linux.git/drivers/usb/typec/mux, branch v5.8

usb: typec: mux: intel_pmc_mux: Fix DP alternate mode entry

2020-06-18T08:40:57+00:00

The PMC needs to be notified separately about HPD (hotplug
detected) signal being high after mode entry. There is a bit
"HPD High" in the Alternate Mode Request that the driver
already sets, but that bit is only valid when the
DisplayPort Alternate Mode is directly entered from
disconnected state.

Fixes: 5c4edcdbcd97 ("usb: typec: mux: intel: Fix DP_HPD_LVL bit field")
Signed-off-by: Heikki Krogerus 
Cc: stable 
Tested-by: Prashant Malani 
Link: https://lore.kernel.org/r/20200529131753.15587-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2020-06-07T16:42:16+00:00

Pull USB/PHY driver updates from Greg KH:
 "Here are the large set of USB and PHY driver updates for 5.8-rc1.

  Nothing huge, just lots of little things:

   - USB gadget fixes and additions all over the place

   - new PHY drivers

   - PHY driver fixes and updates

   - XHCI driver updates

   - musb driver updates

   - more USB-serial driver ids added

   - various USB quirks added

   - thunderbolt minor updates and fixes

   - typec updates and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits)
  usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
  usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
  Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings"
  Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180"
  Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver"
  USB: serial: ch341: fix lockup of devices with limited prescaler
  USB: serial: ch341: add basis for quirk detection
  CDC-ACM: heed quirk also in error handling
  USB: serial: option: add Telit LE910C1-EUX compositions
  usb: musb: Fix runtime PM imbalance on error
  usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
  usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
  usb: musb: use true for 'use_dma'
  usb: musb: start session in resume for host port
  usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  USB: serial: qcserial: add DW5816e QDL support
  thunderbolt: Add trivial .shutdown
  usb: dwc3: keystone: Turn on USB3 PHY before controller
  dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
  dt-bindings: usb: convert keystone-usb.txt to YAML
  ...

Merge tag 'platform-drivers-x86-v5.8-1' of git://git.infradead.org/linux-platform-drivers-x86

2020-06-02T19:56:58+00:00

Pull x86 platform driver updates from Andy Shevchenko:

 - Add a support of the media keys on the ASUS laptop UX325JA/UX425JA

 - ASUS WMI driver can now handle 2-in-1 models T100TA, T100CHI, T100HA,
   T200TA

 - Big refactoring of Intel SCU driver with Elkhart Lake support has
   been added

 - Slim Bootloarder firmware update signaling WMI driver has been added

 - Thinkpad ACPI driver can handle dual fan configuration on new P and X
   models

 - Touchscreen DMI driver has been extended to support
    - MP-man MPWIN895CL tablet
    - ONDA V891 v5 tablet
    - techBite Arc 11.6
    - Trekstor Twin 10.1
    - Trekstor Yourbook C11B
    - Vinga J116

 - Virtual Button driver got a few fixes to detect mode of 2-in-1 tablet
   models

 - Intel Speed Select tools update

 - Plenty of small cleanups here and there

* tag 'platform-drivers-x86-v5.8-1' of git://git.infradead.org/linux-platform-drivers-x86: (89 commits)
  platform/x86: dcdbas: Check SMBIOS for protected buffer address
  platform/x86: asus_wmi: Reserve more space for struct bias_args
  platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type
  platform/x86: intel-hid: Add a quirk to support HP Spectre X2 (2015)
  platform/x86: touchscreen_dmi: Update Trekstor Twin 10.1 entry
  platform/x86: touchscreen_dmi: Add info for the Trekstor Yourbook C11B
  platform/x86: hp-wmi: Introduce HPWMI_POWER_FW_OR_HW as convenient shortcut
  platform/x86: hp-wmi: Convert simple_strtoul() to kstrtou32()
  platform/x86: hp-wmi: Refactor postcode_store() to follow standard patterns
  platform/x86: acerhdf: replace space by * in modalias
  platform/x86: ISST: Increase timeout
  tools/power/x86/intel-speed-select: Fix invalid core mask
  tools/power/x86/intel-speed-select: Increase CPU count
  tools/power/x86/intel-speed-select: Fix json perf-profile output output
  platform/x86: dell-wmi: Ignore keyboard attached / detached events
  platform/x86: dell-laptop: don't register micmute LED if there is no token
  platform/x86: thinkpad_acpi: Replace custom approach by kstrtoint()
  platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write()
  platform/x86: thinkpad_acpi: Replace next_cmd(&buf) with strsep(&buf, ",")
  platform/x86: intel-vbtn: Detect switch position before registering the input-device
  ...

Merge 5.7-rc6 into usb-next

2020-05-18T05:55:55+00:00

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman

usb: typec: mux: intel: Fix DP_HPD_LVL bit field

2020-05-13T12:33:51+00:00

According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
0.6, the PMC HPD request LVL bit field is bit 4.
Fix the definition here to match the programming guide.

Since this bit field is changing, explicitly define a field for the
HPD_HIGH mode data bit.

Signed-off-by: Prashant Malani 
Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
Reviewed-by: Benson Leung 
Acked-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20200511091837.102508-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman

usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation

2020-05-13T12:20:49+00:00

The SBU and HSL orientation may be fixed/static from the mux
PoW. Apparently the retimer may take care of the orientation
of these lines. Handling the static SBU (AUX) and HSL
orientation with device properties.

If the SBU orientation is static, a device property
"sbu-orintation" can be used. When the property exists, the
driver always sets the SBU orientation according to the
property value, and when it's not set, the driver uses the
cable plug orientation with SBU.

And with static HSL orientation, "hsl-orientation" device
property can be used in the same way.

Signed-off-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20200507150900.12102-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: mux: intel: Handle alt mode HPD_HIGH

2020-05-05T11:06:46+00:00

According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
0.6, when a device is transitioning to DP Alternate Mode state, if the
HPD_STATE (bit 7) field in the status update command VDO is set to
HPD_HIGH, the HPD_HIGH field in the Alternate Mode request “mode_data”
field (bit 14) should also be set. Ensure the bit is correctly handled
while issuing the Alternate Mode request.

Signed-off-by: Prashant Malani 
Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
Acked-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20200429054432.134178-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman

usb: typec: intel_pmc_mux: Fix the property names

2020-05-05T11:06:46+00:00

The device property names for the port index number are
"usb2-port-number" and "usb3-port-number", not "usb2-port"
and "usb3-port".

Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
Signed-off-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20200430135657.45169-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: mux: Convert the Intel PMC Mux driver to use new SCU IPC API

2020-04-24T10:18:12+00:00

Convert the driver to use the new SCU IPC API. This allows us to get rid
of the duplicate PMC IPC implementation which is now covered in SCU IPC
driver.

Signed-off-by: Heikki Krogerus 
Signed-off-by: Mika Westerberg 
Signed-off-by: Lee Jones

usb: typec: pi3usb30532: Set switch_ / mux_desc name field to NULL

2020-04-16T12:52:09+00:00

Since commit ef441dd6af91 ("usb: typec: mux: Allow the muxes to be named")
the typec_switch_desc and typec_mux_desc structs contain a name field.

The pi3usb30532 driver allocates these structs on the stack and so far did
not explicitly zero the mem used for the structs. This causes the new name
fields to point to a random memory address, which in my test case happens
to be a valid address leading to "interesting" mux / switch names:

[root@localhost ~]# ls -l /sys/class/typec_mux/
total 0
lrwxrwxrwx. 1 root root 0 Apr 14 12:55 ''$'\r''-switch' -> ...
lrwxrwxrwx. 1 root root 0 Apr 14 12:55 ''$'\320\302\006''2'$'...

Explicitly initialize the structs to zero when declaring them on the stack
so that any unused fields get set to 0, fixing this.

Fixes: ef441dd6af91 ("usb: typec: mux: Allow the muxes to be named")
Signed-off-by: Hans de Goede 
Acked-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20200414133313.131802-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman