linux.git/drivers/usb/serial/option.c, branch v4.12

usb: serial: option: add Telit ME910 support

2017-05-15T08:02:26+00:00

This patch adds support for Telit ME910 PID 0x1100.

Signed-off-by: Daniele Palmas 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems

2017-03-14T09:42:51+00:00

Add Quectel UC15, UC20, EC21, and EC25.  The EC20 is handled by
qcserial due to a USB VID/PID conflict with an existing Acer
device.

Signed-off-by: Dan Williams 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: option: add device ID for HP lt2523 (Novatel E371)

2017-01-24T11:07:28+00:00

Yet another laptop vendor rebranded Novatel E371.

Cc: stable@vger.kernel.org
Signed-off-by: Bjørn Mork 
Signed-off-by: Johan Hovold

USB: serial: option: add dlink dwm-158

2016-12-09T10:44:11+00:00

Adding registration for 3G modem DWM-158 in usb-serial-option

Signed-off-by: Giuseppe Lippolis 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041

2016-12-09T10:44:11+00:00

This patch adds support for PIDs 0x1040, 0x1041 of Telit LE922A.

Since the interface positions are the same than the ones used
for other Telit compositions, previous defined blacklists are used.

Signed-off-by: Daniele Palmas 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add WeTelecom 0x6802 and 0x6803 products

2016-08-24T12:13:40+00:00

These product IDs are listed in Windows driver.
0x6803 corresponds to WeTelecom WM-D300.
0x6802 name is unknown.

Signed-off-by: Aleksandr Makarov 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: option: add WeTelecom WM-D200

2016-08-20T13:32:14+00:00

Add support for WeTelecom WM-D200.

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22de ProdID=6801 Rev=00.00
S:  Manufacturer=WeTelecom Incorporated
S:  Product=WeTelecom Mobile Products
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Signed-off-by: Aleksandr Makarov 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: option: add support for Telit LE920A4

2016-08-08T10:36:27+00:00

This patch adds a set of compositions for Telit LE920A4.

Compositions in short are:

0x1207: tty + tty
0x1208: tty + adb + tty + tty
0x1211: tty + adb + ecm
0x1212: tty + adb
0x1213: ecm + tty
0x1214: tty + adb + ecm + tty

telit_le922_blacklist_usbcfg3 is reused for compositions 0x1211
and 0x1214 due to the same interfaces positions.

Signed-off-by: Daniele Palmas 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: option: add D-Link DWM-156/A3

2016-08-08T09:54:44+00:00

The device has four interfaces; the three serial ports ought to be
handled by this driver:

00 Diagnostic interface serial port
01 NMEA device serial port
02 Mass storage (sd card)
03 Modem serial port

The other product ids listed in the Windows driver are present already.

Signed-off-by: Lubomir Rintel 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: option: add support for Telit LE910 PID 0x1206

2016-07-16T10:45:26+00:00

This patch adds support for 0x1206 PID of Telit LE910.

Since the interfaces positions are the same than the ones for
0x1043 PID of Telit LE922, telit_le922_blacklist_usbcfg3 is used.

Signed-off-by: Daniele Palmas 
Cc: stable 
Signed-off-by: Johan Hovold