linux.git/drivers/usb/typec/ucsi, branch v6.5

usb: typec: ucsi: move typec_set_mode(TYPEC_STATE_SAFE) to ucsi_unregister_partner()

2023-07-25T15:39:26+00:00

It's better to set TYPEC_STATE_SAFE mode from ucsi_unregister_partner()
instead of ucsi_partner_change(), ucsi_unregister_partner() is always
when the partner disconnects.

Fixes: 25a2bc21c863 ("usb: typec: ucsi: call typec_set_mode on non-altmode partner change")
Suggested-by: Heikki Krogerus 
Signed-off-by: Neil Armstrong 
Reviewed-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20230626-topic-sm8550-usb-c-audio-fixup-v1-1-bc72fddf3f42@linaro.org
Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2023-07-03T20:23:10+00:00

Pull USB / Thunderbolt driver updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.

  Included in here are:

   - Lots of USB4/Thunderbolt additions and updates for new hardware
     types and fixes as people are starting to get access to the
     hardware in the wild

   - new gadget controller driver, cdns2, added

   - new typec drivers added

   - xhci driver updates

   - typec driver updates

   - usbip driver fixes

   - usb-serial driver updates and fixes

   - lots of smaller USB driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
  usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC
  usb: host: xhci: Do not re-initialize the XHCI HC if being removed
  usb: typec: nb7vpq904m: fix CONFIG_DRM dependency
  usbip: usbip_host: Replace strlcpy with strscpy
  usb: dwc3: gadget: Propagate core init errors to UDC during pullup
  USB: serial: option: add LARA-R6 01B PIDs
  usb: ulpi: Make container_of() no-op in to_ulpi_dev()
  usb: gadget: legacy: fix error return code in gfs_bind
  usb: typec: fsa4480: add support for Audio Accessory Mode
  usb: typec: fsa4480: rework mux & switch setup to handle more states
  usb: typec: ucsi: call typec_set_mode on non-altmode partner change
  USB: gadget: f_hid: make hidg_class a static const structure
  USB: gadget: f_printer: make usb_gadget_class a static const structure
  USB: mon: make mon_bin_class a static const structure
  USB: gadget: udc: core: make udc_class a static const structure
  USB: roles: make role_class a static const structure
  dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt
  dt-bindings: usb: Add StarFive JH7110 USB controller
  dt-bindings: usb: dwc3: Add IPQ9574 compatible
  usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"
  ...

Merge tag 'i2c-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2023-07-02T17:22:38+00:00

Pull i2c updates from Wolfram Sang:

 - I2C has now a co-maintainer taking care of the host drivers. Welcome
   Andi Shyti and have fun!

 - platform remove callback converted to return void in drivers

 - simplify drivers by using devm_clk_get_enabled()

 - introduce i2c_get_match_data() to avoid more boilerplate code
   (especially since the core stopped delivering an i2c_device_id)

 - and the usual bunch of driver updates

* tag 'i2c-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  i2c: uniphier: Use devm_clk_get_enabled()
  i2c: uniphier-f: Use devm_clk_get_enabled()
  i2c: owl: Use devm_clk_get_enabled()
  i2c: lpc2k: Use devm_clk_get_enabled()
  i2c: hix5hd2: Use devm_clk_get_enabled()
  i2c: sun6i-p2wi: Use devm_clk_get_enabled()
  i2c: pasemi-platform: Use devm_clk_get_enabled()
  i2c: mt7621: Use devm_clk_get_enabled()
  i2c: xiic: Use devm_clk_get_enabled()
  i2c: davinci: Use platform table macro over module_alias
  i2c: ocores: use devm_ managed clks
  i2c: nomadik: Use dev_err_probe() whenever possible
  i2c: nomadik: Use devm_clk_get_enabled()
  i2c: nomadik: Remove unnecessary goto label
  usb: typec: ucsi: Mark dGPUs as DEVICE scope
  i2c: wmt: Use devm_platform_get_and_ioremap_resource()
  i2c: versatile: Use devm_platform_get_and_ioremap_resource()
  i2c: hix5hd2: Add I2C_M_STOP flag support for i2c-hix5hd2 driver.
  i2c: mpc: Use of_property_read_reg() to parse "reg"
  i2c: imx-lpi2c: Don't open-code DIV_ROUND_UP
  ...

usb: typec: ucsi: call typec_set_mode on non-altmode partner change

2023-06-21T16:07:55+00:00

Add support for calling typec_set_mode() for the DEBUG, AUDIO
accessory modes.

Let's also call typec_set_mode() for USB as default and SAFE
when partner is disconnected.

The USB state is only called when ALT mode is specifically
not specified by the partner status flags in order
to leave the altmode handlers setup the proper mode to
switches, muxes and retimers.

Signed-off-by: Neil Armstrong 
Tested-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20230614-topic-sm8550-upstream-type-c-audio-v1-1-15a92565146b@linaro.org
Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: Mark dGPUs as DEVICE scope

2023-06-14T08:47:11+00:00

power_supply_is_system_supplied() checks whether any power
supplies are present that aren't batteries to decide whether
the system is running on DC or AC.  Downstream drivers use
this to make performance decisions.

Navi dGPUs include an UCSI function that has been exported
since commit 17631e8ca2d3 ("i2c: designware: Add driver
support for AMD NAVI GPU").

This UCSI function registers a power supply since commit
992a60ed0d5e ("usb: typec: ucsi: register with power_supply class")
but this is not a system power supply.

As the power supply for a dGPU is only for powering devices connected
to dGPU, create a device property to indicate that the UCSI endpoint
is only for the scope of `POWER_SUPPLY_SCOPE_DEVICE`.

Link: https://lore.kernel.org/lkml/20230516182541.5836-2-mario.limonciello@amd.com/
Reviewed-by: Evan Quan 
Tested-by: Evan Quan 
Signed-off-by: Mario Limonciello 
Reviewed-by: Heikki Krogerus 
Reviewed-by: Sebastian Reichel 
Acked-by: Andi Shyti 
Signed-off-by: Wolfram Sang

usb: typec: ucsi: Fix command cancellation

2023-06-13T09:52:51+00:00

The Cancel command was passed to the write callback as the
offset instead of as the actual command which caused NULL
pointer dereference.

Reported-by: Stephan Bolten 
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217517
Fixes: 094902bc6a3c ("usb: typec: ucsi: Always cancel the command if PPM reports BUSY condition")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus 
Message-ID: <20230606115802.79339-1-heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman

usb: Switch i2c drivers back to use .probe()

2023-05-29T14:53:11+00:00

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

While touching hd3ss3220.c fix a minor white space issue in the
definition of struct hd3ss3220_driver.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20230517181528.167115-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: correctly access opcode

2023-05-29T14:17:39+00:00

hdr->opcode is __le32 type, use le32_to_cpu() to cast opcode
to integer in the switch..case statement to fix the following
sparse warnings:

drivers/usb/typec/ucsi/ucsi_glink.c:248:20: sparse: warning: restricted __le32 degrades to integer
drivers/usb/typec/ucsi/ucsi_glink.c:248:20: sparse: warning: restricted __le32 degrades to integer
drivers/usb/typec/ucsi/ucsi_glink.c:248:20: sparse: warning: restricted __le32 degrades to integer

No functional change.

Signed-off-by: Min-Hua Chen 
Reviewed-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20230523162314.114274-1-minhuadotchen@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: Mark dGPUs as DEVICE scope

2023-05-29T14:17:34+00:00

power_supply_is_system_supplied() checks whether any power
supplies are present that aren't batteries to decide whether
the system is running on DC or AC.  Downstream drivers use
this to make performance decisions.

Navi dGPUs include an UCSI function that has been exported
since commit 17631e8ca2d3 ("i2c: designware: Add driver
support for AMD NAVI GPU").

This UCSI function registers a power supply since commit
992a60ed0d5e ("usb: typec: ucsi: register with power_supply class")
but this is not a system power supply.

As the power supply for a dGPU is only for powering devices connected
to dGPU, create a device property to indicate that the UCSI endpoint
is only for the scope of `POWER_SUPPLY_SCOPE_DEVICE`.

Link: https://lore.kernel.org/lkml/20230516182541.5836-2-mario.limonciello@amd.com/
Reviewed-by: Evan Quan 
Tested-by: Evan Quan 
Signed-off-by: Mario Limonciello 
Reviewed-by: Heikki Krogerus 
Reviewed-by: Sebastian Reichel 
Link: https://lore.kernel.org/r/20230518161150.92959-1-mario.limonciello@amd.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: acpi: Convert to platform remove callback returning void

2023-05-28T11:38:02+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To improve
here there is a quest to make the remove callback return void. In the first
step of this quest all drivers are converted to .remove_new() which already
returns void. Eventually after all drivers are converted, .remove_new() is
renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Acked-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20230517230239.187727-97-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman