linux.git/drivers/usb/storage, branch v4.14 Linux kernel source tree License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02T10:10:55+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2017-11-01T14:07:57+00:00 b24413180f5600bcb3bb70fbed5cf186b60864bd Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: uas: fix bug in handling of alternate settings 2017-09-22T16:29:00+00:00 Alan Stern stern@rowland.harvard.edu 2017-09-22T15:56:49+00:00 786de92b3cb26012d3d0f00ee37adf14527f35c4 The uas driver has a subtle bug in the way it handles alternate settings. The uas_find_uas_alt_setting() routine returns an altsetting value (the bAlternateSetting number in the descriptor), but uas_use_uas_driver() then treats that value as an index to the intf->altsetting array, which it isn't. Normally this doesn't cause any problems because the various alternate settings have bAlternateSetting values 0, 1, 2, ..., so the value is equal to the index in the array. But this is not guaranteed, and Andrey Konovalov used the syzkaller fuzzer with KASAN to get a slab-out-of-bounds error by violating this assumption. This patch fixes the bug by making uas_find_uas_alt_setting() return a pointer to the altsetting entry rather than either the value or the index. Pointers are less subject to misinterpretation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> CC: Oliver Neukum <oneukum@suse.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The uas driver has a subtle bug in the way it handles alternate
settings.  The uas_find_uas_alt_setting() routine returns an
altsetting value (the bAlternateSetting number in the descriptor), but
uas_use_uas_driver() then treats that value as an index to the
intf->altsetting array, which it isn't.

Normally this doesn't cause any problems because the various
alternate settings have bAlternateSetting values 0, 1, 2, ..., so the
value is equal to the index in the array.  But this is not guaranteed,
and Andrey Konovalov used the syzkaller fuzzer with KASAN to get a
slab-out-of-bounds error by violating this assumption.

This patch fixes the bug by making uas_find_uas_alt_setting() return a
pointer to the altsetting entry rather than either the value or the
index.  Pointers are less subject to misinterpretation.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
CC: Oliver Neukum <oneukum@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb-storage: unusual_devs entry to fix write-access regression for Seagate external drives 2017-09-22T08:08:50+00:00 Alan Stern stern@rowland.harvard.edu 2017-09-21T19:59:30+00:00 113f6eb6d50cfa5e2a1cdcf1678b12661fa272ab Kris Lindgren reports that without the NO_WP_DETECT flag, his Seagate external disk drive fails all write accesses. This regresssion dates back approximately to the start of the 4.x kernel releases. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Kris Lindgren <kris.lindgren@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Kris Lindgren reports that without the NO_WP_DETECT flag, his Seagate
external disk drive fails all write accesses.  This regresssion dates
back approximately to the start of the 4.x kernel releases.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Kris Lindgren <kris.lindgren@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb-storage: fix bogus hardware error messages for ATA pass-thru devices 2017-09-22T08:08:50+00:00 Alan Stern stern@rowland.harvard.edu 2017-09-21T20:02:05+00:00 a4fd4a724d6c30ad671046d83be2e9be2f11d275 Ever since commit a621bac3044e ("scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands"), people have been getting bogus error messages for USB disk drives using ATA pass-thru. For example: [ 1344.880193] sd 6:0:0:0: [sdb] Attached SCSI disk [ 1345.069152] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [ 1345.069159] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] [ 1345.069162] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information [ 1345.069168] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00 [ 1345.172252] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [ 1345.172258] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] [ 1345.172261] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information [ 1345.172266] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00 These messages can be quite annoying, because programs like udisks2 provoke them every 10 minutes or so. Other programs can also have this effect, such as those in smartmontools. I don't fully understand how that commit induced the SCSI core to log these error messages, but the underlying cause for them is code added to usb-storage by commit f1a0743bc0e7 ("USB: storage: When a device returns no sense data, call it a Hardware Error"). At the time it was necessary to do this, in order to prevent an infinite retry loop with some not-so-great mass storage devices. However, the ATA pass-thru protocol uses SCSI sense data to return command status values, and some devices always report Check Condition status for ATA pass-thru commands to ensure that the host retrieves the sense data, even if the command succeeded. This violates the USB mass-storage protocol (Check Condition status is supposed to mean the command failed), but we can't help that. This patch attempts to mitigate the problem of these bogus error reports by changing usb-storage. The HARDWARE ERROR sense key will be inserted only for commands that aren't ATA pass-thru. Thanks to Ewan Milne for pointing out that this mechanism was present in usb-storage. 8 years after writing it, I had completely forgotten its existence. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Kris Lindgren <kris.lindgren@gmail.com> Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1351305 CC: Ewan D. Milne <emilne@redhat.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Ever since commit a621bac3044e ("scsi_lib: correctly retry failed zero
length REQ_TYPE_FS commands"), people have been getting bogus error
messages for USB disk drives using ATA pass-thru.  For example:

