Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.
Included in here are:
- Lots of USB4/Thunderbolt additions and updates for new hardware
types and fixes as people are starting to get access to the
hardware in the wild
- new gadget controller driver, cdns2, added
- new typec drivers added
- xhci driver updates
- typec driver updates
- usbip driver fixes
- usb-serial driver updates and fixes
- lots of smaller USB driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC
usb: host: xhci: Do not re-initialize the XHCI HC if being removed
usb: typec: nb7vpq904m: fix CONFIG_DRM dependency
usbip: usbip_host: Replace strlcpy with strscpy
usb: dwc3: gadget: Propagate core init errors to UDC during pullup
USB: serial: option: add LARA-R6 01B PIDs
usb: ulpi: Make container_of() no-op in to_ulpi_dev()
usb: gadget: legacy: fix error return code in gfs_bind
usb: typec: fsa4480: add support for Audio Accessory Mode
usb: typec: fsa4480: rework mux & switch setup to handle more states
usb: typec: ucsi: call typec_set_mode on non-altmode partner change
USB: gadget: f_hid: make hidg_class a static const structure
USB: gadget: f_printer: make usb_gadget_class a static const structure
USB: mon: make mon_bin_class a static const structure
USB: gadget: udc: core: make udc_class a static const structure
USB: roles: make role_class a static const structure
dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt
dt-bindings: usb: Add StarFive JH7110 USB controller
dt-bindings: usb: dwc3: Add IPQ9574 compatible
usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"
...
The new LARA-R6 product variant identified by the "01B" string can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial interface and 1 CDC-ECM virtual network interface The first 4 interfaces of all the 3 USB configurations (default, RmNet, CDC-ECM) are the same. In default mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions In RmNet mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions If 4: RMNET interface In CDC-ECM mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions If 4: CDC-ECM interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Link: https://lore.kernel.org/r/20230622092921.12651-1-davide.tronchin.94@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
Instead of returning success when a driver does not support break signalling, return an error to let user space know and to avoid waiting when break is not supported. Tested-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Johan Hovold <johan@kernel.org>
Only the first UART interface (ECI) on CP2105 supports break signalling. Return an error on requests for break state changes for the second interface (SCI) to avoid transmitting a garbage character and waiting when break is not supported. Tested-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Johan Hovold <johan@kernel.org>
Start propagating errors to user space when setting the break state fails. This will be used by follow-on changes to also report when a driver or device does not support break control. Tested-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Johan Hovold <johan@kernel.org>
Add support for Quectel EM061KGL series which are based on Qualcomm SDX12 chip: EM061KGL_LTA(0x2c7c / 0x0123): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL EM061KGL_LMS(0x2c7c / 0x0124): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL EM061KGL_LWW(0x2c7c / 0x6008): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL EM061KGL_LCN(0x2c7c / 0x6009): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL Above products use the exact same interface layout and option driver is for interfaces DIAG, NMEA and AT. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6008 Rev= 5.04 S: Manufacturer=Quectel S: Product=Quectel EM061K-GL S: SerialNumber=f6fa08b6 C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jerry Meng <jerry-meng@foxmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...
Johan writes: USB-serial updates for 6.4-rc1 Here are the USB-serial updates for 6.4-rc1; a new modem device id and an unused-function cleanup. All have been in linux-next with no reported issues. * tag 'usb-serial-6.4-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add UNISOC vendor and TOZED LT70C product USB: serial: quatech2: remove unused qt2_setdevice function
Add UNISOC vendor ID and TOZED LT70-C modem which is based from UNISOC SL8563. The modem supports the NCM mode. Interface 0 is used for running the AT commands. Interface 12 is the ADB interface. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4055 Rev=04.04 S: Manufacturer=Unisoc Phone S: Product=Unisoc Phone S: SerialNumber=<redacted> C: #Ifs=14 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=10 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=11 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=12 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=13 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=88(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 7 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230417152003.243248-1-arinc.unal@arinc9.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
We need the USB fixes in here for testing, and this resolves two merge conflicts, one pointed out by linux-next: drivers/usb/dwc3/dwc3-pci.c drivers/usb/host/xhci-pci.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>