linux.git/drivers/usb, branch v6.18-rc2 Linux kernel source tree Merge tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2025-10-04T23:07:08+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-04T23:07:08+00:00 c6006b8ca14dcc604567be99fc4863e6e11ab6e3 Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It was another normal development cycle, with lots of the usual drivers getting updates: - Thunderbolt driver cleanups and additions - dwc3 driver updates - dwc2 driver updates - typec driver updates - xhci driver updates and additions - offload USB engine updates for better power management - unused tracepoint removals - usb gadget fixes and updates as more users start to rely on these drivers instead of the "old" function gadget drivers - new USB device ids - other minor driver USB driver updates - new USB I/O driver framework and driver additions" The last item, the usb i/o driver, has an i2c and gpio driver added through this tree. Those drivers were acked by the respective subsystem maintainers. All of these have been in linux-next for a while" * tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits) usb: vhci-hcd: Prevent suspending virtually attached devices USB: serial: option: add SIMCom 8230C compositions thunderbolt: Fix use-after-free in tb_dp_dprx_work usb: xhci: align PORTSC trace with one-based port numbering usb: xhci: correct indentation for PORTSC tracing function usb: xhci: improve TR Dequeue Pointer mask usb: xhci-pci: add support for hosts with zero USB3 ports usb: xhci: Update a comment about Stop Endpoint retries Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running" usb: gadget: f_rndis: Refactor bind path to use __free() usb: gadget: f_ecm: Refactor bind path to use __free() usb: gadget: f_acm: Refactor bind path to use __free() usb: gadget: f_ncm: Refactor bind path to use __free() usb: gadget: Introduce free_usb_request helper usb: gadget: Store endpoint pointer in usb_request usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv usb: host: xhci-rcar: Move R-Car reg definitions dt-bindings: usb: Document Renesas RZ/G3E USB3HOST usb: gadget: f_fs: Fix epfile null pointer access after ep enable. ... 
Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
  was another normal development cycle, with lots of the usual drivers
  getting updates:

   - Thunderbolt driver cleanups and additions

   - dwc3 driver updates

   - dwc2 driver updates

   - typec driver updates

   - xhci driver updates and additions

   - offload USB engine updates for better power management

   - unused tracepoint removals

   - usb gadget fixes and updates as more users start to rely on these
     drivers instead of the "old" function gadget drivers

   - new USB device ids

   - other minor driver USB driver updates

   - new USB I/O driver framework and driver additions"

  The last item, the usb i/o driver, has an i2c and gpio driver added
  through this tree. Those drivers were acked by the respective
  subsystem maintainers.

  All of these have been in linux-next for a while"

* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
  usb: vhci-hcd: Prevent suspending virtually attached devices
  USB: serial: option: add SIMCom 8230C compositions
  thunderbolt: Fix use-after-free in tb_dp_dprx_work
  usb: xhci: align PORTSC trace with one-based port numbering
  usb: xhci: correct indentation for PORTSC tracing function
  usb: xhci: improve TR Dequeue Pointer mask
  usb: xhci-pci: add support for hosts with zero USB3 ports
  usb: xhci: Update a comment about Stop Endpoint retries
  Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
  usb: gadget: f_rndis: Refactor bind path to use __free()
  usb: gadget: f_ecm: Refactor bind path to use __free()
  usb: gadget: f_acm: Refactor bind path to use __free()
  usb: gadget: f_ncm: Refactor bind path to use __free()
  usb: gadget: Introduce free_usb_request helper
  usb: gadget: Store endpoint pointer in usb_request
  usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
  usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
  usb: host: xhci-rcar: Move R-Car reg definitions
  dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
  usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
  ...
Merge tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media 2025-10-02T20:13:26+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-02T20:13:26+00:00 f79e772258df311c2cb21594ca0996318e720d28 Pull media updates from Mauro Carvalho Chehab: - Added a new V4L2 clock helper - New camera sensor drivers - iris: Enable H.264/H.265 encoder support and fixes in iris driver common code - camss: add support for new SoC flavors - venus: add new SoC support - tc358743: support more infoframe types - Various fixes, driver improvements and cleanups * tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits) media: venus: pm_helpers: add fallback for the opp-table media: qcom: camss: vfe: Fix BPL alignment for QCM2290 media: tuner: xc5000: Fix use-after-free in xc5000_release media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove media: vsp1: Export missing vsp1_isp_free_buffer symbol media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS() media: renesas: ceu: Convert to RUNTIME_PM_OPS() media: renesas: fdp1: Convert to RUNTIME_PM_OPS() media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS() media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS() media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls media: uvcvideo: Shorten the transfer size non compliance message media: uvcvideo: Do not re-reference dev->udev media: uvcvideo: Use intf instead of udev for printks media: uvcvideo: Move video_device under video_queue media: uvcvideo: Drop stream->mutex media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header ... 
Pull media updates from Mauro Carvalho Chehab:

 - Added a new V4L2 clock helper

 - New camera sensor drivers

 - iris: Enable H.264/H.265 encoder support and fixes in iris driver
   common code

 - camss: add support for new SoC flavors

 - venus: add new SoC support

 - tc358743: support more infoframe types

 - Various fixes, driver improvements and cleanups

* tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits)
  media: venus: pm_helpers: add fallback for the opp-table
  media: qcom: camss: vfe: Fix BPL alignment for QCM2290
  media: tuner: xc5000: Fix use-after-free in xc5000_release
  media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
  media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove
  media: vsp1: Export missing vsp1_isp_free_buffer symbol
  media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS()
  media: renesas: ceu: Convert to RUNTIME_PM_OPS()
  media: renesas: fdp1: Convert to RUNTIME_PM_OPS()
  media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
  media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
  media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID
  media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE
  media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls
  media: uvcvideo: Shorten the transfer size non compliance message
  media: uvcvideo: Do not re-reference dev->udev
  media: uvcvideo: Use intf instead of udev for printks
  media: uvcvideo: Move video_device under video_queue
  media: uvcvideo: Drop stream->mutex
  media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header
  ...
Merge tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs 2025-09-29T16:03:07+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-09-29T16:03:07+00:00 b7ce6fa90fd9554482847b19756a06232c1dc78c Pull misc vfs updates from Christian Brauner: "This contains the usual selections of misc updates for this cycle. Features: - Add "initramfs_options" parameter to set initramfs mount options. This allows to add specific mount options to the rootfs to e.g., limit the memory size - Add RWF_NOSIGNAL flag for pwritev2() Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE signal from being raised when writing on disconnected pipes or sockets. The flag is handled directly by the pipe filesystem and converted to the existing MSG_NOSIGNAL flag for sockets - Allow to pass pid namespace as procfs mount option Ever since the introduction of pid namespaces, procfs has had very implicit behaviour surrounding them (the pidns used by a procfs mount is auto-selected based on the mounting process's active pidns, and the pidns itself is basically hidden once the mount has been constructed) This implicit behaviour has historically meant that userspace was required to do some special dances in order to configure the pidns of a procfs mount as desired. Examples include: * In order to bypass the mnt_too_revealing() check, Kubernetes creates a procfs mount from an empty pidns so that user namespaced containers can be nested (without this, the nested containers would fail to mount procfs) But this requires forking off a helper process because you cannot just one-shot this using mount(2) * Container runtimes in general need to fork into a container before configuring its mounts, which can lead to security issues in the case of shared-pidns containers (a privileged process in the pidns can interact with your container runtime process) While SUID_DUMP_DISABLE and user namespaces make this less of an issue, the strict need for this due to a minor uAPI wart is kind of unfortunate Things would be much easier if there was a way for userspace to just specify the pidns they want. So this pull request contains changes to implement a new "pidns" argument which can be set using fsconfig(2): fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd); fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0); or classic mount(2) / mount(8): // mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid"); Cleanups: - Remove the last references to EXPORT_OP_ASYNC_LOCK - Make file_remove_privs_flags() static - Remove redundant __GFP_NOWARN when GFP_NOWAIT is used - Use try_cmpxchg() in start_dir_add() - Use try_cmpxchg() in sb_init_done_wq() - Replace offsetof() with struct_size() in ioctl_file_dedupe_range() - Remove vfs_ioctl() export - Replace rwlock() with spinlock in epoll code as rwlock causes priority inversion on preempt rt kernels - Make ns_entries in fs/proc/namespaces const - Use a switch() statement() in init_special_inode() just like we do in may_open() - Use struct_size() in dir_add() in the initramfs code - Use str_plural() in rd_load_image() - Replace strcpy() with strscpy() in find_link() - Rename generic_delete_inode() to inode_just_drop() and generic_drop_inode() to inode_generic_drop() - Remove unused arguments from fcntl_{g,s}et_rw_hint() Fixes: - Document @name parameter for name_contains_dotdot() helper - Fix spelling mistake - Always return zero from replace_fd() instead of the file descriptor number - Limit the size for copy_file_range() in compat mode to prevent a signed overflow - Fix debugfs mount options not being applied - Verify the inode mode when loading it from disk in minixfs - Verify the inode mode when loading it from disk in cramfs - Don't trigger automounts with RESOLVE_NO_XDEV If openat2() was called with RESOLVE_NO_XDEV it didn't traverse through automounts, but could still trigger them - Add FL_RECLAIM flag to show_fl_flags() macro so it appears in tracepoints - Fix unused variable warning in rd_load_image() on s390 - Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD - Use ns_capable_noaudit() when determining net sysctl permissions - Don't call path_put() under namespace semaphore in listmount() and statmount()" * tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits) fcntl: trim arguments listmount: don't call path_put() under namespace semaphore statmount: don't call path_put() under namespace semaphore pid: use ns_capable_noaudit() when determining net sysctl permissions fs: rename generic_delete_inode() and generic_drop_inode() init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD initramfs: Replace strcpy() with strscpy() in find_link() initrd: Use str_plural() in rd_load_image() initramfs: Use struct_size() helper to improve dir_add() initrd: Fix unused variable warning in rd_load_image() on s390 fs: use the switch statement in init_special_inode() fs/proc/namespaces: make ns_entries const filelock: add FL_RECLAIM to show_fl_flags() macro eventpoll: Replace rwlock with spinlock selftests/proc: add tests for new pidns APIs procfs: add "pidns" mount option pidns: move is-ancestor logic to helper openat2: don't trigger automounts with RESOLVE_NO_XDEV namei: move cross-device check to __traverse_mounts namei: remove LOOKUP_NO_XDEV check from handle_mounts ... 
Pull misc vfs updates from Christian Brauner:
 "This contains the usual selections of misc updates for this cycle.

