linux.git/drivers/usb/serial/option.c, branch v3.10

USB: option,zte_ev: move most ZTE CDMA devices to zte_ev

2013-06-06T16:06:25+00:00

Per some ZTE Linux drivers I found for the AC2716, the following patch
moves most ZTE CDMA devices from option to zte_ev.  The blacklist stuff
that option does is not required with zte_ev, because it doesn't
implement any of the send_setup hooks which the blacklist suppressed.

I did not move the 2718 over because I could not find any ZTE Linux
drivers for that device, nor even any Windows drivers.

Signed-off-by: Dan Williams 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

USB: option: blacklist network interface on Huawei E1820

2013-06-06T16:02:36+00:00

The mode used by Windows for the Huawei E1820 will use the
same ff/ff/ff class codes for both serial and network
functions.

Reported-by: Graham Inggs 
Signed-off-by: Bjørn Mork 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card

2013-05-17T01:04:16+00:00

A rebranded Novatel E371 for AT&T's LTE bands.

Cc: stable 
Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

USB: Blacklisted Cinterion's PLxx WWAN Interface

2013-05-17T00:29:52+00:00

/drivers/usb/serial/option.c: Blacklisted Cinterion's PLxx WWAN
Interface (USB Interface 4), because it will be handled by QMI WWAN
driver. Product IDs renamed.

Signed-off-by: Hans-Christoph Schemmel 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

usb: option: Add Telewell TW-LTE 4G

2013-05-17T00:29:51+00:00

Information from driver description files:

  diag:  VID_19D2&PID_0412&MI_00
  nmea:  VID_19D2&PID_0412&MI_01
  at:    VID_19D2&PID_0412&MI_02
  modem: VID_19D2&PID_0412&MI_03
  net:   VID_19D2&PID_0412&MI_04

Signed-off-by: Teppo Kotilainen 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2013-04-29T19:19:23+00:00

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB pull request for 3.10-rc1.

  Lots of USB patches here, the majority being USB gadget changes and
  USB-serial driver cleanups, the rest being ARM build fixes / cleanups,
  and individual driver updates.  We also finally got some chipidea
  fixes, which have been delayed for a number of kernel releases, as the
  maintainer has now reappeared.

  All of these have been in linux-next for a while"

* tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits)
  USB: ehci-msm: USB_MSM_OTG needs USB_PHY
  USB: OHCI: avoid conflicting platform drivers
  USB: OMAP: ISP1301 needs USB_PHY
  USB: lpc32xx: ISP1301 needs USB_PHY
  USB: ftdi_sio: enable two UART ports on ST Microconnect Lite
  usb: phy: tegra: don't call into tegra-ehci directly
  usb: phy: phy core cannot yet be a module
  USB: Fix initconst in ehci driver
  usb-storage: CY7C68300A chips do not support Cypress ATACB
  USB: serial: option: Added support Olivetti Olicard 145
  USB: ftdi_sio: correct ST Micro Connect Lite PIDs
  ARM: mxs_defconfig: add CONFIG_USB_PHY
  ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY
  usb: phy: remove exported function from __init section
  usb: gadget: zero: put function instances on unbind
  usb: gadget: f_sourcesink.c: correct a copy-paste misnomer
  usb: gadget: cdc2: fix error return code in cdc_do_config()
  usb: gadget: multi: fix error return code in rndis_do_config()
  usb: gadget: f_obex: fix error return code in obex_bind()
  USB: storage: convert to use module_usb_driver()
  ...

USB: serial: option: Added support Olivetti Olicard 145

2013-04-23T17:08:13+00:00

This adds PID for Olivetti Olicard 145 in option.c

Signed-off-by: Filippo Turato 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

USB: option: add a D-Link DWM-156 variant

2013-04-09T23:38:05+00:00

Adding support for a Mediatek based device labelled as
D-Link Model: DWM-156, H/W Ver: A7

Also adding two other device IDs found in the Debian(!)
packages included on the embedded device driver CD.

This is a composite MBIM + serial ports + card reader device:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2001 ProdID=7d01 Rev= 3.00
S:  Manufacturer=D-Link,Inc
S:  Product=D-Link DWM-156
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=500us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Cc: stable 
Signed-off-by: Bjørn Mork 
Signed-off-by: Greg Kroah-Hartman

Merge 3.9-rc3 into tty-next

2013-03-21T23:07:34+00:00

TTY: add tty_port_tty_hangup helper

2013-03-18T23:24:29+00:00

It allows for cleaning up on a considerable amount of places. They did
port_get, hangup, kref_put. Now the only thing needed is to call
tty_port_tty_hangup which does exactly that. And they can also decide
whether to consider CLOCAL or completely ignore that.

Signed-off-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman