linux.git/drivers/usb/typec/mux, branch v5.19

usb: typec: mux: Add On Semi fsa4480 driver

2022-04-26T11:47:13+00:00

The ON Semiconductor FSA4480 is a USB Type-C port multimedia switch with
support for analog audio headsets. It allows sharing a common USB Type-C
port to pass USB2.0 signal, analog audio, sideband use wires and analog
microphone signal.

Due to lacking upstream audio support for testing, the audio muxing is
left untouched, but implementation of muxing the SBU lines is provided
as a pair of Type-C mux and switch devices. This provides the necessary
support for enabling the DisplayPort altmode on devices with this
circuit.

Reviewed-by: Heikki Krogerus 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20220422222351.1297276-8-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman

usb: typec: mux: Introduce indirection

2022-04-26T11:47:13+00:00

Rather than directly exposing the implementation's representation of the
typec muxes to the controller/clients, introduce an indirection object.

This enables the introduction of turning this relationship into a
one-to-many in the following patch.

Acked-by: Heikki Krogerus 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20220422222351.1297276-5-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman

usb: typec: mux: intel_pmc_mux: Add retry logic to a PMC command

2022-04-21T16:28:00+00:00

There are few scenerio when PMC reports 'busy condition' and command
fail.

If PMC receives a high priority command while servicing a low priority
command then it discards the low priority command and start servicing
the high priority command. The lower priority command fail and driver
returns error. If the same command resend to the PMC then PMC latches
the command and service it accordingly.

Thus adds the retry logic for the PMC command.

Reviewed-by: Heikki Krogerus 
Signed-off-by: Tanveer Alam 
Link: https://lore.kernel.org/r/20220328105137.6223-1-tanveer1.alam@intel.com
Signed-off-by: Greg Kroah-Hartman

Merge tag 'v5.13-rc6' into usb-next

2021-06-14T07:18:07+00:00

We want the usb fixes in here as well, and this resolves some merge
issues with:
	drivers/usb/dwc3/debugfs.c
	drivers/usb/dwc3/gadget.c

Signed-off-by: Greg Kroah-Hartman

usb: typec: intel_pmc_mux: Put ACPI device using acpi_dev_put()

2021-06-09T08:56:14+00:00

For ACPI devices we have a symmetric API to put them, so use it in the driver.

Reviewed-by: Heikki Krogerus 
Signed-off-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20210607205007.71458-3-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource()

2021-06-09T08:56:11+00:00

devm_ioremap_resource() can return an error, add missed check for it.

Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect")
Reviewed-by: Heikki Krogerus 
Signed-off-by: Andy Shevchenko 
Cc: stable 
Link: https://lore.kernel.org/r/20210607205007.71458-2-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe()

2021-06-09T08:56:08+00:00

device_get_next_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.

Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
Cc: Heikki Krogerus 
Reviewed-by: Heikki Krogerus 
Signed-off-by: Andy Shevchenko 
Cc: stable 
Link: https://lore.kernel.org/r/20210607205007.71458-1-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: intel_pmc_mux: Update IOM port status offset for AlderLake

2021-06-03T11:55:30+00:00

Intel AlderLake(ADL) IOM has a different IOM port status offset than
Intel TigerLake.
Add a new ACPI ID for ADL and use the IOM port status offset as per
the platform.

Acked-by: Heikki Krogerus 
Signed-off-by: Azhar Shaikh 
Link: https://lore.kernel.org/r/20210601035843.71150-1-azhar.shaikh@intel.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: intel_pmc_mux: Configure HPD first for HPD+IRQ request

2020-12-28T14:44:26+00:00

Warm reboot scenarios some times type C Mux driver gets Mux configuration
request as HPD=1,IRQ=1. In that scenario typeC Mux driver need to configure
Mux as follows as per IOM requirement:
 (1). Confgiure Mux HPD = 1, IRQ = 0
 (2). Configure Mux with HPD = 1, IRQ = 1

IOM expects TypeC Mux configuration as follows:
 (1). HPD=1, IRQ=0
 (2). HPD=1, IRQ=1
if IOM gets mux config request (2) without configuring (1), it will ignore
the request. The impact of this is there is no DP_alt mode display.

Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus 
Signed-off-by: Madhusudanarao Amara 
Link: https://lore.kernel.org/r/20201216140918.49197-1-madhusudanarao.amara@intel.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: intel_pmc_mux: Configure cable generation value for USB4

2020-12-10T15:03:37+00:00

USB4 specification chapter 3 indicates that cable data rates have to be
rounded for USB4 device to operate as USB4.
With that configure cable generation value to use rounded data rates for
USB4.

Reviewed-by: Heikki Krogerus 
Signed-off-by: Utkarsh Patel 
Link: https://lore.kernel.org/r/20201209042408.23079-2-utkarsh.h.patel@intel.com
Signed-off-by: Greg Kroah-Hartman