  Features:

   - Add "initramfs_options" parameter to set initramfs mount options.
     This allows to add specific mount options to the rootfs to e.g.,
     limit the memory size

   - Add RWF_NOSIGNAL flag for pwritev2()

     Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE
     signal from being raised when writing on disconnected pipes or
     sockets. The flag is handled directly by the pipe filesystem and
     converted to the existing MSG_NOSIGNAL flag for sockets

   - Allow to pass pid namespace as procfs mount option

     Ever since the introduction of pid namespaces, procfs has had very
     implicit behaviour surrounding them (the pidns used by a procfs
     mount is auto-selected based on the mounting process's active
     pidns, and the pidns itself is basically hidden once the mount has
     been constructed)

     This implicit behaviour has historically meant that userspace was
     required to do some special dances in order to configure the pidns
     of a procfs mount as desired. Examples include:

     * In order to bypass the mnt_too_revealing() check, Kubernetes
       creates a procfs mount from an empty pidns so that user
       namespaced containers can be nested (without this, the nested
       containers would fail to mount procfs)

       But this requires forking off a helper process because you cannot
       just one-shot this using mount(2)

     * Container runtimes in general need to fork into a container
       before configuring its mounts, which can lead to security issues
       in the case of shared-pidns containers (a privileged process in
       the pidns can interact with your container runtime process)

       While SUID_DUMP_DISABLE and user namespaces make this less of an
       issue, the strict need for this due to a minor uAPI wart is kind
       of unfortunate

       Things would be much easier if there was a way for userspace to
       just specify the pidns they want. So this pull request contains
       changes to implement a new "pidns" argument which can be set
       using fsconfig(2):

           fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd);
           fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0);

       or classic mount(2) / mount(8):

           // mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc
           mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid");

  Cleanups:

