linux.git/drivers/usb/storage, branch v5.17 Linux kernel source tree usb-storage: Add unusual-devs entry for VL817 USB-SATA bridge 2022-01-25T17:42:52+00:00 Alan Stern stern@rowland.harvard.edu 2022-01-24T20:14:40+00:00 5b67b315037250a61861119683e7fcb509deea25 Two people have reported (and mentioned numerous other reports on the web) that VIA's VL817 USB-SATA bridge does not work with the uas driver. Typical log messages are: [ 3606.232149] sd 14:0:0:0: [sdg] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD [ 3606.232154] sd 14:0:0:0: [sdg] tag#2 CDB: Write(16) 8a 00 00 00 00 00 18 0c c9 80 00 00 00 80 00 00 [ 3606.306257] usb 4-4.4: reset SuperSpeed Plus Gen 2x1 USB device number 11 using xhci_hcd [ 3606.328584] scsi host14: uas_eh_device_reset_handler success Surprisingly, the devices do seem to work okay for some other people. The cause of the differing behaviors is not known. In the hope of getting the devices to work for the most users, even at the possible cost of degraded performance for some, this patch adds an unusual_devs entry for the VL817 to block it from binding to the uas driver by default. Users will be able to override this entry by means of a module parameter, if they want. CC: <stable@vger.kernel.org> Reported-by: DocMAX <mail@vacharakis.de> Reported-and-tested-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/Ye8IsK2sjlEv1rqU@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Two people have reported (and mentioned numerous other reports on the
web) that VIA's VL817 USB-SATA bridge does not work with the uas
driver.  Typical log messages are:

[ 3606.232149] sd 14:0:0:0: [sdg] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
[ 3606.232154] sd 14:0:0:0: [sdg] tag#2 CDB: Write(16) 8a 00 00 00 00 00 18 0c c9 80 00 00 00 80 00 00
[ 3606.306257] usb 4-4.4: reset SuperSpeed Plus Gen 2x1 USB device number 11 using xhci_hcd
[ 3606.328584] scsi host14: uas_eh_device_reset_handler success

Surprisingly, the devices do seem to work okay for some other people.
The cause of the differing behaviors is not known.

In the hope of getting the devices to work for the most users, even at
the possible cost of degraded performance for some, this patch adds an
unusual_devs entry for the VL817 to block it from binding to the uas
driver by default.  Users will be able to override this entry by means
of a module parameter, if they want.

CC: <stable@vger.kernel.org>
Reported-by: DocMAX <mail@vacharakis.de>
Reported-and-tested-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Ye8IsK2sjlEv1rqU@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2022-01-12T19:27:57+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-01-12T19:27:57+00:00 57ea81971b7296b42fc77424af44c5915d3d4ae2 Pull USB and Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 5.17-rc1. Nothing major in here, just lots of little updates and cleanups. These include: - some USB header fixes picked from Ingo's header-splitup work - more USB4/Thunderbolt hardware support added - USB gadget driver updates and additions - USB typec additions (includes some acpi changes, which were acked by the ACPI maintainer) - core USB fixes as found by syzbot that were too late for 5.16-final - USB dwc3 driver updates - USB dwc2 driver updates - platform_get_irq() conversions of some USB drivers - other minor USB driver updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (111 commits) docs: ABI: fixed formatting in configfs-usb-gadget-uac2 usb: gadget: u_audio: Subdevice 0 for capture ctls usb: gadget: u_audio: fix calculations for small bInterval usb: dwc2: gadget: initialize max_speed from params usb: dwc2: do not gate off the hardware if it does not support clock gating usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h> USB: common: debug: add needed kernel.h include headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.c headers/prep: Fix non-standard header section: drivers/usb/cdns3/core.h headers/prep: usb: gadget: Fix namespace collision USB: core: Fix bug in resuming hub's handling of wakeup requests USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status usb: dwc3: dwc3-qcom: Add missing platform_device_put() in dwc3_qcom_acpi_register_core usb: gadget: clear related members when goto fail usb: gadget: don't release an existing dev->buf usb: dwc2: Simplify a bitmap declaration usb: Remove usb_for_each_port() usb: typec: port-mapper: Convert to the component framework usb: Link the ports to the connectors they are attached to ... 
Pull USB and Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for
  5.17-rc1.

  Nothing major in here, just lots of little updates and cleanups. These
  include:

   - some USB header fixes picked from Ingo's header-splitup work

   - more USB4/Thunderbolt hardware support added

   - USB gadget driver updates and additions

   - USB typec additions (includes some acpi changes, which were acked
     by the ACPI maintainer)

   - core USB fixes as found by syzbot that were too late for 5.16-final

   - USB dwc3 driver updates

   - USB dwc2 driver updates

   - platform_get_irq() conversions of some USB drivers

   - other minor USB driver updates and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (111 commits)
  docs: ABI: fixed formatting in configfs-usb-gadget-uac2
  usb: gadget: u_audio: Subdevice 0 for capture ctls
  usb: gadget: u_audio: fix calculations for small bInterval
  usb: dwc2: gadget: initialize max_speed from params
  usb: dwc2: do not gate off the hardware if it does not support clock gating
  usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe
  headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h>
  USB: common: debug: add needed kernel.h include
  headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.c
  headers/prep: Fix non-standard header section: drivers/usb/cdns3/core.h
  headers/prep: usb: gadget: Fix namespace collision
  USB: core: Fix bug in resuming hub's handling of wakeup requests
  USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status
  usb: dwc3: dwc3-qcom: Add missing platform_device_put() in dwc3_qcom_acpi_register_core
  usb: gadget: clear related members when goto fail
  usb: gadget: don't release an existing dev->buf
  usb: dwc2: Simplify a bitmap declaration
  usb: Remove usb_for_each_port()
  usb: typec: port-mapper: Convert to the component framework
  usb: Link the ports to the connectors they are attached to
  ...
usb-storage: Remove redundant assignments 2021-12-30T11:10:17+00:00 luo penghao luo.penghao@zte.com.cn 2021-12-30T06:38:19+00:00 3254a73fb2caef71c5cf3bd7868f3d5d5a724932 The assignments in these two places will be overwritten, so they should be deleted. The clang_analyzer complains as follows: drivers/usb/storage/sierra_ms.c: Value stored to 'retries' is never read Value stored to 'result' is never read Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: luo penghao <luo.penghao@zte.com.cn> Link: https://lore.kernel.org/r/20211230063819.586428-1-luo.penghao@zte.com.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The assignments in these two places will be overwritten, so they
should be deleted.

The clang_analyzer complains as follows:

drivers/usb/storage/sierra_ms.c:

Value stored to 'retries' is never read
Value stored to 'result' is never read

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Link: https://lore.kernel.org/r/20211230063819.586428-1-luo.penghao@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
block: remove the ->rq_disk field in struct request 2021-11-29T13:41:29+00:00 Christoph Hellwig hch@lst.de 2021-11-26T12:18:00+00:00 f3fa33acca9f0058157214800f68b10d8e71ab7a Just use the disk attached to the request_queue instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20211126121802.2090656-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> 
Just use the disk attached to the request_queue instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211126121802.2090656-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi 2021-11-05T15:42:02+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-11-05T15:42:02+00:00 fe91c4725aeed35023ba4f7a1e1adfebb6878c23 Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, smartpqi, lpfc, target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug fixes. Notable core changes are the removal of scsi->tag which caused some churn in obsolete drivers and a sweep through all drivers to call scsi_done() directly instead of scsi->done() which removes a pointer indirection from the hot path and a move to register core sysfs files earlier, which means they're available to KOBJ_ADD processing, which necessitates switching all drivers to using attribute groups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: lpfc: Update lpfc version to 14.0.0.3 scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss scsi: lpfc: Fix link down processing to address NULL pointer dereference scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine scsi: lpfc: Correct sysfs reporting of loop support after SFP status change scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup() scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer scsi: ufs: mediatek: Avoid sched_clock() misuse scsi: mpt3sas: Make mpt3sas_dev_attrs static scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions scsi: target: core: Stop using bdevname() scsi: aha1542: Use memcpy_{from,to}_bvec() scsi: sr: Add error handling support for add_disk() scsi: sd: Add error handling support for add_disk() scsi: target: Perform ALUA group changes in one step scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path scsi: target: Fix alua_tg_pt_gps_count tracking scsi: target: Fix ordered tag handling ... 
Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, smartpqi, lpfc,
  target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
  fixes.

  Notable core changes are the removal of scsi->tag which caused some
  churn in obsolete drivers and a sweep through all drivers to call
  scsi_done() directly instead of scsi->done() which removes a pointer
  indirection from the hot path and a move to register core sysfs files
  earlier, which means they're available to KOBJ_ADD processing, which
  necessitates switching all drivers to using attribute groups"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
  scsi: lpfc: Update lpfc version to 14.0.0.3
  scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
  scsi: lpfc: Fix link down processing to address NULL pointer dereference
  scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
  scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
  scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
  scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
  scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
  scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
  scsi: ufs: mediatek: Avoid sched_clock() misuse
  scsi: mpt3sas: Make mpt3sas_dev_attrs static
  scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
  scsi: target: core: Stop using bdevname()
  scsi: aha1542: Use memcpy_{from,to}_bvec()
  scsi: sr: Add error handling support for add_disk()
  scsi: sd: Add error handling support for add_disk()
  scsi: target: Perform ALUA group changes in one step
  scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
  scsi: target: Fix alua_tg_pt_gps_count tracking
  scsi: target: Fix ordered tag handling
  ...
usb-storage: Add compatibility quirk flags for iODD 2531/2541 2021-10-18T15:05:34+00:00 James Buren braewoods+lkml@braewoods.net 2021-10-14T01:55:04+00:00 05c8f1b67e67dcd786ae3fe44492bbc617b4bd12 These drive enclosures have firmware bugs that make it impossible to mount a new virtual ISO image after Linux ejects the old one if the device is locked by Linux. Windows bypasses this problem by the fact that they do not lock the device. Add a quirk to disable device locking for these drive enclosures. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Buren <braewoods+lkml@braewoods.net> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211014015504.2695089-1-braewoods+lkml@braewoods.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
These drive enclosures have firmware bugs that make it impossible to mount
a new virtual ISO image after Linux ejects the old one if the device is
locked by Linux. Windows bypasses this problem by the fact that they do
not lock the device. Add a quirk to disable device locking for these
drive enclosures.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Buren <braewoods+lkml@braewoods.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211014015504.2695089-1-braewoods+lkml@braewoods.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi: usb: Switch to attribute groups 2021-10-17T01:45:59+00:00 Bart Van Assche bvanassche@acm.org 2021-10-12T23:35:57+00:00 01e570febaaafd74d6625476e2665238c5e47e1e struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-46-bvanassche@acm.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.

Link: https://lore.kernel.org/r/20211012233558.4066756-46-bvanassche@acm.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: core: Remove the 'done' argument from SCSI queuecommand_lck functions 2021-10-17T01:32:16+00:00 Bart Van Assche bvanassche@acm.org 2021-10-07T20:46:14+00:00 af049dfd0b105bab32170d1c68826a4cd8424efd The DEF_SCSI_QCMD() macro passes the addresses of the SCSI host lock and also that of the scsi_done function to the queuecommand_lck() function implementations. Remove the 'scsi_done' argument since its address is now a constant and instead call 'scsi_done' directly from inside the queuecommand_lck() functions. Link: https://lore.kernel.org/r/20211007204618.2196847-14-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
The DEF_SCSI_QCMD() macro passes the addresses of the SCSI host lock and
also that of the scsi_done function to the queuecommand_lck() function
implementations. Remove the 'scsi_done' argument since its address is
now a constant and instead call 'scsi_done' directly from inside the
queuecommand_lck() functions.

Link: https://lore.kernel.org/r/20211007204618.2196847-14-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: usb: Call scsi_done() directly 2021-10-17T01:31:43+00:00 Bart Van Assche bvanassche@acm.org 2021-10-07T20:46:10+00:00 46c97948e9b5bc8b67fd72741a2fe723ac1d14d7 Conditional statements are faster than indirect calls. Hence call scsi_done() directly. Link: https://lore.kernel.org/r/20211007204618.2196847-10-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
Conditional statements are faster than indirect calls. Hence call
scsi_done() directly.

Link: https://lore.kernel.org/r/20211007204618.2196847-10-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c 2021-09-21T14:37:52+00:00 Ondrej Zary linux@zary.sk 2021-09-13T21:01:06+00:00 b55d37ef6b7db3eda9b4495a8d9b0a944ee8c67d ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has broken tag handling, preventing the device from working at all: usb 1-1: new full-speed USB device number 2 using uhci_hcd usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60 usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0 usb 1-1: Product: USB Device usb 1-1: Manufacturer: USB Device usb-storage 1-1:1.0: USB Mass Storage device detected scsi host2: usb-storage 1-1:1.0 usbcore: registered new interface driver usb-storage usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address. 2.6c is the only firmware that claims Linux compatibility. The firmware can be upgraded using ezotgdbg utility: https://github.com/asciilifeform/ezotgdbg Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ondrej Zary <linux@zary.sk> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210913210106.12717-1-linux@zary.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has
broken tag handling, preventing the device from working at all:
usb 1-1: new full-speed USB device number 2 using uhci_hcd
usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60
usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0
usb 1-1: Product: USB Device
usb 1-1: Manufacturer: USB Device
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd

Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address.

2.6c is the only firmware that claims Linux compatibility.
The firmware can be upgraded using ezotgdbg utility:
https://github.com/asciilifeform/ezotgdbg

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210913210106.12717-1-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>