linux.git/drivers/usb, branch v3.10-rc5 Linux kernel source tree USB: option,zte_ev: move most ZTE CDMA devices to zte_ev 2013-06-06T16:06:25+00:00 Dan Williams dcbw@redhat.com 2013-06-05T20:26:27+00:00 73228a0538a70ebc4547bd09dee8971360dc1d87 Per some ZTE Linux drivers I found for the AC2716, the following patch moves most ZTE CDMA devices from option to zte_ev. The blacklist stuff that option does is not required with zte_ev, because it doesn't implement any of the send_setup hooks which the blacklist suppressed. I did not move the 2718 over because I could not find any ZTE Linux drivers for that device, nor even any Windows drivers. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Per some ZTE Linux drivers I found for the AC2716, the following patch
moves most ZTE CDMA devices from option to zte_ev.  The blacklist stuff
that option does is not required with zte_ev, because it doesn't
implement any of the send_setup hooks which the blacklist suppressed.

I did not move the 2718 over because I could not find any ZTE Linux
drivers for that device, nor even any Windows drivers.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: blacklist network interface on Huawei E1820 2013-06-06T16:02:36+00:00 Bjørn Mork bjorn@mork.no 2013-06-06T10:57:24+00:00 b8a24e6281d37243c06b9497dcbfaa98c1e2ad35 The mode used by Windows for the Huawei E1820 will use the same ff/ff/ff class codes for both serial and network functions. Reported-by: Graham Inggs <graham.inggs@uct.ac.za> Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The mode used by Windows for the Huawei E1820 will use the
same ff/ff/ff class codes for both serial and network
functions.

Reported-by: Graham Inggs <graham.inggs@uct.ac.za>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: whiteheat: fix broken port configuration 2013-06-06T16:02:36+00:00 Johan Hovold jhovold@gmail.com 2013-06-06T11:32:47+00:00 9eecf22d2b375b9064a20421c6c307b760b03d46 When configuring the port (e.g. set_termios) the port minor number rather than the port number was used in the request (and they only coincide for minor number 0). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When configuring the port (e.g. set_termios) the port minor number
rather than the port number was used in the request (and they only
coincide for minor number 0).

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: fix TIOCMIWAIT return value 2013-06-05T15:34:42+00:00 Johan Hovold jhovold@gmail.com 2013-06-05T10:21:11+00:00 f4488035abdac56682153aa0cff3d1dce84e1c54 Fix regression introduced by commit 143d9d9616 ("USB: serial: add tiocmiwait subdriver operation") which made the ioctl operation return ENODEV rather than ENOIOCTLCMD when a subdriver TIOCMIWAIT implementation is missing. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Fix regression introduced by commit 143d9d9616 ("USB: serial: add
tiocmiwait subdriver operation") which made the ioctl operation return
ENODEV rather than ENOIOCTLCMD when a subdriver TIOCMIWAIT
implementation is missing.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: mos7720: fix hardware flow control 2013-06-04T17:17:10+00:00 Johan Hovold jhovold@gmail.com 2013-06-04T16:50:31+00:00 a26f009a070e840fadacb91013b2391ba7ab6cc2 The register access to enable hardware flow control depends on the device port number and not the port minor number. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The register access to enable hardware flow control depends on the
device port number and not the port minor number.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: keyspan: remove unused endpoint-array access 2013-06-04T17:17:09+00:00 Johan Hovold jhovold@gmail.com 2013-06-04T16:50:30+00:00 c1ec1bcf0c97cdd4e25f16524c962fae9a4a39f9 Remove the no longer used endpoint-array access completely. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Remove the no longer used endpoint-array access completely.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: keyspan: fix bogus array index 2013-06-04T17:17:09+00:00 Johan Hovold jhovold@gmail.com 2013-06-04T16:50:29+00:00 a07088098a650267b2eda689538133a324b9523f The outcont_endpoints array was indexed using the port minor number (which can be greater than the array size) rather than the device port number. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The outcont_endpoints array was indexed using the port minor number
(which can be greater than the array size) rather than the device port
number.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: zte_ev: fix broken open 2013-06-04T17:17:09+00:00 Johan Hovold jhovold@gmail.com 2013-06-04T16:50:28+00:00 d8a1d0d54d5fdac0347b75e9afd554b3dfaa465f Remove bogus port-number check in open and close, which prevented this driver from being used with a minor number different from zero. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Remove bogus port-number check in open and close, which prevented this
driver from being used with a minor number different from zero.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: Add Option GTM681W to qcserial device table. 2013-06-03T17:33:22+00:00 Richard Weinberger richard@nod.at 2013-05-24T10:01:51+00:00 8a2f132a01c2dd4c3905fa560f92019761ed72b1 The Option GTM681W uses a qualcomm chip and can be served by the qcserial device driver. Signed-off-by: Richard Weinberger <richard@nod.at> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The Option GTM681W uses a qualcomm chip and can be
served by the qcserial device driver.

Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device 2013-06-03T17:33:10+00:00 Robert Butora robert.butora.fi@gmail.com 2013-05-31T15:09:51+00:00 6529591e3eef65f0f528a81ac169f6e294b947a7 The patch adds a new HIDCOM device and does not affect other devices driven by the cypress_M8 module. Changes are: - add VendorID ProductID to device tables - skip unstable speed check because FRWD uses 115200bps - skip reset at probe which is an issue workaround for this particular device. Signed-off-by: Robert Butora <robert.butora.fi@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The patch adds a new HIDCOM device and does not affect other devices
driven by the cypress_M8 module. Changes are:
- add VendorID ProductID to device tables
- skip unstable speed check because FRWD uses 115200bps
- skip reset at probe which is an issue workaround for this
particular device.

Signed-off-by: Robert Butora <robert.butora.fi@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>