   - Remove the last references to EXPORT_OP_ASYNC_LOCK

   - Make file_remove_privs_flags() static

   - Remove redundant __GFP_NOWARN when GFP_NOWAIT is used

   - Use try_cmpxchg() in start_dir_add()

   - Use try_cmpxchg() in sb_init_done_wq()

   - Replace offsetof() with struct_size() in ioctl_file_dedupe_range()

   - Remove vfs_ioctl() export

   - Replace rwlock() with spinlock in epoll code as rwlock causes
     priority inversion on preempt rt kernels

   - Make ns_entries in fs/proc/namespaces const

   - Use a switch() statement() in init_special_inode() just like we do
     in may_open()

   - Use struct_size() in dir_add() in the initramfs code

   - Use str_plural() in rd_load_image()

   - Replace strcpy() with strscpy() in find_link()

   - Rename generic_delete_inode() to inode_just_drop() and
     generic_drop_inode() to inode_generic_drop()

   - Remove unused arguments from fcntl_{g,s}et_rw_hint()

  Fixes:

   - Document @name parameter for name_contains_dotdot() helper

   - Fix spelling mistake

   - Always return zero from replace_fd() instead of the file descriptor
     number

   - Limit the size for copy_file_range() in compat mode to prevent a
     signed overflow

   - Fix debugfs mount options not being applied

   - Verify the inode mode when loading it from disk in minixfs

   - Verify the inode mode when loading it from disk in cramfs

   - Don't trigger automounts with RESOLVE_NO_XDEV

     If openat2() was called with RESOLVE_NO_XDEV it didn't traverse
     through automounts, but could still trigger them

   - Add FL_RECLAIM flag to show_fl_flags() macro so it appears in
     tracepoints

   - Fix unused variable warning in rd_load_image() on s390

   - Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD

   - Use ns_capable_noaudit() when determining net sysctl permissions

   - Don't call path_put() under namespace semaphore in listmount() and
     statmount()"

* tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
  fcntl: trim arguments
  listmount: don't call path_put() under namespace semaphore
  statmount: don't call path_put() under namespace semaphore
  pid: use ns_capable_noaudit() when determining net sysctl permissions
  fs: rename generic_delete_inode() and generic_drop_inode()
  init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD
  initramfs: Replace strcpy() with strscpy() in find_link()
  initrd: Use str_plural() in rd_load_image()
  initramfs: Use struct_size() helper to improve dir_add()
  initrd: Fix unused variable warning in rd_load_image() on s390
  fs: use the switch statement in init_special_inode()
  fs/proc/namespaces: make ns_entries const
  filelock: add FL_RECLAIM to show_fl_flags() macro
  eventpoll: Replace rwlock with spinlock
  selftests/proc: add tests for new pidns APIs
  procfs: add "pidns" mount option
  pidns: move is-ancestor logic to helper
  openat2: don't trigger automounts with RESOLVE_NO_XDEV
  namei: move cross-device check to __traverse_mounts
  namei: remove LOOKUP_NO_XDEV check from handle_mounts
  ...
usb: vhci-hcd: Prevent suspending virtually attached devices 2025-09-25T16:52:32+00:00 Cristian Ciocaltea cristian.ciocaltea@collabora.com 2025-09-02T12:15:46+00:00 e40b984b6c4ce3f80814f39f86f87b2a48f2e662 The VHCI platform driver aims to forbid entering system suspend when at least one of the virtual USB ports are bound to an active USB/IP connection. However, in some cases, the detection logic doesn't work reliably, i.e. when all devices attached to the virtual root hub have been already suspended, leading to a broken suspend state, with unrecoverable resume. Ensure the virtually attached devices do not enter suspend by setting the syscore PM flag. Note this is currently limited to the client side only, since the server side doesn't implement system suspend prevention. Fixes: 04679b3489e0 ("Staging: USB/IP: add client driver") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20250902-vhci-hcd-suspend-fix-v3-1-864e4e833559@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The VHCI platform driver aims to forbid entering system suspend when at
least one of the virtual USB ports are bound to an active USB/IP
connection.

However, in some cases, the detection logic doesn't work reliably, i.e.
when all devices attached to the virtual root hub have been already
suspended, leading to a broken suspend state, with unrecoverable resume.

Ensure the virtually attached devices do not enter suspend by setting
the syscore PM flag.  Note this is currently limited to the client side
only, since the server side doesn't implement system suspend prevention.

Fixes: 04679b3489e0 ("Staging: USB/IP: add client driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250902-vhci-hcd-suspend-fix-v3-1-864e4e833559@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'usb-serial-6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next 2025-09-25T16:38:53+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2025-09-25T16:38:53+00:00 264a58e60c5c93b358818f523eb4911190c8b8d7 Johan writes: USB serial updates for 6.18-rc1 Here are the USB serial updates for 6.18-rc1 consisting of some new modem device ids and a trivial cleanup. Everything has been in linux-next with no reported issues. * tag 'usb-serial-6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add SIMCom 8230C compositions USB: serial: oti6858: remove extranenous ; after comment 
Johan writes:

USB serial updates for 6.18-rc1

Here are the USB serial updates for 6.18-rc1 consisting of some new
modem device ids and a trivial cleanup.

Everything has been in linux-next with no reported issues.

* tag 'usb-serial-6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add SIMCom 8230C compositions
  USB: serial: oti6858: remove extranenous ; after comment
USB: serial: option: add SIMCom 8230C compositions 2025-09-24T07:30:06+00:00 Xiaowei Li xiaowei.li@simcom.com 2025-09-24T03:16:50+00:00 0e0ba0ecec3d6e819e0c2348331ff99afe2eb5d5 Add support for SIMCom 8230C which is based on Qualcomm SDX35 chip. USB Device Listings: 0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet (QMI mode) + adb T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9071 Rev= 5.15 S: Manufacturer=SIMCOM S: Product=SDXBAAGHA-IDP _SN:D744C4C5 S: SerialNumber=0123456789ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x9078: tty (DM) + tty (NMEA) + tty (AT) + ECM + adb T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9078 Rev= 5.15 S: Manufacturer=SIMCOM S: Product=SDXBAAGHA-IDP _SN:D744C4C5 S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x907b: RNDIS + tty (DM) + tty (NMEA) + tty (AT) + adb T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=907b Rev= 5.15 S: Manufacturer=SIMCOM S: Product=SDXBAAGHA-IDP _SN:D744C4C5 S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=ef(misc ) Sub=04 Prot=01 I:* If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Xiaowei Li <xiaowei.li@simcom.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 
Add support for SIMCom 8230C which is based on Qualcomm SDX35 chip.

USB Device Listings:

