Move this API to the canonical timer_*() namespace.

[ tglx: Redone against pre rc1 ]

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
  Included in here are the following:

   - USB offload support for audio devices.

     I think this takes the record for the most number of patch series
     (30+) over the longest period of time (2+ years) to get merged
     properly.

     Many props go to Wesley Cheng for seeing this effort through, they
     took a major out-of-tree hacked-up-monstrosity that was created by
     multiple vendors for their specific devices, got it all merged into
     a semi-coherent set of changes, and got all of the different major
     subsystems to agree on how this should be implemented both with
     changes to their code as well as userspace apis, AND wrangled the
     hardware companies into agreeing to go forward with this, despite
     making them all redo work they had already done in their private
     device trees.

     This feature offers major power savings on embedded devices where a
     USB audio stream can continue to flow while the rest of the system
     is sleeping, something that devices running on battery power really
     care about. There are still some more small tweaks left to be done
     here, and those patches are still out for review and arguing among
     the different hardware companies, but this is a major step forward
     and a great example of how to do upstream development well.

   - small number of thunderbolt fixes and updates, things seem to be
     slowing down here (famous last words...)

   - xhci refactors and reworking to try to handle some rough corner
     cases in some hardware implementations where things don't always
     work properly

   - typec driver updates

   - USB3 power management reworking and updates

   - Removal of some old and orphaned UDC gadget drivers that had not
     been used in a very long time, dropping over 11 thousand lines from
     the tree, always a nice thing, making up for the 12k lines added
     for the USB offload feature.

   - lots of little updates and fixes in different drivers

  All of these have been in linux-next for over 2 weeks, the USB offload
  logic has been in there for 8 weeks now, with no reported issues"

* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
  ALSA: usb-audio: qcom: fix USB_XHCI dependency
  ASoC: qdsp6: fix compile-testing without CONFIG_OF
  usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
  usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
  USB: typec: fix const issue in typec_match()
  USB: gadget: udc: fix const issue in gadget_match_driver()
  USB: gadget: fix up const issue with struct usb_function_instance
  USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
  USB: serial: bus: fix const issue in usb_serial_device_match()
  usb: usbtmc: Fix timeout value in get_stb
  usb: usbtmc: Fix read_stb function and get_stb ioctl
  ALSA: qc_audio_offload: try to reduce address space confusion
  ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
  ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
  ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
  usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
  dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
  usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
  usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
  usb: gadget: epautoconf: Use USB API functions rather than constants
  ...

Pull LED updates from Lee Jones:
 "LED Triggers:
   - Allow writing "default" to the sysfs 'trigger' attribute to set an
     LED to its default trigger
   - If the default trigger is "none", writing "default" will remove the
     current trigger
   - Updated sysfs ABI documentation for the new "default" trigger
     functionality

  LED KUnit Testing:
   - Provide a skeleton KUnit test suite for the LEDs framework
   - Expand the LED class device registration KUnit test to cover more
     scenarios, including 'brightness_get' behavior
   - Add KUnit tests for the LED lookup and get API ('led_add_lookup',
     'devm_led_get')

  LED Flash Class:
   - Add support for setting flash/strobe duration through a new
     'duration_set' op and 'led_set_flash_duration()' function, aligning
     with 'V4L2_CID_FLASH_DURATION'

  Texas Instruments TPS6131x:
   - Add a new driver for the TPS61310/TPS61311 flash LED controllers
   - The driver supports the device's three constant-current sinks for
     flash and torch modes

  LED Core:
   - Prevent potential 'snprintf()' truncations in LED names by checking
     for buffer overflows

  ChromeOS EC LEDs:
   - Avoid a -Wflex-array-member-not-at-end GCC warning by replacing an
     on-stack flexible structure definition with a utility function call

  Multicolor LEDs:
   - Fix issue where setting multi_intensity while software blinking is
     active could stop blinking

  PCA955x LEDs:
   - Avoid potential buffer overflow when creating default labels by
     changing a field's type to 'u8' and updating format specifiers

  PCA995x LEDs:
   - Fix a typo (stray space) in an 'of_device_id' entry in the
     'pca995x_of_match' table

  Kconfig:
   - Prevent LED drivers from being enabled by default when
     'COMPILE_TEST' is set

  Device Property API:
   - Split 'device_get_child_node_count()' into a new helper
     'fwnode_get_child_node_count()' that doesn't require a device
     struct, making the API more symmetrical

