linux.git/drivers/usb/typec, branch v5.11 Linux kernel source tree usb: typec: Send uevent for num_altmodes update 2021-01-07T13:22:22+00:00 Prashant Malani pmalani@chromium.org 2021-01-07T03:49:04+00:00 6c75c2bad36cfb43b144e6a0a76a69993c72097f Generate a change uevent when the "number_of_alternate_modes" sysfs file for partners and plugs is updated by a port driver. Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Benson Leung <bleung@chromium.org> Signed-off-by: Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20210107034904.4112029-1-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Generate a change uevent when the "number_of_alternate_modes" sysfs file
for partners and plugs is updated by a port driver.

Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Benson Leung <bleung@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210107034904.4112029-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: Fix copy paste error for NVIDIA alt-mode description 2021-01-07T13:19:12+00:00 Peter Robinson pbrobinson@gmail.com 2021-01-06T00:16:05+00:00 41952a66015466c3208aac96b14ffd92e0943589 The name of the module for the NVIDIA alt-mode is incorrect as it looks to be a copy-paste error from the entry above, update it to the correct typec_nvidia module name. Cc: Ajay Gupta <ajayg@nvidia.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Link: https://lore.kernel.org/r/20210106001605.167917-1-pbrobinson@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The name of the module for the NVIDIA alt-mode is incorrect as it
looks to be a copy-paste error from the entry above, update it to
the correct typec_nvidia module name.

Cc: Ajay Gupta <ajayg@nvidia.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20210106001605.167917-1-pbrobinson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: intel_pmc_mux: Configure HPD first for HPD+IRQ request 2020-12-28T14:44:26+00:00 Madhusudanarao Amara madhusudanarao.amara@intel.com 2020-12-16T14:09:18+00:00 0f041b8592daaaea46e91a8ebb3b47e6e0171fd8 Warm reboot scenarios some times type C Mux driver gets Mux configuration request as HPD=1,IRQ=1. In that scenario typeC Mux driver need to configure Mux as follows as per IOM requirement: (1). Confgiure Mux HPD = 1, IRQ = 0 (2). Configure Mux with HPD = 1, IRQ = 1 IOM expects TypeC Mux configuration as follows: (1). HPD=1, IRQ=0 (2). HPD=1, IRQ=1 if IOM gets mux config request (2) without configuring (1), it will ignore the request. The impact of this is there is no DP_alt mode display. Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect") Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Madhusudanarao Amara <madhusudanarao.amara@intel.com> Link: https://lore.kernel.org/r/20201216140918.49197-1-madhusudanarao.amara@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Warm reboot scenarios some times type C Mux driver gets Mux configuration
request as HPD=1,IRQ=1. In that scenario typeC Mux driver need to configure
Mux as follows as per IOM requirement:
 (1). Confgiure Mux HPD = 1, IRQ = 0
 (2). Configure Mux with HPD = 1, IRQ = 1

IOM expects TypeC Mux configuration as follows:
 (1). HPD=1, IRQ=0
 (2). HPD=1, IRQ=1
if IOM gets mux config request (2) without configuring (1), it will ignore
the request. The impact of this is there is no DP_alt mode display.

Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Madhusudanarao Amara <madhusudanarao.amara@intel.com>
Link: https://lore.kernel.org/r/20201216140918.49197-1-madhusudanarao.amara@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: ucsi: convert comma to semicolon 2020-12-11T15:19:54+00:00 Zheng Yongjun zhengyongjun3@huawei.com 2020-12-11T08:55:10+00:00 2eda5b5f96418d0a006aaa7812165b72c3226b8c Replace a comma between expression statements by a semicolon. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211085510.2928-1-zhengyongjun3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Replace a comma between expression statements by a semicolon.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201211085510.2928-1-zhengyongjun3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tcpm: convert comma to semicolon 2020-12-11T11:26:03+00:00 Zheng Yongjun zhengyongjun3@huawei.com 2020-12-11T08:55:53+00:00 b5206275b46c30a8236feb34a1dc247fa3683d83 Replace a comma between expression statements by a semicolon. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211085553.2982-1-zhengyongjun3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Replace a comma between expression statements by a semicolon.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201211085553.2982-1-zhengyongjun3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tcpm: Update vbus_vsafe0v on init 2020-12-11T10:24:12+00:00 Badhri Jagan Sridharan badhri@google.com 2020-12-11T07:19:11+00:00 3db4c21c0f71f7a51ce5c50f0d4d3742c9ec4a65 During init, vbus_vsafe0v does not get updated till the first connect as a sink. This causes TCPM to be stuck in SRC_ATTACH_WAIT state while booting with a sink (For instance: a headset) connected. [ 1.429168] Start toggling [ 1.439907] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 1.445242] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 53.358528] CC1: 0 -> 0, CC2: 0 -> 2 [state TOGGLING, polarity 0, connected] [ 53.358564] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS] Fix this by updating vbus_vsafe0v based on vbus_present status on boot. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20201211071911.2205197-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
During init, vbus_vsafe0v does not get updated till the first
connect as a sink. This causes TCPM to be stuck in SRC_ATTACH_WAIT
state while booting with a sink (For instance: a headset) connected.

[    1.429168] Start toggling
[    1.439907] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[    1.445242] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[   53.358528] CC1: 0 -> 0, CC2: 0 -> 2 [state TOGGLING, polarity 0, connected]
[   53.358564] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS]

Fix this by updating vbus_vsafe0v based on vbus_present status
on boot.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20201211071911.2205197-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled 2020-12-11T10:13:55+00:00 Badhri Jagan Sridharan badhri@google.com 2020-12-11T07:11:45+00:00 3b6c3d04808965167ff19d028789bc92a4b12c8c Auto discharge circuits kick in only when vbus decays and reaches VBUS_SINK_DISCONNECT_THRESHOLD threshold. Enable bleed discharge to discharge vbus to VBUS_SINK_DISCONNECT_THRESHOLD upon disconnect. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20201211071145.2199997-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Auto discharge circuits kick in only when vbus decays and reaches
VBUS_SINK_DISCONNECT_THRESHOLD threshold. Enable bleed discharge to
discharge vbus to VBUS_SINK_DISCONNECT_THRESHOLD upon disconnect.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20201211071145.2199997-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: Add class for plug alt mode device 2020-12-11T10:07:59+00:00 Prashant Malani pmalani@chromium.org 2020-12-10T21:16:54+00:00 ecf4d4310a16c32fee081924a1aebe9f4c7c0403 Add the Type C class for plug alternate mode devices which are being registered by the Type C connector class. This ensures that udev events get generated when the plug alt modes are registered. Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20201210211653.879044-1-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add the Type C class for plug alternate mode devices which are being
registered by the Type C connector class. This ensures that udev events
get generated when the plug alt modes are registered.

Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20201210211653.879044-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition 2020-12-11T09:51:38+00:00 Badhri Jagan Sridharan badhri@google.com 2020-12-10T16:05:21+00:00 ca955d3308ba111881d18bca7045aee964eac6ce "Table 4-19. POWER_CONTROL Register Definition" from tcpci spec defines BIT(3) as the control bit for bleed discharge. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Kyle Tso <kyletso@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Signed-off-by: Will McVicker <willmcvicker@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20201210160521.3417426-6-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
"Table 4-19. POWER_CONTROL Register Definition" from tcpci spec
defines BIT(3) as the control bit for bleed discharge.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Kyle Tso <kyletso@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20201210160521.3417426-6-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP 2020-12-11T09:51:38+00:00 Kyle Tso kyletso@google.com 2020-12-10T16:05:20+00:00 fe79d5de77204dd946cfad76a9bec23354b1a500 TCPM state machine needs 20-25ms to enter the ErrorRecovery state after tPSSourceOn timer timeouts. Change the timer from max 480ms to 450ms to ensure that the timer complies with the Spec. In order to keep the flexibility for other usecases using tPSSourceOn, add another timer only for PR_SWAP. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Signed-off-by: Will McVicker <willmcvicker@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20201210160521.3417426-5-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
TCPM state machine needs 20-25ms to enter the ErrorRecovery state after
tPSSourceOn timer timeouts. Change the timer from max 480ms to 450ms to
ensure that the timer complies with the Spec. In order to keep the
flexibility for other usecases using tPSSourceOn, add another timer only
for PR_SWAP.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20201210160521.3417426-5-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>