
Signed-off-by: Antonino Daplas 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

xilinxfb: xilinx framebuffer device driver

2007-05-08T18:15:34+00:00

Add support for the video controller IP block included into Xilinx ML300 and
ML403 reference designs.

Signed-off-by: Andrei Konovalov 
Signed-off-by: Antonino Daplas 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

vmlfb: framebuffer driver for Intel Vermilion Range

2007-05-08T18:15:32+00:00

Add the Intel Vermilion Range framebuffer support.

Signed-off-by: Alan Hourihane 
Signed-off-by: Antonino Daplas 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

fbdev: add fb_read/fb_write functions for framebuffers in system RAM

2007-05-08T18:15:30+00:00

The functions fb_read() and fb_write in fbmem.c assume that the framebuffer
is in IO memory.  However, we have 3 drivers (hecubafb, arcfb, and vfb)
where the framebuffer is allocated from system RAM (via vmalloc). Using
__raw_read/__raw_write (fb_readl/fb_writel) for these drivers is
illegal, especially in other platforms.

Create file read and write methods for these types of drivers.  These are
named fb_sys_read() and fb_sys_write().

Signed-off-by: Antonino Daplas 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds