Without that patch, a user can't select the imxfb driver when the i.MX25
and/or the i.MX27 device tree board are selected and that no boards that
selects IMX_HAVE_PLATFORM_IMX_FB are compiled in.

Cc: Eric Bénard <eric@eukrea.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Denis Carikli <denis@eukrea.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

This adds support for the VGA/LCD core available from OpenCores:
http://opencores.org/project,vga_lcd

The driver have been tested together with both OpenRISC and
ARM (socfpga) processors.

Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

The CLCD driver is used on ARM reference models for ARMv8 so add ARM64
to the list of dependencies. The driver also has no build time dependencies
on ARM (stubs are provided for ARM-specific DMA functions in the code) so
make it available with COMPILE_TEST in order to maximise build coverage.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Pull drm updates from Dave Airlie:
 "This is a combo of -next and some -fixes that came in in the
  intervening time.

  Highlights:

  New drivers:
    ARM Armada driver for Marvell Armada 510 SOCs

  Intel:
    Broadwell initial support under a default off switch,
    Stereo/3D HDMI mode support
    Valleyview improvements
    Displayport improvements
    Haswell fixes
    initial mipi dsi panel support
    CRC support for debugging
    build with CONFIG_FB=n

  Radeon:
    enable DPM on a number of GPUs by default
    secondary GPU powerdown support
    enable HDMI audio by default
    Hawaii support

  Nouveau:
    dynamic pm code infrastructure reworked, does nothing major yet
    GK208 modesetting support
    MSI fixes, on by default again
    PMPEG improvements
    pageflipping fixes

  GMA500:
    minnowboard SDVO support

  VMware:
    misc fixes

  MSM:
    prime, plane and rendernodes support

  Tegra:
    rearchitected to put the drm driver into the drm subsystem.
    HDMI and gr2d support for tegra 114 SoC

  QXL:
    oops fix, and multi-head fixes

  DRM core:
    sysfs lifetime fixes
    client capability ioctl
    further cleanups to device midlayer
    more vblank timestamp fixes"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (789 commits)
  drm/nouveau: do not map evicted vram buffers in nouveau_bo_vma_add
  drm/nvc0-/gr: shift wrapping bug in nvc0_grctx_generate_r406800
  drm/nouveau/pwr: fix missing mutex unlock in a failure path
  drm/nv40/therm: fix slowing down fan when pstate undefined
  drm/nv11-: synchronise flips to vblank, unless async flip requested
  drm/nvc0-: remove nasty fifo swmthd hack for flip completion method
  drm/nv10-: we no longer need to create nvsw object on user channels
  drm/nouveau: always queue flips relative to kernel channel activity
  drm/nouveau: there is no need to reserve/fence the new fb when flipping
  drm/nouveau: when bailing out of a pushbuf ioctl, do not remove previous fence
  drm/nouveau: allow nouveau_fence_ref() to be a noop
  drm/nvc8/mc: msi rearm is via the nvc0 method
  drm/ttm: Fix vma page_prot bit manipulation
  drm/vmwgfx: Fix a couple of compile / sparse warnings and errors
  drm/vmwgfx: Resource evict fixes
  drm/edid: compare actual vrefresh for all modes for quirks
  drm: shmob_drm: Convert to clk_prepare/unprepare
  drm/nouveau: fix 32-bit build
  drm/i915/opregion: fix build error on CONFIG_ACPI=n
  Revert "drm/radeon/audio: don't set speaker allocation on DCE4+"
  ...

In order to make subsystem-wide changes easier, move the Tegra DRM
driver back into the DRM tree.

Signed-off-by: Thierry Reding <treding@nvidia.com>

get display timings from device tree
Use videomode helpers to get display timings and configurations from
device tree

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Pull fbdev changes from Tomi Valkeinen:
 - Improvements to da8xx-fb to make it support v2 of the LCDC IP, used
   eg in BeagleBone
 - Himax HX8369 controller support
 - Various small fixes and cleanups

* tag 'fbdev-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (42 commits)
  video: da8xx-fb: fix the polarities of the hsync/vsync pulse
  video: da8xx-fb: support lcdc v2 timing register expansion
  video: da8xx-fb: fixing timing off by one errors
  video: da8xx-fb fixing incorrect porch mappings
  video: xilinxfb: replace devm_request_and_ioremap by devm_ioremap_resource
  fbmem: move EXPORT_SYMBOL annotation next to symbol declarations
  drivers: video: fbcmap: remove the redundency and incorrect checkings
  video: mxsfb: simplify use of devm_ioremap_resource
  Release efifb's colormap in efifb_destroy()
  at91/avr32/atmel_lcdfb: prepare clk before calling enable
  video: exynos: Ensure definitions match prototypes
  OMAPDSS: fix WARN_ON in 'alpha_blending_enabled' sysfs file
  OMAPDSS: HDMI: Fix possible NULL reference
  video: da8xx-fb: adding am33xx as dependency
  video: da8xx-fb: let compiler decide what to inline
  video: da8xx-fb: make clock naming consistent
  video: da8xx-fb: set upstream clock rate (if reqd)
  video: da8xx-fb: reorganize panel detection
  video: da8xx-fb: ensure non-null cfg in pdata
  video: da8xx-fb: use devres
  ...

Merge da8xx-fb improvements from Darren Etheridge.

Updating Kconfig to allow am33xx to include lcdc fbdev driver
including some extra dependencies needed by device tree mods.

v2: must add FB_MODE_HELPERS as VIDEOMODE_HELPERS alone doesn't
	get the correct functions from fbmon.c built in.

Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

If we create proper platform-devices in x86 boot-code, we can use simplefb
for VBE or EFI framebuffers, too. However, there is normally no OF support
so we introduce a platform_data object so x86 boot-code can pass the
parameters via plain old platform-data.

This also removes the OF dependency as it is not needed. The headers
provide proper dummies for the case OF is disabled.

Furthermore, we move the FORMAT-definitions to the common platform header
so initialization code can use it to transform "struct screen_info" to
the right format-name.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Link: http://lkml.kernel.org/r/1375445127-15480-2-git-send-email-dh.herrmann@gmail.com
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>