  Driver Modernization (using 'fwnode_get_child_node_count()'):
   - Update 'leds-pwm-multicolor', 'leds-ncp5623' and 'leds-ncp5623' to
     use the new 'fwnode_get_child_node_count()' helper, removing their
     custom implementation
   - As above in the USB Type-C TCPM driver

  Driver Modernization (using new GPIO setter callbacks):
   - Convert 'leds-lgm-sso' to use new GPIO line value setter callbacks
     which return an integer for error handling
   - Convert 'leds-pca955x', 'leds-pca9532' and 'leds-tca6507' to use
     new GPIO setter callbacks

  Documentation:
   - Remove the '.rst' extension for 'leds-st1202' in the documentation
     index for consistency

  LP8860 LEDs:
   - Use 'regmap_multi_reg_write()' for EEPROM writes instead of manual
     looping
   - Use scoped mutex guards and 'devm_mutex_init()' to simplify
     function exits and ensure automatic cleanup
   - Remove default register definitions that are unused when regmap
     caching is not active
   - Use 'devm_regulator_get_enable_optional()' to handle the optional
     regulator, simplifying enabling and removing manual disabling
   - Refactor 'lp8860_unlock_eeprom()' to only perform the unlock
     operation, removing the lock part and an unnecessary parameter
   - Use a 'devm' action to disable the enable-GPIO, simplifying cleanup
     and error paths, and remove the now-empty '.remove()' function

  Turris Omnia LEDs:
   - Drop unnecessary commas in terminator entries of 'struct attribute'
     and 'struct of_device_id' arrays

  MT6370 RGB LEDs:
   - Use the 'LINEAR_RANGE()' for defining 'struct linear_range' entries
     to improve robustness

  Texas Instruments TPS6131x:
   - Add new devicetree bindings for the TI TPS61310/TPS61311 flash LED
     driver"

* tag 'leds-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (31 commits)
  leds: tps6131x: Add support for Texas Instruments TPS6131X flash LED driver
  dt-bindings: leds: Add Texas Instruments TPS6131x flash LED driver
  leds: flash: Add support for flash/strobe duration
  leds: rgb: leds-mt6370-rgb: Improve definition of some struct linear_range
  leds: led-test: Provide tests for the lookup and get infrastructure
  leds: led-test: Fill out the registration test to cover more test cases
  leds: led-test: Remove standard error checking after KUNIT_ASSERT_*()
  leds: pca995x: Fix typo in pca995x_of_match's of_device_id entry
  leds: Provide skeleton KUnit testing for the LEDs framework
  leds: tca6507: Use new GPIO line value setter callbacks
  leds: pca9532: Use new GPIO line value setter callbacks
  leds: pca955x: Use new GPIO line value setter callbacks
  leds: lgm-sso: Use new GPIO line value setter callbacks
  leds: Do not enable by default during compile testing
  leds: turris-omnia: Drop commas in the terminator entries
  leds: lp8860: Disable GPIO with devm action
  leds: lp8860: Only unlock in lp8860_unlock_eeprom()
  leds: lp8860: Enable regulator using enable_optional helper
  leds: lp8860: Remove default regs when not caching
  leds: lp8860: Use new mutex guards to cleanup function exits
  ...

Pull HID updates from Jiri Kosina:

 - support for Apple Magic Mouse 2 USB-C (Aditya Garg)

 - power management improvement for multitouch devices (Werner Sembach)

 - fix for ACPI initialization in intel-thc driver (Wentao Guan)

 - adaptation of HID drivers to use new gpio_chip's line setter
   callbacks (Bartosz Golaszewski)

 - fix potential OOB in usbhid_parse() (Terry Junge)

 - make it possible to set hid_mouse_ignore_list dynamically (the same
   way we handle other quirks) (Aditya Garg)

 - other small assorted fixes and device ID additions

* tag 'hid-for-linus-2025060301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: multitouch: Disable touchpad on firmware level while not in use
  HID: core: Add functions for HID drivers to react on first open and last close call
  HID: HID_APPLETB_BL should depend on X86
  HID: HID_APPLETB_KBD should depend on X86
  HID: appletb-kbd: Use secs_to_jiffies() instead of msecs_to_jiffies()
  HID: intel-thc-hid: intel-thc: make read-only arrays static const
  HID: magicmouse: Apple Magic Mouse 2 USB-C support
  HID: mcp2221: use new line value setter callbacks
  HID: mcp2200: use new line value setter callbacks
  HID: cp2112: use new line value setter callbacks
  HID: cp2112: use lock guards
  HID: cp2112: hold the lock for the entire direction_output() call
  HID: cp2112: destroy mutex on driver detach
  HID: intel-thc-hid: intel-quicki2c: pass correct arguments to acpi_evaluate_object
  HID: corsair-void: Use to_delayed_work()
  HID: hid-logitech: use sysfs_emit_at() instead of scnprintf()
  HID: quirks: Add HID_QUIRK_IGNORE_MOUSE quirk
  HID: usbhid: Eliminate recurrent out-of-bounds bug in usbhid_parse()
  HID: Kysona: Add periodic online check

Pull power management updates from Rafael Wysocki:
 "Once again, the changes are dominated by cpufreq updates, but this
  time the majority of them are cpufreq core changes, mostly related to
  the introduction of policy locking guards and __free() usage, and
  fixes related to boost handling.

  Still, there is also a significant update of the intel_pstate driver
  making it register an energy model when running on a hybrid platform
  which is used for enabling energy-aware scheduling (EAS) if the driver
  operates in the passive mode (and schedutil is used as the cpufreq
  governor for all CPUs which is the passive mode default).

  There are some amd-pstate driver updates too, for a good measure,
  including the "Requested CPU Min frequency" BIOS option support and
  new online/offline callbacks.

  In the cpuidle space, the most significant change is the addition of a
  C1 demotion on/off sysfs knob to intel_idle which should help some
  users to configure their systems more precisely. There is also the
  conversion of the PSCI cpuidle driver to a faux device one and there
  are two small updates of cpuidle governors.

  Device power management is also modified quite a bit, especially the
  handling of devices with asynchronous suspend and resume enabled
  during system transitions. They are now going to be handled more
  asynchronously during suspend transitions and somewhat less
  aggressively during resume transitions.

  Apart from the above, the operating performance points (OPP) library
  is now going to use mutex locking guards and scope-based cleanup
  helpers and there is the usual bunch of assorted fixes and code
  cleanups.

  Specifics:

   - Fix potential division-by-zero error in em_compute_costs() (Yaxiong
     Tian)

   - Fix typos in energy model documentation and example driver code
     (Moon Hee Lee, Atul Kumar Pant)

   - Rearrange the energy model management code and add a new function
     for adjusting a CPU energy model after adjusting the capacity of
     the given CPU to it (Rafael Wysocki)

   - Refactor cpufreq_online(), add and use cpufreq policy locking
     guards, use __free() in policy reference counting, and clean up
     core cpufreq code on top of that (Rafael Wysocki)

   - Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
     Kumar)

   - Fix des_perf clamping with max_perf in amd_pstate_update()
     (Dhananjay Ugwekar)

   - Add offline, online and suspend callbacks to the amd-pstate driver,
     rename and use the existing amd_pstate_epp callbacks in it
     (Dhananjay Ugwekar)

   - Add support for the "Requested CPU Min frequency" BIOS option to
     the amd-pstate driver (Dhananjay Ugwekar)

   - Reset amd-pstate driver mode after running selftests (Swapnil
     Sapkal)

   - Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
     Chancellor)

   - Add helper for governor checks to the schedutil cpufreq governor
     and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki)

   - Populate the cpu_capacity sysfs entries from the intel_pstate
     driver after registering asym capacity support (Ricardo Neri)

   - Add support for enabling Energy-aware scheduling (EAS) to the
     intel_pstate driver when operating in the passive mode on a hybrid
     platform (Rafael Wysocki)

   - Drop redundant cpus_read_lock() from store_local_boost() in the
     cpufreq core (Seyediman Seyedarab)

   - Replace sscanf() with kstrtouint() in the cpufreq code and use a
     symbol instead of a raw number in it (Bowen Yu)

   - Add support for autonomous CPU performance state selection to the
     CPPC cpufreq driver (Lifeng Zheng)

   - OPP: Add dev_pm_opp_set_level() (Praveen Talari)

   - Introduce scope-based cleanup headers and mutex locking guards in
     OPP core (Viresh Kumar)

   - Switch OPP to use kmemdup_array() (Zhang Enpei)

   - Optimize bucket assignment when next_timer_ns equals KTIME_MAX in
     the menu cpuidle governor (Zhongqiu Han)

   - Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla)

   - Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
     Bityutskiy)

   - Fix typos in two comments in the teo cpuidle governor (Atul Kumar
     Pant)

   - Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
     Kalla)

   - Move debug runtime PM attributes to runtime_attrs[] (Rafael
     Wysocki)

   - Add new devm_ functions for enabling runtime PM and runtime PM
     reference counting (Bence Csókás)

   - Remove size arguments from strscpy() calls in the hibernation core
     code (Thorsten Blum)