[ 1344.880193] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 1345.069152] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 1345.069159] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor]
[ 1345.069162] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[ 1345.069168] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 1345.172252] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 1345.172258] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor]
[ 1345.172261] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[ 1345.172266] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00

These messages can be quite annoying, because programs like udisks2
provoke them every 10 minutes or so.  Other programs can also have
this effect, such as those in smartmontools.

I don't fully understand how that commit induced the SCSI core to log
these error messages, but the underlying cause for them is code added
to usb-storage by commit f1a0743bc0e7 ("USB: storage: When a device
returns no sense data, call it a Hardware Error").  At the time it was
necessary to do this, in order to prevent an infinite retry loop with
some not-so-great mass storage devices.

However, the ATA pass-thru protocol uses SCSI sense data to return
command status values, and some devices always report Check Condition
status for ATA pass-thru commands to ensure that the host retrieves
the sense data, even if the command succeeded.  This violates the USB
mass-storage protocol (Check Condition status is supposed to mean the
command failed), but we can't help that.

This patch attempts to mitigate the problem of these bogus error
reports by changing usb-storage.  The HARDWARE ERROR sense key will be
inserted only for commands that aren't ATA pass-thru.

Thanks to Ewan Milne for pointing out that this mechanism was present
in usb-storage.  8 years after writing it, I had completely forgotten
its existence.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Kris Lindgren <kris.lindgren@gmail.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1351305
CC: Ewan D. Milne <emilne@redhat.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi 2017-09-08T04:11:05+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-09-08T04:11:05+00:00 572c01ba19ef150e98aea0b45ca17d43356521b5 Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, zfcp and a host of minor updates. The major driver change here is the elimination of the block based cciss driver in favour of the SCSI based hpsa driver (which now drives all the legacy cases cciss used to be required for). Plus a reset handler clean up and the redo of the SAS SMP handler to use bsg lib" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: scsi-mq: Always unprepare before requeuing a request scsi: Show .retries and .jiffies_at_alloc in debugfs scsi: Improve requeuing behavior scsi: Call scsi_initialize_rq() for filesystem requests scsi: qla2xxx: Reset the logo flag, after target re-login. scsi: qla2xxx: Fix slow mem alloc behind lock scsi: qla2xxx: Clear fc4f_nvme flag scsi: qla2xxx: add missing includes for qla_isr scsi: qla2xxx: Fix an integer overflow in sysfs code scsi: aacraid: report -ENOMEM to upper layer from aac_convert_sgraw2() scsi: aacraid: get rid of one level of indentation scsi: aacraid: fix indentation errors scsi: storvsc: fix memory leak on ring buffer busy scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough scsi: smartpqi: remove the smp_handler stub scsi: hpsa: remove the smp_handler stub scsi: bsg-lib: pass the release callback through bsg_setup_queue scsi: Rework handling of scsi_device.vpd_pg8[03] scsi: Rework the code for caching Vital Product Data (VPD) scsi: rcu: Introduce rcu_swap_protected() ... 
Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
  megaraid_sas, zfcp and a host of minor updates.