0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet (QMI mode) + adb
T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 10 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=9071 Rev= 5.15
S:  Manufacturer=SIMCOM
S:  Product=SDXBAAGHA-IDP _SN:D744C4C5
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=86(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x9078: tty (DM) + tty (NMEA) + tty (AT) + ECM + adb
T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  9 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=9078 Rev= 5.15
S:  Manufacturer=SIMCOM
S:  Product=SDXBAAGHA-IDP _SN:D744C4C5
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x907b: RNDIS + tty (DM) + tty (NMEA) + tty (AT) + adb
T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=907b Rev= 5.15
S:  Manufacturer=SIMCOM
S:  Product=SDXBAAGHA-IDP _SN:D744C4C5
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=ef(misc ) Sub=04 Prot=01
I:* If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Xiaowei Li <xiaowei.li@simcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
usb: xhci: align PORTSC trace with one-based port numbering 2025-09-18T07:53:11+00:00 Niklas Neronin niklas.neronin@linux.intel.com 2025-09-17T21:07:25+00:00 a4e143636d5def935dd461539b67b61287a8dfef In the xHCI driver, port numbers are typically described using a one-based index. However, tracing currently uses a zero-based index. To ensure consistency between tracing and dynamic debugging, update the trace port number to use a one-based index. Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250917210726.97100-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
In the xHCI driver, port numbers are typically described using a one-based
index. However, tracing currently uses a zero-based index. To ensure
consistency between tracing and dynamic debugging, update the trace port
number to use a one-based index.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci: correct indentation for PORTSC tracing function 2025-09-18T07:53:11+00:00 Niklas Neronin niklas.neronin@linux.intel.com 2025-09-17T21:07:24+00:00 e16fdeaa96846aefd05760ca45be32da8c1dfc83 Correct the indentation in USB Port Register Set (PORTSC) tracing. Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250917210726.97100-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Correct the indentation in USB Port Register Set (PORTSC) tracing.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci: improve TR Dequeue Pointer mask 2025-09-18T07:53:11+00:00 Niklas Neronin niklas.neronin@linux.intel.com 2025-09-17T21:07:23+00:00 931e468764b22a587febf562e57249e95e84350d Address the naming and usage of the TR Dequeue Pointer mask in the xhci driver. The Endpoint Context Field at offset 0x08 is defined as follows: Bit 0 Dequeue Cycle State (DCS) Bits 3:1 RsvdZ (Reserved and Zero) Bits 63:4 TR Dequeue Pointer When extracting the TR Dequeue Pointer for an Endpoint without Streams, in xhci_handle_cmd_set_deq(), the inverted Dequeue Cycle State mask (~EP_CTX_CYCLE_MASK) is used, inadvertently including the Reserved bits. Although bits 3:1 are typically zero, using the incorrect mask could cause issues. The existing mask, named "SCTX_DEQ_MASK," is misleading because "SCTX" implies exclusivity to Stream Contexts, whereas the TR Dequeue Pointer is applicable to both Stream and non-Stream Contexts. Rename the mask to "TR_DEQ_PTR_MASK", utilize GENMASK_ULL() macro and use the mask when handling the TR Dequeue Pointer field. Function xhci_get_hw_deq() returns the Endpoint Context Field 0x08, either directly from the Endpoint context or a Stream. Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250917210726.97100-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Address the naming and usage of the TR Dequeue Pointer mask in the xhci
driver. The Endpoint Context Field at offset 0x08 is defined as follows:
 Bit 0		Dequeue Cycle State (DCS)
 Bits 3:1	RsvdZ (Reserved and Zero)
 Bits 63:4	TR Dequeue Pointer

When extracting the TR Dequeue Pointer for an Endpoint without Streams,
in xhci_handle_cmd_set_deq(), the inverted Dequeue Cycle State mask
(~EP_CTX_CYCLE_MASK) is used, inadvertently including the Reserved bits.
Although bits 3:1 are typically zero, using the incorrect mask could cause
issues.

The existing mask, named "SCTX_DEQ_MASK," is misleading because "SCTX"
implies exclusivity to Stream Contexts, whereas the TR Dequeue Pointer is
applicable to both Stream and non-Stream Contexts.

Rename the mask to "TR_DEQ_PTR_MASK", utilize GENMASK_ULL() macro and use
the mask when handling the TR Dequeue Pointer field.

Function xhci_get_hw_deq() returns the Endpoint Context Field 0x08, either
directly from the Endpoint context or a Stream.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci-pci: add support for hosts with zero USB3 ports 2025-09-18T07:53:11+00:00 Niklas Neronin niklas.neronin@linux.intel.com 2025-09-17T21:07:22+00:00 719de070f764e079cdcb4ddeeb5b19b3ddddf9c1 Add xhci support for PCI hosts that have zero USB3 ports. Avoid creating a shared Host Controller Driver (HCD) when there is only one root hub. Additionally, all references to 'xhci->shared_hcd' are now checked before use. Only xhci-pci.c requires modification to accommodate this change, as the xhci core already supports configurations with zero USB3 ports. This capability was introduced when xHCI Platform and MediaTek added support for zero USB3 ports. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220181 Tested-by: Nick Nielsen <nick.kainielsen@free.fr> Tested-by: grm1 <grm1@mailbox.org> Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250917210726.97100-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add xhci support for PCI hosts that have zero USB3 ports.
Avoid creating a shared Host Controller Driver (HCD) when there is only
one root hub. Additionally, all references to 'xhci->shared_hcd' are now
checked before use.

Only xhci-pci.c requires modification to accommodate this change, as the
xhci core already supports configurations with zero USB3 ports. This
capability was introduced when xHCI Platform and MediaTek added support
for zero USB3 ports.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220181
Tested-by: Nick Nielsen <nick.kainielsen@free.fr>
Tested-by: grm1 <grm1@mailbox.org>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>