linux.git/drivers/usb/serial, branch v4.6-rc2

Merge tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2016-03-17T21:24:26+00:00

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.6-rc1.

  The normal mess is here, gadget and xhci fixes and updates, and lots
  of other driver updates and cleanups as well.  Full details are in the
  shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (266 commits)
  USB: core: let USB device know device node
  usb: devio: Add ioctl to disallow detaching kernel USB drivers.
  usb: gadget: f_acm: Fix configfs attr name
  usb: udc: lpc32xx: remove USB PLL and USB OTG clock management
  usb: udc: lpc32xx: remove direct access to clock controller registers
  usb: udc: lpc32xx: switch to clock prepare/unprepare model
  usb: renesas_usbhs: gadget: fix giveback status code in usbhsg_pipe_disable()
  usb: gadget: renesas_usb3: Use ARCH_RENESAS
  usb: dwc2: Fix issues in dwc2_complete_non_isoc_xfer_ddma()
  usb: dwc2: Add support for Lantiq ARX and XRX SoCs
  usb: phy: generic: Handle late registration of gadget
  usb: gadget: bdc_udc: fix race condition in bdc_udc_exit()
  usb: musb: core: added missing const qualifier to musb_hdrc_platform_data::config
  usb: dwc2: Move host-specific core functions into hcd.c
  usb: dwc2: Move register save and restore functions
  usb: dwc2: Use kmem_cache_free()
  usb: dwc2: host: If using uframe scheduler, end splits better
  usb: dwc2: host: Totally redo the microframe scheduler
  usb: dwc2: host: Properly set even/odd frame
  usb: dwc2: host: Add dwc2_hcd_get_future_frame_number() call
  ...

Merge tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2016-03-17T20:53:25+00:00

Pull tty/serial updates from Greg KH:
 "Here's the big tty/serial driver pull request for 4.6-rc1.

  Lots of changes in here, Peter has been on a tear again, with lots of
  refactoring and bugs fixes, many thanks to the great work he has been
  doing.  Lots of driver updates and fixes as well, full details in the
  shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits)
  serial: 8250: describe CONFIG_SERIAL_8250_RSA
  serial: samsung: optimize UART rx fifo access routine
  serial: pl011: add mark/space parity support
  serial: sa1100: make sa1100_register_uart_fns a function
  tty: serial: 8250: add MOXA Smartio MUE boards support
  serial: 8250: convert drivers to use up_to_u8250p()
  serial: 8250/mediatek: fix building with SERIAL_8250=m
  serial: 8250/ingenic: fix building with SERIAL_8250=m
  serial: 8250/uniphier: fix modular build
  Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular"
  Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular"
  serial: mvebu-uart: initial support for Armada-3700 serial port
  serial: mctrl_gpio: Add missing module license
  serial: ifx6x60: avoid uninitialized variable use
  tty/serial: at91: fix bad offset for UART timeout register
  tty/serial: at91: restore dynamic driver binding
  serial: 8250: Add hardware dependency to RT288X option
  TTY, devpts: document pty count limiting
  tty: goldfish: support platform_device with id -1
  drivers: tty: goldfish: Add device tree bindings
  ...

Merge tag 'usb-serial-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

2016-03-09T04:28:19+00:00

Johan writes:

USB-serial updates for v4.6-rc1

Here are some cp210x register-accessor updates and general usb-serial
code clean ups.

Signed-off-by: Johan Hovold

USB: qcserial: add Sierra Wireless EM74xx device ID

2016-03-02T08:35:32+00:00

The MC74xx and EM74xx modules use different IDs by default, according
to the Lenovo EM7455 driver for Windows.

Cc: 
Signed-off-by: Bjørn Mork 
Signed-off-by: Johan Hovold

Revert "USB: serial: add Moxa UPORT 11x0 driver"

2016-03-01T10:01:33+00:00

This reverts commit 0b2b093ad405b56a9e6f4f20a25da77ebfa9549c.

Turns out the MOXA vendor driver was basically just a copy of the
ti_usb_3410_5052 driver. We don't want two drivers for the same chip
even if mxu11x0 had gotten some much needed clean up before merge. So
let's remove the mxu11x0 driver, add support for these Moxa devices to
the TI driver, and then clean that driver up instead.

Signed-off-by: Johan Hovold 
Acked-by: Greg Kroah-Hartman

USB: serial: option: add support for Quectel UC20

2016-03-01T10:01:33+00:00

Add support for Quectel UC20 and blacklist the QMI interface.

Signed-off-by: Yegor Yefremov 
Cc: stable 
[johan: amend commit message ]
Signed-off-by: Johan Hovold

USB: serial: option: add support for Telit LE922 PID 0x1045

2016-03-01T10:01:33+00:00

This patch adds support for 0x1045 PID of Telit LE922.

Signed-off-by: Daniele Palmas 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: cp210x: add new access functions for large registers

2016-02-29T18:04:49+00:00

cp210x_get_config and cp210x_set_config are cumbersome to use. This change
switches large register access to use new block functions. The old
functions are removed because now they become unused.

Signed-off-by: Konstantin Shkolnyy 
[johan: minor style change ]
Signed-off-by: Johan Hovold

USB: serial: cp210x: add 8-bit and 32-bit register access functions

2016-02-29T18:04:49+00:00

cp210x_get_config and cp210x_set_config are cumbersome to use. This change
introduces new register access functions for 8 and 32-bit values, instead
of the above functions.

Signed-off-by: Konstantin Shkolnyy 
Signed-off-by: Johan Hovold

USB: serial: cp210x: add 16-bit register access functions

2016-02-29T18:04:49+00:00

cp210x_get_config and cp210x_set_config are cumbersome to use. This change
introduces new register access functions for 16-bit values, instead of
the above functions.

Signed-off-by: Konstantin Shkolnyy 
Signed-off-by: Johan Hovold