   - Adjust the handling of devices with asynchronous suspend enabled
     during system suspend and resume to start resuming them immediately
     after resuming their parents and to start suspending such a device
     immediately after suspending its first child (Rafael Wysocki)

   - Adjust messages printed during tasks freezing to avoid using
     pr_cont() (Andrew Sayers, Paul Menzel)

   - Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
     Zhang)

   - Add missing wakeup source attribute relax_count to sysfs and remove
     the space character at the end ofi the string produced by
     pm_show_wakelocks() (Zijun Hu)

   - Add configurable pm_test delay for hibernation (Zihuan Zhang)

   - Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
     cypd4226 device on Tegra boards from suspending prematurely (Jon
     Hunter)

   - Unbreak printing PM debug messages during hibernation and clean up
     some related code (Rafael Wysocki)

   - Add a systemd service to run cpupower and change cpupower binding's
     Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)"

* tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
  cpufreq: CPPC: Add support for autonomous selection
  cpufreq: Update sscanf() to kstrtouint()
  cpufreq: Replace magic number
  OPP: switch to use kmemdup_array()
  PM: freezer: Rewrite restarting tasks log to remove stray *done.*
  PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
  cpufreq: drop redundant cpus_read_lock() from store_local_boost()
  cpupower: do not install files to /etc/default/
  cpupower: do not call systemctl at install time
  cpupower: do not write DESTDIR to cpupower.service
  PM: sleep: Introduce pm_sleep_transition_in_progress()
  cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
  cpufreq: intel_pstate: Document hybrid processor support
  cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
  cpufreq: intel_pstate: EAS support for hybrid platforms
  PM: EM: Introduce em_adjust_cpu_capacity()
  PM: EM: Move CPU capacity check to em_adjust_new_capacity()
  PM: EM: Documentation: Fix typos in example driver code
  cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
  PM: sleep: Introduce pm_suspend_in_progress()
  ...

Pull timer cleanups from Thomas Gleixner:
 "Another set of timer API cleanups:

    - Convert init_timer*(), try_to_del_timer_sync() and
      destroy_timer_on_stack() over to the canonical timer_*()
      namespace convention.

  There is another large conversion pending, which has not been included
  because it would have caused a gazillion of merge conflicts in next.
  The conversion scripts will be run towards the end of the merge window
  and a pull request sent once all conflict dependencies have been
  merged"

* tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack()
  treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try()
  timers: Rename init_timers() as timers_init()
  timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA
  timers: Rename __init_timer_on_stack() as __timer_init_on_stack()
  timers: Rename __init_timer() as __timer_init()
  timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack()
  timers: Rename init_timer_key() as timer_init_key()

Merge updates related to system sleep handling and runtime PM for 6.16-rc1:

 - Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
   Kalla).

 - Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki).

 - Add new devm_ functions for enabling runtime PM and runtime PM
   reference counting (Bence Csókás).

 - Remove size arguments from strscpy() calls in the hibernation core
   code (Thorsten Blum).

 - Adjust the handling of devices with asynchronous suspend enabled
   during system suspend and resume to start resuming them immediately
   after resuming their parents and to start suspending such a device
   immediately after suspending its first child (Rafael Wysocki).

 - Adjust messages printed during tasks freezing to avoid using
   pr_cont() (Andrew Sayers, Paul Menzel).

 - Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
   Zhang).

 - Add missing wakeup source attribute relax_count to sysfs and
   remove the space character at the end ofi the string produced by
   pm_show_wakelocks() (Zijun Hu).

 - Add configurable pm_test delay for hibernation (Zihuan Zhang).

 - Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
   cypd4226 device on Tegra boards from suspending prematurely (Jon
   Hunter).

 - Unbreak printing PM debug messages during hibernation and clean up
   some related code (Rafael Wysocki).

* pm-runtime:
  PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
  PM: sysfs: Move debug runtime PM attributes to runtime_attrs[]
  PM: runtime: Add new devm functions

* pm-sleep:
  PM: freezer: Rewrite restarting tasks log to remove stray *done.*
  PM: sleep: Introduce pm_sleep_transition_in_progress()
  PM: sleep: Introduce pm_suspend_in_progress()
  PM: sleep: Print PM debug messages during hibernation
  ucsi_ccg: Disable async suspend in ucsi_ccg_probe()
  PM: hibernate: add configurable delay for pm_test
  PM: wakeup: Delete space in the end of string shown by pm_show_wakelocks()
  PM: wakeup: Add missing wakeup source attribute relax_count
  PM: sleep: Remove unnecessary !!
  PM: sleep: Use two lines for "Restarting..." / "done" messages
  PM: sleep: Make suspend of devices more asynchronous
  PM: sleep: Suspend async parents after suspending children
  PM: sleep: Resume children after resuming the parent
  PM: hibernate: Remove size arguments when calling strscpy()

