linux.git/drivers/usb/typec/altmodes, branch v6.7

Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2023-11-04T02:00:42+00:00

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
  Nothing really major in here, just lots of constant development for
  new hardware. Included in here are:

   - Thunderbolt (i.e. USB4) fixes for reported issues and support for
     new hardware types and devices

   - USB typec additions of new drivers and cleanups for some existing
     ones

   - xhci cleanups and expanded tracing support and some platform
     specific updates

   - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
     spi, and i2c drivers for that type of device (all acked by the
     respective subsystem maintainers.)

   - lots of USB gadget driver updates and cleanups

   - new USB dwc3 platforms supported, as well as other dwc3 fixes and
     cleanups

   - USB chipidea driver updates

   - other smaller driver cleanups and additions, full details in the
     shortlog

  All of these have been in the linux-next tree for a while with no
  reported problems"

* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
  usb: gadget: uvc: Add missing initialization of ssp config descriptor
  usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
  usb: raw-gadget: report suspend, resume, reset, and disconnect events
  usb: raw-gadget: don't disable device if usb_ep_queue fails
  usb: raw-gadget: properly handle interrupted requests
  usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
  usb: gadget: aspeed_udc: Convert to platform remove callback returning void
  dt-bindings: usb: fsa4480: Add compatible for OCP96011
  usb: typec: fsa4480: Add support to swap SBU orientation
  dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
  usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
  Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
  Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
  thunderbolt: Fix one kernel-doc comment
  usb: gadget: f_ncm: Always set current gadget in ncm_bind()
  usb: core: Remove duplicated check in usb_hub_create_port_device
  usb: typec: tcpm: Add additional checks for contaminant
  arm64: dts: rockchip: rk3588s: Add USB3 host controller
  usb: dwc3: add optional PHY interface clocks
  dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
  ...

usb: typec: altmodes/displayport: fixup drm internal api change vs new user.

2023-10-26T21:55:41+00:00

usb: typec: altmodes/displayport: Signal hpd low when exiting mode
and
drm: Add HPD state to drm_connector_oob_hotplug_event()

sideswiped each other.

Signal disconnected always.

Signed-off-by: Dave Airlie

BackMerge tag 'v6.6-rc7' into drm-next

2023-10-23T08:20:06+00:00

This is needed to add the msm pr which is based on a higher base.

Signed-off-by: Dave Airlie

Merge 6.6-rc6 into usb-next

2023-10-16T15:36:12+00:00

We need the USB and Thunderbolt fixes in here as well.

Signed-off-by: Greg Kroah-Hartman

drm: Add HPD state to drm_connector_oob_hotplug_event()

2023-10-11T10:20:22+00:00

In some implementations, such as the Qualcomm platforms, the display
driver has no way to query the current HPD state and as such it's
impossible to distinguish between disconnect and attention events.

Add a parameter to drm_connector_oob_hotplug_event() to pass the HPD
state.

Also push the test for unchanged state in the displayport altmode driver
into the i915 driver, to allow other drivers to act upon each update.

Signed-off-by: Bjorn Andersson 
Reviewed-by: Hans de Goede 
Acked-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20231009174048.2695981-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov 
Link: https://patchwork.freedesktop.org/patch/msgid/20231009174048.2695981-2-dmitry.baryshkov@linaro.org

usb: typec: altmodes/displayport: Signal hpd low when exiting mode

2023-10-11T09:38:06+00:00

Upon receiving an ACK for a sent EXIT_MODE message, the DisplayPort
driver currently resets the status and configuration of the port partner.
The hpd signal is not updated despite being part of the status, so the
Display stack can still transmit video despite typec_altmode_exit placing
the lanes in a Safe State.

Set hpd to low when a sent EXIT_MODE message is ACK'ed.

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera 
Acked-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20231009210057.3773877-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: Add Displayport Alternate Mode 2.1 Support

2023-10-02T11:58:58+00:00

Displayport Alternate mode 2.1 requires configuration for additional
cable details such as signalling for cable, UHBR13.5 Support, Cable type
and DPAM version.
These details can be used with mux drivers to configure SOP DP
configuration for Displayport Alternate mode 2.1.
This change also includes pertinent cable signalling support in displayport
alternate mode.

Reviewed-by: Andy Shevchenko 
Reviewed-by: Heikki Krogerus 
Signed-off-by: Utkarsh Patel 
Link: https://lore.kernel.org/r/20230920023243.2494410-2-utkarsh.h.patel@intel.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: altmodes/displayport: add support for embedded DP cases

2023-08-22T12:45:53+00:00

In the embedded cases, the DisplayPort connector is handled by the TCPM
itself. It was proposed to add the "displayport" OF property to the DT
bindings, but it  was rejected in favour of properly describing the
electrical signal path using of_graph.

Fallback to the controller fwnode for HPD notifications to
support such usecases without requiring additional DT properties.

Signed-off-by: Dmitry Baryshkov 
Link: https://lore.kernel.org/r/20230817150824.14371-2-dmitry.baryshkov@linaro.org
Signed-off-by: Greg Kroah-Hartman

usb: typec: altmodes/displayport: Signal hpd when configuring pin assignment

2023-08-04T12:54:54+00:00

When connecting to some DisplayPort partners, the initial status update
after entering DisplayPort Alt Mode notifies that the DFP_D/UFP_D is not in
the connected state. This leads to sending a configure message that keeps
the device in USB mode. The port partner then sets DFP_D/UFP_D to the
connected state and HPD to high in the same Attention message. Currently,
the HPD signal is dropped in order to handle configuration.

This patch saves changes to the HPD signal when the device chooses to
configure during dp_altmode_status_update, and invokes sysfs_notify if
necessary for HPD after configuring.

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera 
Acked-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20230726020903.1409072-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: altmodes/displayport: fix pin_assignment_show

2023-05-13T09:45:56+00:00

This patch fixes negative indexing of buf array in pin_assignment_show
when get_current_pin_assignments returns 0 i.e. no compatible pin
assignments are found.

BUG: KASAN: use-after-free in pin_assignment_show+0x26c/0x33c
...
Call trace:
dump_backtrace+0x110/0x204
dump_stack_lvl+0x84/0xbc
print_report+0x358/0x974
kasan_report+0x9c/0xfc
__do_kernel_fault+0xd4/0x2d4
do_bad_area+0x48/0x168
do_tag_check_fault+0x24/0x38
do_mem_abort+0x6c/0x14c
el1_abort+0x44/0x68
el1h_64_sync_handler+0x64/0xa4
el1h_64_sync+0x78/0x7c
pin_assignment_show+0x26c/0x33c
dev_attr_show+0x50/0xc0

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: Badhri Jagan Sridharan 
Reviewed-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20230508214443.893436-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman