Pull xen updates from Juergen Gross:

 - A bunch of minor cleanups

 - A fix for kexec in Xen dom0 when executed on a high cpu number

 - A fix for resuming after suspend of a Xen guest with assigned PCI
   devices

 - A fix for a crash due to not disabled preemption when resuming as Xen
   dom0

* tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: fix is_xen_pmu()
  xen: don't hang when resuming PCI device
  arch:x86:xen: Remove unnecessary assignment in xen_apic_read()
  xen/grant-table: remove readonly parameter from functions
  xen/grant-table: remove gnttab_*transfer*() functions
  drivers/xen: use helper macro __ATTR_RW
  x86/xen: Fix kerneldoc warning
  xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32
  xen: use time_is_before_eq_jiffies() instead of open coding it

Pull tty/serial driver updates from Greg KH:
 "Here are the big set of tty and serial driver changes for 5.18-rc1.

  Nothing major, some more good cleanups from Jiri and 2 new serial
  drivers. Highlights include:

   - termbits cleanups

   - export symbol cleanups and other core cleanups from Jiri Slaby

   - new sunplus and mvebu uart drivers (amazing that people are still
     creating new uarts...)

   - samsung serial driver cleanups

   - ldisc 29 is now "reserved" for experimental/development line
     disciplines

   - lots of other tiny fixes and cleanups to serial drivers and
     bindings

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits)
  vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE
  serial: 8250: fix XOFF/XON sending when DMA is used
  tty: serial: samsung: Add ARTPEC-8 support
  dt-bindings: serial: samsung: Add ARTPEC-8 UART
  serial: sc16is7xx: Clear RS485 bits in the shutdown
  tty: serial: samsung: simplify getting OF match data
  tty: serial: samsung: constify variables and pointers
  tty: serial: samsung: constify s3c24xx_serial_drv_data members
  tty: serial: samsung: constify UART name
  tty: serial: samsung: constify s3c24xx_serial_drv_data
  tty: serial: samsung: reduce number of casts
  tty: serial: samsung: embed s3c2410_uartcfg in parent structure
  tty: serial: samsung: embed s3c24xx_uart_info in parent structure
  serial: 8250_tegra: mark acpi_device_id as unused with !ACPI
  tty: serial: bcm63xx: use more precise Kconfig symbol
  serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS
  tty: serial: jsm: fix two assignments in if conditions
  tty: serial: jsm: remove redundant assignments to variable linestatus
  serial: 8250_mtk: make two read-only arrays static const
  serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
  ...

Pull char/misc and other driver updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  updates for 5.18-rc1.

  Included in here are merges from driver subsystems which contain:

   - iio driver updates and new drivers

   - fsi driver updates

   - fpga driver updates

   - habanalabs driver updates and support for new hardware

   - soundwire driver updates and new drivers

   - phy driver updates and new drivers

   - coresight driver updates

   - icc driver updates

  Individual changes include:

   - mei driver updates

   - interconnect driver updates

   - new PECI driver subsystem added

   - vmci driver updates

   - lots of tiny misc/char driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
  firmware: google: Properly state IOMEM dependency
  kgdbts: fix return value of __setup handler
  firmware: sysfb: fix platform-device leak in error path
  firmware: stratix10-svc: add missing callback parameter on RSU
  arm64: dts: qcom: add non-secure domain property to fastrpc nodes
  misc: fastrpc: Add dma handle implementation
  misc: fastrpc: Add fdlist implementation
  misc: fastrpc: Add helper function to get list and page
  misc: fastrpc: Add support to secure memory map
  dt-bindings: misc: add fastrpc domain vmid property
  misc: fastrpc: check before loading process to the DSP
  misc: fastrpc: add secure domain support
  dt-bindings: misc: add property to support non-secure DSP
  misc: fastrpc: Add support to get DSP capabilities
  misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
  misc: fastrpc: separate fastrpc device from channel context
  dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
  dt-bindings: nvmem: make "reg" property optional
  nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
  nvmem: dt-bindings: Fix the error of dt-bindings check
  ...

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 5.18-rc1.

