linux.git/drivers/usb/serial, branch v3.1-rc1

atomic: use

2011-07-26T23:49:47+00:00

This allows us to move duplicated code in 
(atomic_inc_not_zero() for now) to 

Signed-off-by: Arun Sharma 
Reviewed-by: Eric Dumazet 
Cc: Ingo Molnar 
Cc: David Miller 
Cc: Eric Dumazet 
Acked-by: Mike Frysinger 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

2011-07-26T06:08:32+00:00

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (115 commits)
  EHCI: fix direction handling for interrupt data toggles
  USB: serial: add IDs for WinChipHead USB->RS232 adapter
  USB: OHCI: fix another regression for NVIDIA controllers
  usb: gadget: m66592-udc: add pullup function
  usb: gadget: m66592-udc: add function for external controller
  usb: gadget: r8a66597-udc: add pullup function
  usb: renesas_usbhs: support multi driver
  usb: renesas_usbhs: inaccessible pipe is not an error
  usb: renesas_usbhs: care buff alignment when dma handler
  USB: PL2303: correctly handle baudrates above 115200
  usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift
  usb: renesas_usbhs: compile/config are rescued
  usb: renesas_usbhs: fixup comment-out
  usb: update email address in ohci-sh and r8a66597-hcd
  usb: r8a66597-hcd: add function for external controller
  EHCI: only power off port if over-current is active
  USB: mon: Allow to use usbmon without debugfs
  USB: EHCI: go back to using the system clock for QH unlinks
  ehci: add pci quirk for Ordissimo and RM Slate 100 too
  ehci: refactor pci quirk to use standard dmi_check_system method
  ...

Fix up trivial conflicts in Documentation/feature-removal-schedule.txt

USB: serial: add IDs for WinChipHead USB->RS232 adapter

2011-07-19T11:48:45+00:00

Add ID 4348:5523 for WinChipHead USB->RS 232 adapter with
Prolifec PL2303 chipset

Signed-off-by: Wolfgang Denk 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

USB: PL2303: correctly handle baudrates above 115200

2011-07-08T21:58:27+00:00

PL2303: correctly handle baudrates above 115200

Signed-off-by: Michal Sroczynski 
Signed-off-by: Greg Kroah-Hartman

USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c

2011-06-27T20:46:44+00:00

appended patch adds support for the new FTDI FT232H chip. This chip is a
single channel version of the dual FT2232H/quad FT4232H, coming with it's
own default PID 0x6014 (FT2232H uses the same PID 0x6010 like FT2232C,
FT4232H has also it's own PID).

The patch was checked on an UM232H module and a terminal program with TX/RX
shorted to that typing in the terminal reproduced the characters.

Signed-off-by: Uwe Bonnes 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

USB: TI 3410/5052 USB Serial Driver: Fix mem leak when firmware is too big.

2011-06-14T21:20:30+00:00

If the size of the firmware exceeds TI_FIRMWARE_BUF_SIZE we'll leak 'fw_p'
by failing to call release_firmware().
This patch fixes the leak.

Signed-off-by: Jesper Juhl 
Signed-off-by: Greg Kroah-Hartman

USB: serial: add another 4N-GALAXY.DE PID to ftdi_sio driver

2011-06-08T20:48:30+00:00

E.g. newer CAN 2.0 A/B <=> USB 2.0 converters report idProduct=f3c2.

Signed-off-by: Steffen Sledz 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

Revert "USB: option: add ID for ZTE MF 330"

2011-06-07T22:03:37+00:00

This reverts commit a559d2c8c1bf652ea2d0ecd6ab4a250fcdb37db8.

Turns out that device id 0x1d6b:0x0002 is a USB hub, which causes havoc
when the option driver tries to bind to it.

So revert this as it doesn't seem to be needed at all.

Thanks to Michael Tokarev and Paweł Drobek for working on resolving this
issue.

Cc: Paweł Drobek 
Cc: Michael Tokarev 
Cc: Dominik Brodowski 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

USB: option Add blacklist for ZTE K3765-Z (19d2:2002)

2011-06-06T22:58:57+00:00

The funtion option_send_status times out when sending USB messages
to the interfaces 0, 1, and 2 of this UMTS stick. This results in a
5s timeout in the function causing other tty operations to feel very
sluggish.

This patch adds a blacklist entry for these 3 interfaces on the ZTE
K3765-Z device.

I was also able to reproduce the problem with v2.6.38 and v2.6.39.

This is very similar to a problem fixed in

commit 7a89e4cb9cdaba92f5fbc509945cf4e3c48db4e2
Author: Herton Ronaldo Krzesinski 
Date:   Wed Mar 9 09:19:48 2011 +0000

    USB: serial: option: Apply OPTION_BLACKLIST_SENDSETUP also for ZTE MF626

Signed-off-by: Torsten Hilbrich 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

option: add Prolink PH300 modem IDs

2011-06-06T22:58:15+00:00

Simple ID addition.

Signed-off-by: Dan Williams 
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman