This reverts commit 8dfe4b14869fd185ca25ee88b02ada58a3005eaf. There are a number of issues still remaining in usb-storage autosuspend, so, to be safe, we need to revert this for now. Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The MP3/MP4/AVI player "Rockchip ROCK MP3" is seen as a USB disk, but fails if more than 128 sectors (64kB) are sent or requested in a single read or write command, and disconnects from the USB bus. Typical kernel log showing the problem is: usb 3-1: reset high speed USB device using ehci_hcd and address 6 usb 3-1: reset high speed USB device using ehci_hcd and address 6 sd 14:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00 end_request: I/O error, dev sdb, sector 32 sd 14:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00 end_request: I/O error, dev sdb, sector 32 usb 3-1: USB disconnect, address 6 This patch works around the device limitation by adding "Rockchip ROCK MP3" to unusual USB devices list and limiting data transfers to 64 sectors (32kB) per command. Tested on 2.6.23-rc5 (amd64). Signed-off-by: Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The D40 needs the same quirks as the other (semi-)professional Nikon cameras. The patch is against 2.6.23-rc5. Details: http://bugs.gentoo.org/show_bug.cgi?id=191431 From: Ortwin Glück <odi@odi.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Upgrade the unusual_devs.h file to support the new 1.01 firmware for the Nikon D80. Signed-off-by: Mike Pagano <mpagano-kernel@mpagano.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch (as961) fixes a couple of bugs in the disconnect pathway of usb-storage. The first problem, which apparently has been around for a while although nobody noticed it, shows up when an aborted command is still pending when a disconnect occurs. The SCSI error-handler will continue to wait in command_abort() until the us->notify completion is signalled. Thus quiesce_and_remove_host() needs to signal it. The second problem was introduced recently along with autosuspend support. Since usb_stor_scan_thread() now calls usb_autopm_put_interface() before exiting, we can't simply leave the scanning thread running after a disconnect; we must wait until the thread exits. This is solved by adding a new struct completion to the private data structure. Fortuitously, it allows the removal of the rather clunky mechanism used in the past to insure that all threads have finished before the module is unloaded. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This short patch allows NIKON D50 to be mounted as UMS[unusual device]
on Linux niam 2.6.22-rc7-cfs-v18 #2 PREEMPT Tue Jul 3 22:35:53 EEST
2007 i686 Intel(R) Celeron(R) M processor 1.50GHz GenuineIntel
GNU/Linux,
some previous kernels...
lsusb -v
Bus 001 Device 006: ID 04b0:0409 Nikon Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x04b0 Nikon Corp.
idProduct 0x0409
bcdDevice 1.00
iManufacturer 1 NIKON
iProduct 2 NIKON DSC D50
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Signed-off-by: Milinevsky Dmitry <niam.niam@gmail.com>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: <caglar@pardus.org.tr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Blackberry Pearl can run in two modes; a usb-storage only mode and a mode that allows access via mass storage and to its database. The berry_charge module will set the device to dual mode and thus we should ignore its native mode if that module is built Signed-off-by: Jeremy Katz <katzj@redhat.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Following trivial patch converts smarttabs/whitespaces into real tabs. Signed-off-by: S.Caglar Onur <caglar@pardus.org.tr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>