linux.git/drivers/usb/typec/ucsi, branch v6.9 Linux kernel source tree usb: typec: ucsi: Fix connector check on init 2024-04-04T13:17:13+00:00 Christian A. Ehrhardt lk@c--e.de 2024-04-01T21:05:15+00:00 ce4c8d21054ae9396cd759fe6e8157b525616dc4 Fix issues when initially checking for a connector change: - Use the correct connector number not the entire CCI. - Call ->read under the PPM lock. - Remove a bogus READ_ONCE. Fixes: 808a8b9e0b87 ("usb: typec: ucsi: Check for notifications after init") Cc: stable@kernel.org Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240401210515.1902048-1-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Fix issues when initially checking for a connector change:
- Use the correct connector number not the entire CCI.
- Call ->read under the PPM lock.
- Remove a bogus READ_ONCE.

Fixes: 808a8b9e0b87 ("usb: typec: ucsi: Check for notifications after init")
Cc: stable@kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240401210515.1902048-1-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: Check capabilities before cable and identity discovery 2024-03-26T14:01:15+00:00 Jameson Thies jthies@google.com 2024-03-15T17:18:35+00:00 0be3870f7cbbb5db4f062505f3f7dac9009946f3 Check the UCSI_CAP_GET_PD_MESSAGE bit before sending GET_PD_MESSAGE to discover partner and cable identity, check UCSI_CAP_CABLE_DETAILS before sending GET_CABLE_PROPERTY to discover the cable and check UCSI_CAP_ALT_MODE_DETAILS before registering the a cable plug. Additionally, move 8 bits from reserved_1 to features in the ucsi_capability struct. This makes the field 16 bits, still 8 short of the 24 bits allocated for it in UCSI v3.0, but it will not overflow because UCSI only defines 14 bits in bmOptionalFeatures. Fixes: 38ca416597b0 ("usb: typec: ucsi: Register cables based on GET_CABLE_PROPERTY") Link: https://lore.kernel.org/linux-usb/44e8142f-d9b3-487b-83fe-39deadddb492@linaro.org Suggested-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Jameson Thies <jthies@google.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240315171836.343830-2-jthies@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Check the UCSI_CAP_GET_PD_MESSAGE bit before sending GET_PD_MESSAGE to
discover partner and cable identity, check UCSI_CAP_CABLE_DETAILS before
sending GET_CABLE_PROPERTY to discover the cable and check
UCSI_CAP_ALT_MODE_DETAILS before registering the a cable plug. Additionally,
move 8 bits from reserved_1 to features in the ucsi_capability struct. This
makes the field 16 bits, still 8 short of the 24 bits allocated for it in
UCSI v3.0, but it will not overflow because UCSI only defines 14 bits in
bmOptionalFeatures.

Fixes: 38ca416597b0 ("usb: typec: ucsi: Register cables based on GET_CABLE_PROPERTY")
Link: https://lore.kernel.org/linux-usb/44e8142f-d9b3-487b-83fe-39deadddb492@linaro.org
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Jameson Thies <jthies@google.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240315171836.343830-2-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset 2024-03-26T14:00:48+00:00 Christian A. Ehrhardt lk@c--e.de 2024-03-20T07:39:26+00:00 3de4f996a0b5412aa451729008130a488f71563e Check the UCSI_CCI_RESET_COMPLETE complete flag before starting another reset. Use a UCSI_SET_NOTIFICATION_ENABLE command to clear the flag if it is set. Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Cc: stable <stable@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-6-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Check the UCSI_CCI_RESET_COMPLETE complete flag before starting
another reset. Use a UCSI_SET_NOTIFICATION_ENABLE command to clear
the flag if it is set.

Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240320073927.1641788-6-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi_acpi: Refactor and fix DELL quirk 2024-03-26T14:00:47+00:00 Christian A. Ehrhardt lk@c--e.de 2024-03-20T07:39:25+00:00 6aaceb7d9cd00f3e065dc4b054ecfe52c5253b03 Some DELL systems don't like UCSI_ACK_CC_CI commands with the UCSI_ACK_CONNECTOR_CHANGE but not the UCSI_ACK_COMMAND_COMPLETE bit set. The current quirk still leaves room for races because it requires two consecutive ACK commands to be sent. Refactor and significantly simplify the quirk to fix this: Send a dummy command and bundle the connector change ack with the command completion ack in a single UCSI_ACK_CC_CI command. This removes the need to probe for the quirk. While there define flag bits for struct ucsi_acpi->flags in ucsi_acpi.c and don't re-use definitions from ucsi.h for struct ucsi->flags. Fixes: f3be347ea42d ("usb: ucsi_acpi: Quirk to ack a connector change ack cmd") Cc: stable@vger.kernel.org Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-5-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Some DELL systems don't like UCSI_ACK_CC_CI commands with the
UCSI_ACK_CONNECTOR_CHANGE but not the UCSI_ACK_COMMAND_COMPLETE
bit set. The current quirk still leaves room for races because
it requires two consecutive ACK commands to be sent.

Refactor and significantly simplify the quirk to fix this:
Send a dummy command and bundle the connector change ack with the
command completion ack in a single UCSI_ACK_CC_CI command.
This removes the need to probe for the quirk.

While there define flag bits for struct ucsi_acpi->flags in ucsi_acpi.c
and don't re-use definitions from ucsi.h for struct ucsi->flags.

Fixes: f3be347ea42d ("usb: ucsi_acpi: Quirk to ack a connector change ack cmd")
Cc: stable@vger.kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240320073927.1641788-5-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: Ack unsupported commands 2024-03-26T14:00:44+00:00 Christian A. Ehrhardt lk@c--e.de 2024-03-20T07:39:24+00:00 6b5c85ddeea77d18c4b69e3bda60e9374a20c304 If a command completes the OPM must send an ack. This applies to unsupported commands, too. Send the required ACK for unsupported commands. Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Cc: stable <stable@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-4-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
If a command completes the OPM must send an ack. This applies
to unsupported commands, too.

Send the required ACK for unsupported commands.

Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240320073927.1641788-4-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: Check for notifications after init 2024-03-26T14:00:43+00:00 Christian A. Ehrhardt lk@c--e.de 2024-03-20T07:39:23+00:00 808a8b9e0b87bbc72bcc1f7ddfe5d04746e7ce56 The completion notification for the final SET_NOTIFICATION_ENABLE command during initialization can include a connector change notification. However, at the time this completion notification is processed, the ucsi struct is not ready to handle this notification. As a result the notification is ignored and the controller never sends an interrupt again. Re-check CCI for a pending connector state change after initialization is complete. Adjust the corresponding debug message accordingly. Fixes: 71a1fa0df2a3 ("usb: typec: ucsi: Store the notification mask") Cc: stable@vger.kernel.org Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-3-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The completion notification for the final SET_NOTIFICATION_ENABLE
command during initialization can include a connector change
notification.  However, at the time this completion notification is
processed, the ucsi struct is not ready to handle this notification.
As a result the notification is ignored and the controller
never sends an interrupt again.

Re-check CCI for a pending connector state change after
initialization is complete. Adjust the corresponding debug
message accordingly.

Fixes: 71a1fa0df2a3 ("usb: typec: ucsi: Store the notification mask")
Cc: stable@vger.kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240320073927.1641788-3-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: Clear EVENT_PENDING under PPM lock 2024-03-26T14:00:41+00:00 Christian A. Ehrhardt lk@c--e.de 2024-03-20T07:39:22+00:00 15b2e71b4653b3e13df34695a29ebeee237c5af2 Suppose we sleep on the PPM lock after clearing the EVENT_PENDING bit because the thread for another connector is executing a command. In this case the command completion of the other command will still report the connector change for our connector. Clear the EVENT_PENDING bit under the PPM lock to avoid another useless call to ucsi_handle_connector_change() in this case. Fixes: c9aed03a0a68 ("usb: ucsi: Add missing ppm_lock") Cc: stable <stable@kernel.org> Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-2-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Suppose we sleep on the PPM lock after clearing the EVENT_PENDING
bit because the thread for another connector is executing a command.
In this case the command completion of the other command will still
report the connector change for our connector.

Clear the EVENT_PENDING bit under the PPM lock to avoid another
useless call to ucsi_handle_connector_change() in this case.

Fixes: c9aed03a0a68 ("usb: ucsi: Add missing ppm_lock")
Cc: stable <stable@kernel.org>
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240320073927.1641788-2-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: Fix race between typec_switch and role_switch 2024-03-26T10:00:52+00:00 Krishna Kurapati quic_kriskura@quicinc.com 2024-03-01T04:09:14+00:00 f5e9bda03aa50ffad36eccafe893d004ef213c43 When orientation switch is enabled in ucsi glink, there is a xhci probe failure seen when booting up in host mode in reverse orientation. During bootup the following things happen in multiple drivers: a) DWC3 controller driver initializes the core in device mode when the dr_mode is set to DRD. It relies on role_switch call to change role to host. b) QMP driver initializes the lanes to TYPEC_ORIENTATION_NORMAL as a normal routine. It relies on the typec_switch_set call to get notified of orientation changes. c) UCSI core reads the UCSI_GET_CONNECTOR_STATUS via the glink and provides initial role switch to dwc3 controller. When booting up in host mode with orientation TYPEC_ORIENTATION_REVERSE, then we see the following things happening in order: a) UCSI gives initial role as host to dwc3 controller ucsi_register_port. Upon receiving this notification, the dwc3 core needs to program GCTL from PRTCAP_DEVICE to PRTCAP_HOST and as part of this change, it asserts GCTL Core soft reset and waits for it to be completed before shifting it to host. Only after the reset is done will the dwc3_host_init be invoked and xhci is probed. DWC3 controller expects that the usb phy's are stable during this process i.e., the phy init is already done. b) During the 100ms wait for GCTL core soft reset, the actual notification from PPM is received by ucsi_glink via pmic glink for changing role to host. The pmic_glink_ucsi_notify routine first sends the orientation change to QMP and then sends role to dwc3 via ucsi framework. This is happening exactly at the time GCTL core soft reset is being processed. c) When QMP driver receives typec switch to TYPEC_ORIENTATION_REVERSE, it then re-programs the phy at the instant GCTL core soft reset has been asserted by dwc3 controller due to which the QMP PLL lock fails in qmp_combo_usb_power_on. d) After the 100ms of GCTL core soft reset is completed, the dwc3 core goes for initializing the host mode and invokes xhci probe. But at this point the QMP is non-responsive and as a result, the xhci plat probe fails during xhci_reset. Fix this by passing orientation switch to available ucsi instances if their gpio configuration is available before ucsi_register is invoked so that by the time, the pmic_glink_ucsi_notify provides typec_switch to QMP, the lane is already configured and the call would be a NOP thus not racing with role switch. Cc: stable@vger.kernel.org Fixes: c6165ed2f425 ("usb: ucsi: glink: use the connector orientation GPIO to provide switch events") Suggested-by: Wesley Cheng <quic_wcheng@quicinc.com> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240301040914.458492-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When orientation switch is enabled in ucsi glink, there is a xhci
probe failure seen when booting up in host mode in reverse
orientation.

During bootup the following things happen in multiple drivers:

a) DWC3 controller driver initializes the core in device mode when the
dr_mode is set to DRD. It relies on role_switch call to change role to
host.

b) QMP driver initializes the lanes to TYPEC_ORIENTATION_NORMAL as a
normal routine. It relies on the typec_switch_set call to get notified
of orientation changes.

c) UCSI core reads the UCSI_GET_CONNECTOR_STATUS via the glink and
provides initial role switch to dwc3 controller.

When booting up in host mode with orientation TYPEC_ORIENTATION_REVERSE,
then we see the following things happening in order:

a) UCSI gives initial role as host to dwc3 controller ucsi_register_port.
Upon receiving this notification, the dwc3 core needs to program GCTL from
PRTCAP_DEVICE to PRTCAP_HOST and as part of this change, it asserts GCTL
Core soft reset and waits for it to be  completed before shifting it to
host. Only after the reset is done will the dwc3_host_init be invoked and
xhci is probed. DWC3 controller expects that the usb phy's are stable
during this process i.e., the phy init is already done.

b) During the 100ms wait for GCTL core soft reset, the actual notification
from PPM is received by ucsi_glink via pmic glink for changing role to
host. The pmic_glink_ucsi_notify routine first sends the orientation
change to QMP and then sends role to dwc3 via ucsi framework. This is
happening exactly at the time GCTL core soft reset is being processed.

c) When QMP driver receives typec switch to TYPEC_ORIENTATION_REVERSE, it
then re-programs the phy at the instant GCTL core soft reset has been
asserted by dwc3 controller due to which the QMP PLL lock fails in
qmp_combo_usb_power_on.

d) After the 100ms of GCTL core soft reset is completed, the dwc3 core
goes for initializing the host mode and invokes xhci probe. But at this
point the QMP is non-responsive and as a result, the xhci plat probe fails
during xhci_reset.

Fix this by passing orientation switch to available ucsi instances if
their gpio configuration is available before ucsi_register is invoked so
that by the time, the pmic_glink_ucsi_notify provides typec_switch to QMP,
the lane is already configured and the call would be a NOP thus not racing
with role switch.