  The major driver change here is the elimination of the block based
  cciss driver in favour of the SCSI based hpsa driver (which now drives
  all the legacy cases cciss used to be required for). Plus a reset
  handler clean up and the redo of the SAS SMP handler to use bsg lib"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
  scsi: scsi-mq: Always unprepare before requeuing a request
  scsi: Show .retries and .jiffies_at_alloc in debugfs
  scsi: Improve requeuing behavior
  scsi: Call scsi_initialize_rq() for filesystem requests
  scsi: qla2xxx: Reset the logo flag, after target re-login.
  scsi: qla2xxx: Fix slow mem alloc behind lock
  scsi: qla2xxx: Clear fc4f_nvme flag
  scsi: qla2xxx: add missing includes for qla_isr
  scsi: qla2xxx: Fix an integer overflow in sysfs code
  scsi: aacraid: report -ENOMEM to upper layer from aac_convert_sgraw2()
  scsi: aacraid: get rid of one level of indentation
  scsi: aacraid: fix indentation errors
  scsi: storvsc: fix memory leak on ring buffer busy
  scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough
  scsi: smartpqi: remove the smp_handler stub
  scsi: hpsa: remove the smp_handler stub
  scsi: bsg-lib: pass the release callback through bsg_setup_queue
  scsi: Rework handling of scsi_device.vpd_pg8[03]
  scsi: Rework the code for caching Vital Product Data (VPD)
  scsi: rcu: Introduce rcu_swap_protected()
  ...
scsi: uas: move eh_bus_reset_handler to eh_device_reset_handler 2017-08-25T21:21:10+00:00 Hannes Reinecke hare@suse.de 2017-08-25T11:57:01+00:00 e13849b72a0b691d431c9b9964bfe785e3301219 The bus_reset handler is really a device reset, so move it to eh_device_reset_handler(). Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
The bus_reset handler is really a device reset, so move it to
eh_device_reset_handler().

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge 4.13-rc5 into usb-next 2017-08-14T21:50:58+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2017-08-14T21:50:58+00:00 feea468014f0c2f930b149e83a9047da86b26e4e This gets the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This gets the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb-storage: fix deadlock involving host lock and scsi_done 2017-07-30T14:18:27+00:00 Alan Stern stern@rowland.harvard.edu 2017-07-26T15:49:19+00:00 8b52291a0743fc4db4a7495c846a6f31ee84d282 Christoph Hellwig says that since version 4.12, the kernel switched to using blk-mq by default. The old code used a softirq for handling request completions, but blk-mq can handle completions in the caller's context. This may cause a problem for usb-storage, because it invokes the ->scsi_done callback while holding the host lock, and the completion routine sometimes tries to acquire the same lock (when running the error handler, for example). The consequence is that the existing code will sometimes deadlock upon error completion of a SCSI command (with a lockdep warning). This is easy enough to fix, since usb-storage doesn't really need to hold the host lock while the callback runs. It was simpler to write it that way, but moving the call outside the locked region is pretty easy and there's no downside. That's what this patch does. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net> CC: Christoph Hellwig <hch@lst.de> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Christoph Hellwig says that since version 4.12, the kernel switched to
using blk-mq by default.  The old code used a softirq for handling
request completions, but blk-mq can handle completions in the caller's
context.  This may cause a problem for usb-storage, because it invokes
the ->scsi_done callback while holding the host lock, and the
completion routine sometimes tries to acquire the same lock (when
running the error handler, for example).

The consequence is that the existing code will sometimes deadlock upon
error completion of a SCSI command (with a lockdep warning).

This is easy enough to fix, since usb-storage doesn't really need to
hold the host lock while the callback runs.  It was simpler to write
it that way, but moving the call outside the locked region is pretty
easy and there's no downside.  That's what this patch does.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
CC: Christoph Hellwig <hch@lst.de>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069 2017-07-30T14:18:27+00:00 Alan Swanson reiver@improbability.net 2017-07-26T11:03:33+00:00 89f23d51defcb94a5026d4b5da13faf4e1150a6f Similar to commit d595259fbb7a ("usb-storage: Add ignore-residue quirk for Initio INIC-3619") for INIC-3169 in unusual_devs.h but INIC-3069 already present in unusual_uas.h. Both in same controller IC family. Issue is that MakeMKV fails during key exchange with installed bluray drive with following error: 002004:0000 Error 'Scsi error - ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED' occurred while issuing SCSI command AD010..080002400 to device 'SG:dev_11:0' Signed-off-by: Alan Swanson <reiver@improbability.net> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Similar to commit d595259fbb7a ("usb-storage: Add ignore-residue quirk for
Initio INIC-3619") for INIC-3169 in unusual_devs.h but INIC-3069 already
present in unusual_uas.h. Both in same controller IC family.

Issue is that MakeMKV fails during key exchange with installed bluray drive
with following error:

002004:0000 Error 'Scsi error - ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED'
occurred while issuing SCSI command AD010..080002400 to device 'SG:dev_11:0'

Signed-off-by: Alan Swanson <reiver@improbability.net>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge 4.13-rc2 into usb-next 2017-07-24T02:55:51+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2017-07-24T02:55:51+00:00 141769851cb73e8f986e9ed83129cde3b645288d We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>