Pull block updates from Jens Axboe:

 - ublk updates:
      - Add support for updating the size of a ublk instance
      - Zero-copy improvements
      - Auto-registering of buffers for zero-copy
      - Series simplifying and improving GET_DATA and request lookup
      - Series adding quiesce support
      - Lots of selftests additions
      - Various cleanups

 - NVMe updates via Christoph:
      - add per-node DMA pools and use them for PRP/SGL allocations
        (Caleb Sander Mateos, Keith Busch)
      - nvme-fcloop refcounting fixes (Daniel Wagner)
      - support delayed removal of the multipath node and optionally
        support the multipath node for private namespaces (Nilay Shroff)
      - support shared CQs in the PCI endpoint target code (Wilfred
        Mallawa)
      - support admin-queue only authentication (Hannes Reinecke)
      - use the crc32c library instead of the crypto API (Eric Biggers)
      - misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes
        Reinecke, Leon Romanovsky, Gustavo A. R. Silva)

 - MD updates via Yu:
      - Fix that normal IO can be starved by sync IO, found by mkfs on
        newly created large raid5, with some clean up patches for bdev
        inflight counters

 - Clean up brd, getting rid of atomic kmaps and bvec poking

 - Add loop driver specifically for zoned IO testing

 - Eliminate blk-rq-qos calls with a static key, if not enabled

 - Improve hctx locking for when a plug has IO for multiple queues
   pending

 - Remove block layer bouncing support, which in turn means we can
   remove the per-node bounce stat as well

 - Improve blk-throttle support

 - Improve delay support for blk-throttle

 - Improve brd discard support

 - Unify IO scheduler switching. This should also fix a bunch of lockdep
   warnings we've been seeing, after enabling lockdep support for queue
   freezing/unfreezeing

 - Add support for block write streams via FDP (flexible data placement)
   on NVMe

 - Add a bunch of block helpers, facilitating the removal of a bunch of
   duplicated boilerplate code

 - Remove obsolete BLK_MQ pci and virtio Kconfig options

 - Add atomic/untorn write support to blktrace

 - Various little cleanups and fixes

* tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits)
  selftests: ublk: add test for UBLK_F_QUIESCE
  ublk: add feature UBLK_F_QUIESCE
  selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE
  traceevent/block: Add REQ_ATOMIC flag to block trace events
  ublk: run auto buf unregisgering in same io_ring_ctx with registering
  io_uring: add helper io_uring_cmd_ctx_handle()
  ublk: remove io argument from ublk_auto_buf_reg_fallback()
  ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch()
  selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK
  selftests: ublk: support UBLK_F_AUTO_BUF_REG
  ublk: support UBLK_AUTO_BUF_REG_FALLBACK
  ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG
  ublk: prepare for supporting to register request buffer automatically
  ublk: convert to refcount_t
  selftests: ublk: make IO & device removal test more stressful
  nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
  nvme: introduce multipath_always_on module param
  nvme-multipath: introduce delayed removal of the multipath head node
  nvme-pci: derive and better document max segments limits
  nvme-pci: use struct_size for allocation struct nvme_dev
  ...

When the USB5744 option is disabled, the onboard_usb driver warns about
unused functions:

drivers/usb/misc/onboard_usb_dev.c:358:12: error: 'onboard_dev_5744_i2c_write_byte' defined but not used [-Werror=unused-function]
  358 | static int onboard_dev_5744_i2c_write_byte(struct i2c_client *client, u16 addr, u8 data)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/misc/onboard_usb_dev.c:313:12: error: 'onboard_dev_5744_i2c_read_byte' defined but not used [-Werror=unused-function]
  313 | static int onboard_dev_5744_i2c_read_byte(struct i2c_client *client, u16 addr, u8 *data)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Extend the #ifdef block a little further to cover all of these functions.
Ideally we'd use use if(IS_ENABLED()) instead, but that doesn't currently
work because the i2c_transfer() and i2c_smbus_write_word_data() function
declarations are hidden  when CONFIG_I2C is disabled.

Fixes: 1143d41922c0 ("usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250523120947.2170302-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

"VOLAGE" should become "VOLTAGE"

Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Reviewed-by: Brigham Campbell <me@brighamcampbell.com>
Link: https://lore.kernel.org/r/20250521214851.386796-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>