Cc: stable@vger.kernel.org
Fixes: c6165ed2f425 ("usb: ucsi: glink: use the connector orientation GPIO to provide switch events")
Suggested-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240301040914.458492-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2024-03-21T19:35:20+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-21T19:35:20+00:00 e09bf86f3d53ecf4da61163d88036c4c16419d70 Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots of tiny changes and forward progress to support new hardware and better support for existing devices. Included in here are: - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more people start to use the hardware - default USB authentication mode Kconfig and documentation update to make it more obvious what is going on - USB typec updates and enhancements - usual dwc3 driver updates - usual xhci driver updates - function USB (i.e. gadget) driver updates and additions - new device ids for lots of drivers - loads of other small updates, full details in the shortlog All of these, including a "last minute regression fix" have been in linux-next with no reported issues" * tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits) usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic phy: tegra: xusb: Add API to retrieve the port number of phy USB: gadget: pxa27x_udc: Remove unused of_gpio.h usb: gadget/snps_udc_plat: Remove unused of_gpio.h usb: ohci-pxa27x: Remove unused of_gpio.h usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined usb: Clarify expected behavior of dev_bin_attrs_are_visible() xhci: Allow RPM on the USB controller (1022:43f7) by default usb: isp1760: remove SLAB_MEM_SPREAD flag usage usb: misc: onboard_hub: use pointer consistently in the probe function usb: gadget: fsl: Increase size of name buffer for endpoints usb: gadget: fsl: Add of device table to enable module autoloading usb: typec: tcpm: add support to set tcpc connector orientatition usb: typec: tcpci: add generic tcpci fallback compatible dt-bindings: usb: typec-tcpci: add tcpci fallback binding usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg} usb: core: Set connect_type of ports based on DT node dt-bindings: usb: Add downstream facing ports to realtek binding ... 
Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
  of tiny changes and forward progress to support new hardware and
  better support for existing devices. Included in here are:

   - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
     people start to use the hardware

   - default USB authentication mode Kconfig and documentation update to
     make it more obvious what is going on

   - USB typec updates and enhancements

   - usual dwc3 driver updates

   - usual xhci driver updates

   - function USB (i.e. gadget) driver updates and additions

   - new device ids for lots of drivers

   - loads of other small updates, full details in the shortlog

  All of these, including a "last minute regression fix" have been in
  linux-next with no reported issues"

* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
  usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
  usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
  usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
  phy: tegra: xusb: Add API to retrieve the port number of phy
  USB: gadget: pxa27x_udc: Remove unused of_gpio.h
  usb: gadget/snps_udc_plat: Remove unused of_gpio.h
  usb: ohci-pxa27x: Remove unused of_gpio.h
  usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
  usb: Clarify expected behavior of dev_bin_attrs_are_visible()
  xhci: Allow RPM on the USB controller (1022:43f7) by default
  usb: isp1760: remove SLAB_MEM_SPREAD flag usage
  usb: misc: onboard_hub: use pointer consistently in the probe function
  usb: gadget: fsl: Increase size of name buffer for endpoints
  usb: gadget: fsl: Add of device table to enable module autoloading
  usb: typec: tcpm: add support to set tcpc connector orientatition
  usb: typec: tcpci: add generic tcpci fallback compatible
  dt-bindings: usb: typec-tcpci: add tcpci fallback binding
  usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
  usb: core: Set connect_type of ports based on DT node
  dt-bindings: usb: Add downstream facing ports to realtek binding
  ...
usb: typec: ucsi: Register SOP' alternate modes with cable plug 2024-03-05T13:11:09+00:00 Jameson Thies jthies@google.com 2024-03-05T02:58:04+00:00 3dd85520736349dea2b4f3f78a60cf367af83f20 Register SOP' alternate modes with a Type-C Connector Class cable plug. Alternate modes are queried from the PPM using the GET_ALTERNATE_MODES command with recipient set to SOP'. Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Jameson Thies <jthies@google.com> Link: https://lore.kernel.org/r/20240305025804.1290919-5-jthies@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Register SOP' alternate modes with a Type-C Connector Class cable plug.
Alternate modes are queried from the PPM using the GET_ALTERNATE_MODES
command with recipient set to SOP'.

Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Jameson Thies <jthies@google.com>
Link: https://lore.kernel.org/r/20240305025804.1290919-5-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>