linux.git/drivers/vhost/scsi.c, branch v5.9

vhost/scsi: fix up req type endian-ness

2020-07-29T17:24:30+00:00

vhost/scsi doesn't handle type conversion correctly
for request type when using virtio 1.0 and up for BE,
or cross-endian platforms.

Fix it up using vhost_32_to_cpu.

Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin 
Acked-by: Jason Wang 
Reviewed-by: Stefan Hajnoczi

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2020-06-10T20:42:09+00:00

Pull virtio updates from Michael Tsirkin:

 - virtio-mem: paravirtualized memory hotplug

 - support doorbell mapping for vdpa

 - config interrupt support in ifc

 - fixes all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (40 commits)
  vhost/test: fix up after API change
  virtio_mem: convert device block size into 64bit
  virtio-mem: drop unnecessary initialization
  ifcvf: implement config interrupt in IFCVF
  vhost: replace -1 with VHOST_FILE_UNBIND in ioctls
  vhost_vdpa: Support config interrupt in vdpa
  ifcvf: ignore continuous setting same status value
  virtio-mem: Don't rely on implicit compiler padding for requests
  virtio-mem: Try to unplug the complete online memory block first
  virtio-mem: Use -ETXTBSY as error code if the device is busy
  virtio-mem: Unplug subblocks right-to-left
  virtio-mem: Drop manual check for already present memory
  virtio-mem: Add parent resource for all added "System RAM"
  virtio-mem: Better retry handling
  virtio-mem: Offline and remove completely unplugged memory blocks
  mm/memory_hotplug: Introduce offline_and_remove_memory()
  virtio-mem: Allow to offline partially unplugged memory blocks
  mm: Allow to offline unmovable PageOffline() pages via MEM_GOING_OFFLINE
  virtio-mem: Paravirtualized memory hotunplug part 2
  virtio-mem: Paravirtualized memory hotunplug part 1
  ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2020-06-05T22:11:50+00:00

Pull SCSI updates from James Bottomley:
 :This series consists of the usual driver updates (qla2xxx, ufs, zfcp,
  target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host
  of other minor updates.

  There are no major core changes in this series apart from a
  refactoring in scsi_lib.c"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits)
  scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes
  scsi: cxgb3i: Fix some leaks in init_act_open()
  scsi: ibmvscsi: Make some functions static
  scsi: iscsi: Fix deadlock on recovery path during GFP_IO reclaim
  scsi: ufs: Fix WriteBooster flush during runtime suspend
  scsi: ufs: Fix index of attributes query for WriteBooster feature
  scsi: ufs: Allow WriteBooster on UFS 2.2 devices
  scsi: ufs: Remove unnecessary memset for dev_info
  scsi: ufs-qcom: Fix scheduling while atomic issue
  scsi: mpt3sas: Fix reply queue count in non RDPQ mode
  scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event
  scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()
  scsi: vhost: Notify TCM about the maximum sg entries supported per command
  scsi: qla2xxx: Remove return value from qla_nvme_ls()
  scsi: qla2xxx: Remove an unused function
  scsi: iscsi: Register sysfs for iscsi workqueue
  scsi: scsi_debug: Parser tables and code interaction
  scsi: core: Refactor scsi_mq_setup_tags function
  scsi: core: Fix incorrect usage of shost_for_each_device
  scsi: qla2xxx: Fix endianness annotations in source files
  ...

vhost: allow device that does not depend on vhost worker

2020-06-04T19:36:51+00:00

vDPA device currently relays the eventfd via vhost worker. This is
inefficient due the latency of wakeup and scheduling, so this patch
tries to introduce a use_worker attribute for the vhost device. When
use_worker is not set with vhost_dev_init(), vhost won't try to
allocate a worker thread and the vhost_poll will be processed directly
in the wakeup function.

This help for vDPA since it reduces the latency caused by vhost worker.

In my testing, it saves 0.2 ms in pings between VMs on a mutual host.

Signed-off-by: Zhu Lingshan 
Signed-off-by: Jason Wang 
Link: https://lore.kernel.org/r/20200529080303.15449-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin

scsi: vhost: Notify TCM about the maximum sg entries supported per command

2020-05-26T19:52:08+00:00

vhost-scsi pre-allocates the maximum sg entries per command and if a
command requires more than VHOST_SCSI_PREALLOC_SGLS entries, then that
command is failed by it. This patch lets vhost communicate the max sg limit
when it registers vhost_scsi_ops with TCM. With this change, TCM would
report the max sg entries through "Block Limits" VPD page which will be
typically queried by the SCSI initiator during device discovery. By knowing
this limit, the initiator could ensure the maximum transfer length is less
than or equal to what is reported by vhost-scsi.

Link: https://lore.kernel.org/r/1590166317-953-1-git-send-email-sudhakar.panneerselvam@oracle.com
Cc: Michael S. Tsirkin 
Cc: Jason Wang 
Cc: Paolo Bonzini 
Cc: Stefan Hajnoczi 
Reviewed-by: Mike Christie 
Signed-off-by: Sudhakar Panneerselvam 
Signed-off-by: Martin K. Petersen

vhost: Create accessors for virtqueues private_data

2020-04-16T22:31:07+00:00

Signed-off-by: Eugenio Pérez 
Link: https://lore.kernel.org/r/20200331192804.6019-2-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin

vhost: allow per device message handler

2020-04-01T16:06:26+00:00

This patch allow device to register its own message handler during
vhost_dev_init(). vDPA device will use it to implement its own DMA
mapping logic.

Signed-off-by: Jason Wang 
Link: https://lore.kernel.org/r/20200326140125.19794-3-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin

compat_ioctl: move drivers to compat_ptr_ioctl

2019-10-23T15:23:43+00:00

Each of these drivers has a copy of the same trivial helper function to
convert the pointer argument and then call the native ioctl handler.

We now have a generic implementation of that, so use it.

Acked-by: Greg Kroah-Hartman 
Acked-by: Michael S. Tsirkin 
Acked-by: David S. Miller 
Acked-by: Jarkko Sakkinen 
Reviewed-by: Jarkko Sakkinen 
Reviewed-by: Jason Gunthorpe 
Reviewed-by: Jiri Kosina 
Reviewed-by: Stefan Hajnoczi 
Reviewed-by: Cornelia Huck 
Signed-off-by: Arnd Bergmann

vhost: scsi: add weight support

2019-05-27T15:08:23+00:00

This patch will check the weight and exit the loop if we exceeds the
weight. This is useful for preventing scsi kthread from hogging cpu
which is guest triggerable.

This addresses CVE-2019-3900.

Cc: Paolo Bonzini 
Cc: Stefan Hajnoczi 
Fixes: 057cbf49a1f0 ("tcm_vhost: Initial merge for vhost level target fabric driver")
Signed-off-by: Jason Wang 
Reviewed-by: Stefan Hajnoczi 
Signed-off-by: Michael S. Tsirkin 
Reviewed-by: Stefan Hajnoczi

vhost: introduce vhost_exceeds_weight()

2019-05-27T15:08:22+00:00

We used to have vhost_exceeds_weight() for vhost-net to:

- prevent vhost kthread from hogging the cpu
- balance the time spent between TX and RX

This function could be useful for vsock and scsi as well. So move it
to vhost.c. Device must specify a weight which counts the number of
requests, or it can also specific a byte_weight which counts the
number of bytes that has been processed.

Signed-off-by: Jason Wang 
Reviewed-by: Stefan Hajnoczi 
Signed-off-by: Michael S. Tsirkin