  Nothing major in here, just lots of little improvements and cleanups
  and new device support. Highlights are:

   - list iterator fixups for when we walk past the end of the list (a
     common problem that was cut/pasted in almost all USB gadget
     drivers)

   - xen USB driver "hardening" for malicious hosts

   - xhci driver updates and fixes for more hardware types

   - xhci debug cable fixes to make it actually work again

   - usb gadget audio driver improvements

   - usb gadget storage fixes to work with OS-X

   - lots of other small usb gadget fixes and updates

   - USB DWC3 driver improvements for more hardware types

   - Lots of other small USB driver improvements

   - DTS updates for some USB platforms

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
  usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue()
  dt-bindings: usb: mtk-xhci: add compatible for mt8186
  usb: dwc3: Issue core soft reset before enabling run/stop
  usb: gadget: Makefile: remove ccflags-y
  USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
  usb: gadget: eliminate anonymous module_init & module_exit
  usb: usbip: eliminate anonymous module_init & module_exit
  xen/usb: harden xen_hcd against malicious backends
  usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue
  usb: dwc3: gadget: move cmd_endtransfer to extra function
  usb: dwc3: gadget: ep_queue simplify isoc start condition
  xen/usb: don't use arbitrary_virt_to_machine()
  usb: isp1760: remove redundant max_packet() macro
  usb: oxu210hp-hcd: remove redundant call to max_packet() macro
  usb: common: usb-conn-gpio: Make VBUS supply completely optional
  USB: storage: ums-realtek: fix error code in rts51x_read_mem()
  usb: early: xhci-dbc: Fix xdbc number parsing
  usb: early: xhci-dbc: Remove duplicate keep parsing
  x86/tsc: Be consistent about use_tsc_delay()
  usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body
  ...

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (qla2xxx, pm8001,
  libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
  and bug fixes.

  The high blast radius core update is the removal of write same, which
  affects block and several non-SCSI devices. The other big change,
  which is more local, is the removal of the SCSI pointer"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
  scsi: scsi_ioctl: Drop needless assignment in sg_io()
  scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
  scsi: lpfc: Copyright updates for 14.2.0.0 patches
  scsi: lpfc: Update lpfc version to 14.2.0.0
  scsi: lpfc: SLI path split: Refactor BSG paths
  scsi: lpfc: SLI path split: Refactor Abort paths
  scsi: lpfc: SLI path split: Refactor SCSI paths
  scsi: lpfc: SLI path split: Refactor CT paths
  scsi: lpfc: SLI path split: Refactor misc ELS paths
  scsi: lpfc: SLI path split: Refactor VMID paths
  scsi: lpfc: SLI path split: Refactor FDISC paths
  scsi: lpfc: SLI path split: Refactor LS_RJT paths
  scsi: lpfc: SLI path split: Refactor LS_ACC paths
  scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
  scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
  scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
  scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
  scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
  scsi: lpfc: SLI path split: Refactor lpfc_iocbq
  scsi: lpfc: Use kcalloc()
  ...

Pull media updates from Mauro Carvalho Chehab:

 - a major reorg at platform Kconfig/Makefile files, organizing them per
   vendor. The other media Kconfig/Makefile files also sorted

 - New sensor drivers: hi847, isl7998x, ov08d10

 - New Amphion vpu decoder stateful driver

 - New Atmel microchip csi2dc driver

 - tegra-vde driver promoted from staging

 - atomisp: some fixes for it to work on BYT

 - imx7-mipi-csis driver promoted from staging and renamed

 - camss driver got initial support for VFE hardware version Titan 480

 - mtk-vcodec has gained support for MT8192

 - lots of driver changes, fixes and improvements

* tag 'media/v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (417 commits)
  media: nxp: Restrict VIDEO_IMX_MIPI_CSIS to ARCH_MXC or COMPILE_TEST
  media: amphion: cleanup media device if register it fail
  media: amphion: fix some issues to improve robust
  media: amphion: fix some error related with undefined reference to __divdi3
  media: amphion: fix an issue that using pm_runtime_get_sync incorrectly
  media: vidtv: use vfree() for memory allocated with vzalloc()
  media: m5mols/m5mols.h: document new reset field
  media: pixfmt-yuv-planar.rst: fix PIX_FMT labels
  media: platform: Remove unnecessary print function dev_err()
  media: amphion: Add missing of_node_put() in vpu_core_parse_dt()
  media: mtk-vcodec: Add missing of_node_put() in mtk_vdec_hw_prob_done()
  media: platform: amphion: Fix build error without MAILBOX
  media: spi: Kconfig: Place SPI drivers on a single menu
  media: i2c: Kconfig: move camera drivers to the top
  media: atomisp: fix bad usage at error handling logic
  media: platform: rename mediatek/mtk-jpeg/ to mediatek/jpeg/
  media: media/*/Kconfig: sort entries
  media: Kconfig: cleanup VIDEO_DEV dependencies
  media: platform/*/Kconfig: make manufacturer menus more uniform
  media: platform: Create vendor/{Makefile,Kconfig} files
  ...

Pull folio updates from Matthew Wilcox:

 - Rewrite how munlock works to massively reduce the contention on
   i_mmap_rwsem (Hugh Dickins):

     https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/

 - Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
   Hellwig):

     https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/

 - Convert GUP to use folios and make pincount available for order-1
   pages. (Matthew Wilcox)

 - Convert a few more truncation functions to use folios (Matthew
   Wilcox)

 - Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
   Wilcox)

 - Convert rmap_walk to use folios (Matthew Wilcox)

 - Convert most of shrink_page_list() to use a folio (Matthew Wilcox)

 - Add support for creating large folios in readahead (Matthew Wilcox)

* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
  mm/damon: minor cleanup for damon_pa_young
  selftests/vm/transhuge-stress: Support file-backed PMD folios
  mm/filemap: Support VM_HUGEPAGE for file mappings
  mm/readahead: Switch to page_cache_ra_order
  mm/readahead: Align file mappings for non-DAX
  mm/readahead: Add large folio readahead
  mm: Support arbitrary THP sizes
  mm: Make large folios depend on THP
  mm: Fix READ_ONLY_THP warning
  mm/filemap: Allow large folios to be added to the page cache
  mm: Turn can_split_huge_page() into can_split_folio()
  mm/vmscan: Convert pageout() to take a folio
  mm/vmscan: Turn page_check_references() into folio_check_references()
  mm/vmscan: Account large folios correctly
  mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
  mm/vmscan: Free non-shmem folios without splitting them
  mm/rmap: Constify the rmap_walk_control argument
  mm/rmap: Convert rmap_walk() to take a folio
  mm: Turn page_anon_vma() into folio_anon_vma()
  mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
  ...

Pull spi updates from Mark Brown:
 "The overwhelming bulk of this pull request is a change from Uwe
  Kleine-König which changes the return type of the remove() function to
  void as part of some wider work he's doing to do this for all bus
  types, causing updates to most SPI device drivers. The branch with
  that on has been cross merged with a couple of other trees which added
  new SPI drivers this cycle, I'm not expecting any build issues
  resulting from the change.

  Otherwise it's been a relatively quiet release with some new device
  support, a few minor features and the welcome completion of the
  conversion of the subsystem to use GPIO descriptors rather than
  numbers:

   - Change return type of remove() to void.

   - Completion of the conversion of SPI controller drivers to use GPIO
     descriptors rather than numbers.

   - Quite a few DT schema conversions.

   - Support for multiple SPI devices on a bus in ACPI systems.

   - Big overhaul of the PXA2xx SPI driver.

   - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
     MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
     Sunplus SP7021"

[ And this is obviously where that spi change that snuck into the
  regulator tree _should_ have been :^]

* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
  spi: fsi: Implement a timeout for polling status
  spi: Fix erroneous sgs value with min_t()
  spi: tegra20: Use of_device_get_match_data()
  spi: mediatek: add ipm design support for MT7986
  spi: Add compatible for MT7986
  spi: sun4i: fix typos in comments
  spi: mediatek: support tick_delay without enhance_timing
  spi: Update clock-names property for arm pl022
  spi: rockchip-sfc: fix platform_get_irq.cocci warning
  spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
  spi: dt-bindings: samsung: Add fsd spi compatible
  spi: topcliff-pch: Prevent usage of potentially stale DMA device
  spi: tegra210-quad: combined sequence mode
  spi: tegra210-quad: add acpi support
  spi: npcm-fiu: Fix typo ("npxm")
  spi: Fix Tegra QSPI example
  spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
  spi: cadence: fix platform_get_irq.cocci warning
  spi: Update NXP Flexspi maintainer details
  dt-bindings: mfd: maxim,max77802: Convert to dtschema
  ...

Pull power management updates from Rafael Wysocki:
 "These are mostly fixes and cleanups all over the code and a new piece
  of documentation for Intel uncore frequency scaling.

  Functionality-wise, the intel_idle driver will support Sapphire Rapids
  Xeons natively now (with some extra facilities for controlling
  C-states more precisely on those systems), virtual guests will take
  the ACPI S4 hardware signature into account by default, the
  intel_pstate driver will take the defualt EPP value from the firmware,
  cpupower utility will support the AMD P-state driver added in the
  previous cycle, and there is a new tracer utility for that driver.

  Specifics:

   - Allow device_pm_check_callbacks() to be called from interrupt
     context without issues (Dmitry Baryshkov).

   - Modify devm_pm_runtime_enable() to automatically handle
     pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
     Anderson).

   - Make the schedutil cpufreq governor use to_gov_attr_set() instead
     of open coding it (Kevin Hao).

   - Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
     cpufreq longhaul driver (Rafael Wysocki).

   - Unify show() and store() naming in cpufreq and make it use
     __ATTR_XX (Lianjie Zhang).

   - Make the intel_pstate driver use the EPP value set by the firmware
     by default (Srinivas Pandruvada).

   - Re-order the init checks in the powernow-k8 cpufreq driver (Mario
     Limonciello).

   - Make the ACPI processor idle driver check for architectural support
     for LPI to avoid using it on x86 by mistake (Mario Limonciello).

   - Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
     Bityutskiy).

   - Add 'preferred_cstates' module argument to the intel_idle driver to
     work around C1 and C1E handling issue on Sapphire Rapids (Artem
     Bityutskiy).

   - Add core C6 optimization on Sapphire Rapids to the intel_idle
     driver (Artem Bityutskiy).

   - Optimize the haltpoll cpuidle driver a bit (Li RongQing).

   - Remove leftover text from intel_idle() kerneldoc comment and fix up
     white space in intel_idle (Rafael Wysocki).

   - Fix load_image_and_restore() error path (Ye Bin).

   - Fix typos in comments in the system wakeup hadling code (Tom Rix).

   - Clean up non-kernel-doc comments in hibernation code (Jiapeng
     Chong).

   - Fix __setup handler error handling in system-wide suspend and
     hibernation core code (Randy Dunlap).

   - Add device name to suspend_report_result() (Youngjin Jang).

   - Make virtual guests honour ACPI S4 hardware signature by default
     (David Woodhouse).

   - Block power off of a parent PM domain unless child is in deepest
     state (Ulf Hansson).

   - Use dev_err_probe() to simplify error handling for generic PM
     domains (Ahmad Fatoum).

   - Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).

   - Document Intel uncore frequency scaling (Srinivas Pandruvada).

   - Add DTPM hierarchy description (Daniel Lezcano).

   - Change the locking scheme in DTPM (Daniel Lezcano).

   - Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
     release (Daniel Lezcano).

   - Make dtpm_node_callback[] static (kernel test robot).

   - Fix spelling mistake "initialze" -> "initialize" in
     dtpm_create_hierarchy() (Colin Ian King).

   - Add tracer tool for the amd-pstate driver (Jinzhou Su).

   - Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).

   - Add AMD P-State support to the cpupower utility (Huang Rui)"

* tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
  cpufreq: powernow-k8: Re-order the init checks
  cpuidle: intel_idle: Drop redundant backslash at line end
  cpuidle: intel_idle: Update intel_idle() kerneldoc comment
  PM: hibernate: Honour ACPI hardware signature by default for virtual guests
  cpufreq: intel_pstate: Use firmware default EPP
  cpufreq: unify show() and store() naming and use __ATTR_XX
  PM: core: keep irq flags in device_pm_check_callbacks()
  cpuidle: haltpoll: Call cpuidle_poll_state_init() later
  Documentation: amd-pstate: add tracer tool introduction
  tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
  tools/power/x86/intel_pstate_tracer: make tracer as a module
  cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
  PM: sleep: Add device name to suspend_report_result()
  turbostat: fix PC6 displaying on some systems
  intel_idle: add core C6 optimization for SPR
  intel_idle: add 'preferred_cstates' module argument
  intel_idle: add SPR support
  PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()
  ACPI: processor idle: Check for architectural support for LPI
  cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
  ...

Pull ACPI updates from Rafael Wysocki:
 "From the new functionality perspective, the most significant items
  here are the new driver for the 'ARM Generic Diagnostic Dump and
  Reset' device, the extension of fine grain fan control in the ACPI fan
  driver, and the change making it possible to use CPPC information to
  obtain CPU capacity.

  There are also a few new quirks, a bunch of fixes, including the
  platform-level _OSC handling change to make it actually take the
  platform firmware response into account, some code and documentation
  cleanups, and a notable update of the ACPI device enumeration
  documentation.

  Specifics:

   - Use uintptr_t and offsetof() in the ACPICA code to avoid compiler
     warnings regarding NULL pointer arithmetic (Rafael Wysocki).

   - Fix possible NULL pointer dereference in acpi_ns_walk_namespace()
     when passed "acpi=off" in the command line (Rafael Wysocki).

   - Fix and clean up acpi_os_read/write_port() (Rafael Wysocki).

   - Introduce acpi_bus_for_each_dev() and use it for walking all ACPI
     device objects in the Type C code (Rafael Wysocki).

   - Fix the _OSC platform capabilities negotioation and prevent CPPC
     from being used if the platform firmware indicates that it not
     supported via _OSC (Rafael Wysocki).

   - Use ida_alloc() instead of ida_simple_get() for ACPI enumeration of
     devices (Rafael Wysocki).

   - Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka
     Koskinen, Robert Kiraly).

   - Add power management debug messages related to suspend-to-idle in
     two places (Rafael Wysocki).

   - Fix __acpi_node_get_property_reference() return value and clean up
     that function (Andy Shevchenko, Sakari Ailus).

   - Fix return value of the __setup handler in the ACPI PM timer clock
     source driver (Randy Dunlap).

   - Clean up double words in two comments (Tom Rix).

   - Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and
     Nextbook Ares 8 (Hans de Goede).

   - Clean up frequency invariance handling on x86 in the ACPI CPPC
     library (Huang Rui).

   - Work around broken XSDT on the Advantech DAC-BJ01 board (Mark
     Cilissen).

   - Make wakeup events checks in the ACPI EC driver more
     straightforward and clean up acpi_ec_submit_event() (Rafael
     Wysocki).

   - Make it possible to obtain the CPU capacity with the help of CPPC
     information (Ionela Voinescu).

   - Improve fine grained fan control in the ACPI fan driver and
     document it (Srinivas Pandruvada).

   - Add device HID and quirk for Microsoft Surface Go 3 to the ACPI
     battery driver (Maximilian Luz).

   - Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
     the exact type of the controller (Andy Shevchenko).

   - Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
     Sembach).

   - Fix return value of __setup handlers in the APEI code (Randy
     Dunlap).

   - Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
     Koskinen).

   - Limit printable size of BERT table data (Darren Hart).

   - Fix up HEST and GHES initialization (Shuai Xue).

   - Update the ACPI device enumeration documentation and unify the ASL
     style in GPIO-related examples (Andy Shevchenko)"

* tag 'acpi-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
  clocksource: acpi_pm: fix return value of __setup handler
  ACPI: bus: Avoid using CPPC if not supported by firmware
  Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"
  ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU
  arm64, topology: enable use of init_cpu_capacity_cppc()
  arch_topology: obtain cpu capacity using information from CPPC
  x86, ACPI: rename init_freq_invariance_cppc() to arch_init_invariance_cppc()
  ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device
  ACPI: tables: Add AGDI to the list of known table signatures
  ACPI/APEI: Limit printable size of BERT table data
  ACPI: docs: gpio-properties: Unify ASL style for GPIO examples
  ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board
  ACPI: APEI: fix return value of __setup handlers
  x86/ACPI: CPPC: Move init_freq_invariance_cppc() into x86 CPPC
  x86: Expose init_freq_invariance() to topology header
  x86/ACPI: CPPC: Move AMD maximum frequency ratio setting function into x86 CPPC
  x86/ACPI: CPPC: Rename cppc_msr.c to cppc.c
  ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/L
  ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8
  ACPICA: Avoid walking the ACPI Namespace if it is not there
  ...