linux.git/drivers/usb/typec/altmodes, branch v6.6 Linux kernel source tree usb: typec: altmodes/displayport: Signal hpd low when exiting mode 2023-10-11T09:38:06+00:00 RD Babiera rdbabiera@google.com 2023-10-09T21:00:58+00:00 89434b069e460967624903b049e5cf5c9e6b99b9 Upon receiving an ACK for a sent EXIT_MODE message, the DisplayPort driver currently resets the status and configuration of the port partner. The hpd signal is not updated despite being part of the status, so the Display stack can still transmit video despite typec_altmode_exit placing the lanes in a Safe State. Set hpd to low when a sent EXIT_MODE message is ACK'ed. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20231009210057.3773877-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Upon receiving an ACK for a sent EXIT_MODE message, the DisplayPort
driver currently resets the status and configuration of the port partner.
The hpd signal is not updated despite being part of the status, so the
Display stack can still transmit video despite typec_altmode_exit placing
the lanes in a Safe State.

Set hpd to low when a sent EXIT_MODE message is ACK'ed.

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231009210057.3773877-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: altmodes/displayport: add support for embedded DP cases 2023-08-22T12:45:53+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2023-08-17T15:08:23+00:00 0bd9e0219bf0764149eb83826c774162c09e74de In the embedded cases, the DisplayPort connector is handled by the TCPM itself. It was proposed to add the "displayport" OF property to the DT bindings, but it was rejected in favour of properly describing the electrical signal path using of_graph. Fallback to the controller fwnode for HPD notifications to support such usecases without requiring additional DT properties. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230817150824.14371-2-dmitry.baryshkov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
In the embedded cases, the DisplayPort connector is handled by the TCPM
itself. It was proposed to add the "displayport" OF property to the DT
bindings, but it  was rejected in favour of properly describing the
electrical signal path using of_graph.

Fallback to the controller fwnode for HPD notifications to
support such usecases without requiring additional DT properties.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230817150824.14371-2-dmitry.baryshkov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: altmodes/displayport: Signal hpd when configuring pin assignment 2023-08-04T12:54:54+00:00 RD Babiera rdbabiera@google.com 2023-07-26T02:09:02+00:00 5a5ccd61cfd76156cb3e0373c300c509d05448ce When connecting to some DisplayPort partners, the initial status update after entering DisplayPort Alt Mode notifies that the DFP_D/UFP_D is not in the connected state. This leads to sending a configure message that keeps the device in USB mode. The port partner then sets DFP_D/UFP_D to the connected state and HPD to high in the same Attention message. Currently, the HPD signal is dropped in order to handle configuration. This patch saves changes to the HPD signal when the device chooses to configure during dp_altmode_status_update, and invokes sysfs_notify if necessary for HPD after configuring. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230726020903.1409072-1-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When connecting to some DisplayPort partners, the initial status update
after entering DisplayPort Alt Mode notifies that the DFP_D/UFP_D is not in
the connected state. This leads to sending a configure message that keeps
the device in USB mode. The port partner then sets DFP_D/UFP_D to the
connected state and HPD to high in the same Attention message. Currently,
the HPD signal is dropped in order to handle configuration.

This patch saves changes to the HPD signal when the device chooses to
configure during dp_altmode_status_update, and invokes sysfs_notify if
necessary for HPD after configuring.

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230726020903.1409072-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: altmodes/displayport: fix pin_assignment_show 2023-05-13T09:45:56+00:00 Badhri Jagan Sridharan badhri@google.com 2023-05-08T21:44:43+00:00 d8f28269dd4bf9b55c3fb376ae31512730a96fce This patch fixes negative indexing of buf array in pin_assignment_show when get_current_pin_assignments returns 0 i.e. no compatible pin assignments are found. BUG: KASAN: use-after-free in pin_assignment_show+0x26c/0x33c ... Call trace: dump_backtrace+0x110/0x204 dump_stack_lvl+0x84/0xbc print_report+0x358/0x974 kasan_report+0x9c/0xfc __do_kernel_fault+0xd4/0x2d4 do_bad_area+0x48/0x168 do_tag_check_fault+0x24/0x38 do_mem_abort+0x6c/0x14c el1_abort+0x44/0x68 el1h_64_sync_handler+0x64/0xa4 el1h_64_sync+0x78/0x7c pin_assignment_show+0x26c/0x33c dev_attr_show+0x50/0xc0 Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230508214443.893436-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch fixes negative indexing of buf array in pin_assignment_show
when get_current_pin_assignments returns 0 i.e. no compatible pin
assignments are found.

BUG: KASAN: use-after-free in pin_assignment_show+0x26c/0x33c
...
Call trace:
dump_backtrace+0x110/0x204
dump_stack_lvl+0x84/0xbc
print_report+0x358/0x974
kasan_report+0x9c/0xfc
__do_kernel_fault+0xd4/0x2d4
do_bad_area+0x48/0x168
do_tag_check_fault+0x24/0x38
do_mem_abort+0x6c/0x14c
el1_abort+0x44/0x68
el1h_64_sync_handler+0x64/0xa4
el1h_64_sync+0x78/0x7c
pin_assignment_show+0x26c/0x33c
dev_attr_show+0x50/0xc0

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230508214443.893436-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: altmodes/displayport: Fix configure initial pin assignment 2023-04-05T17:20:12+00:00 RD Babiera rdbabiera@google.com 2023-03-29T21:51:59+00:00 eddebe39602efe631b83ff8d03f26eba12cfd760 While determining the initial pin assignment to be sent in the configure message, using the DP_PIN_ASSIGN_DP_ONLY_MASK mask causes the DFP_U to send both Pin Assignment C and E when both are supported by the DFP_U and UFP_U. The spec (Table 5-7 DFP_U Pin Assignment Selection Mandates, VESA DisplayPort Alt Mode Standard v2.0) indicates that the DFP_U never selects Pin Assignment E when Pin Assignment C is offered. Update the DP_PIN_ASSIGN_DP_ONLY_MASK conditional to intially select only Pin Assignment C if it is available. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230329215159.2046932-1-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
While determining the initial pin assignment to be sent in the configure
message, using the DP_PIN_ASSIGN_DP_ONLY_MASK mask causes the DFP_U to
send both Pin Assignment C and E when both are supported by the DFP_U and
UFP_U. The spec (Table 5-7 DFP_U Pin Assignment Selection Mandates,
VESA DisplayPort Alt Mode Standard v2.0) indicates that the DFP_U never
selects Pin Assignment E when Pin Assignment C is offered.

Update the DP_PIN_ASSIGN_DP_ONLY_MASK conditional to intially select only
Pin Assignment C if it is available.

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230329215159.2046932-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge 6.2-rc8 into usb-next 2023-02-14T12:44:08+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2023-02-14T12:44:08+00:00 c4a07e264d38d5cad5d77298957cbd7d7db70b1f We need the USB fixes in here for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We need the USB fixes in here for testing.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: altmodes/displayport: Fix probe pin assign check 2023-02-09T12:23:39+00:00 Prashant Malani pmalani@chromium.org 2023-02-08T20:53:19+00:00 54e5c00a4eb0a4c663445b245f641bbfab142430 While checking Pin Assignments of the port and partner during probe, we don't take into account whether the peripheral is a plug or receptacle. This manifests itself in a mode entry failure on certain docks and dongles with captive cables. For instance, the Startech.com Type-C to DP dongle (Model #CDP2DP) advertises its DP VDO as 0x405. This would fail the Pin Assignment compatibility check, despite it supporting Pin Assignment C as a UFP. Update the check to use the correct DP Pin Assign macros that take the peripheral's receptacle bit into account. Fixes: c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles") Cc: stable@vger.kernel.org Reported-by: Diana Zigterman <dzigterman@chromium.org> Signed-off-by: Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20230208205318.131385-1-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
While checking Pin Assignments of the port and partner during probe, we
don't take into account whether the peripheral is a plug or receptacle.

This manifests itself in a mode entry failure on certain docks and
dongles with captive cables. For instance, the Startech.com Type-C to DP
dongle (Model #CDP2DP) advertises its DP VDO as 0x405. This would fail
the Pin Assignment compatibility check, despite it supporting
Pin Assignment C as a UFP.

Update the check to use the correct DP Pin Assign macros that
take the peripheral's receptacle bit into account.

Fixes: c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles")
Cc: stable@vger.kernel.org
Reported-by: Diana Zigterman <dzigterman@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20230208205318.131385-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: altmodes/displayport: Update active state 2023-01-24T17:15:43+00:00 Prashant Malani pmalani@chromium.org 2023-01-20T20:58:26+00:00 25d6d1bfc213bce03d2e34c9e43477e01ffba7c3 Update the altmode "active" state when we receive Acks for Enter and Exit Mode commands. Having the right state is necessary to change Pin Assignments using the 'pin_assignment" sysfs file. Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20230120205827.740900-1-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Update the altmode "active" state when we receive Acks for Enter and
Exit Mode commands. Having the right state is necessary to change Pin
Assignments using the 'pin_assignment" sysfs file.

Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20230120205827.740900-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge 6.2-rc5 into usb-next 2023-01-23T14:38:08+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2023-01-23T14:38:08+00:00 e3e9fc7fa7ad221cc2e7b207d514cc84ed393251 We need the USB fixes in here and this resolves merge conflicts as reported in linux-next in the following files: drivers/usb/host/xhci.c drivers/usb/host/xhci.h drivers/usb/typec/ucsi/ucsi.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We need the USB fixes in here and this resolves merge conflicts as
reported in linux-next in the following files:
	drivers/usb/host/xhci.c
	drivers/usb/host/xhci.h
	drivers/usb/typec/ucsi/ucsi.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: altmodes/displayport: Use proper macro for pin assignment check 2023-01-17T16:07:25+00:00 Prashant Malani pmalani@chromium.org 2023-01-11T02:05:43+00:00 85af23df903ee14bfcba60c53e4f3b640f2310f8 While looking at the DP configuration VDO to determine the peripheral configuration, the spec (Table 8-5: DisplayPort Configurations, VESA DisplayPort Alt Mode Standard v2.0) lists the options as "UFP_U as a DP Source/Sink Device". So, use the correct macro while performing this check. Effectively it's the same as the existing code, but the proposed macro describes the state a little better. No functional changes introduced. Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230111020546.3384569-3-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
While looking at the DP configuration VDO to determine the peripheral
configuration, the spec (Table 8-5: DisplayPort Configurations, VESA
DisplayPort Alt Mode Standard v2.0) lists the options as "UFP_U as a DP
Source/Sink Device".

So, use the correct macro while performing this check. Effectively it's
the same as the existing code, but the proposed macro describes the
state a little better.

No functional changes introduced.

Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230111020546.3384569-3-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>