linux.git/drivers/usb/serial/Makefile, branch v2.6.34

USB: qcaux: driver for auxiliary serial ports on Qualcomm devices

2010-03-02T22:55:19+00:00

qcaux: add driver for QCDM-capable ports on various devices

Many Qualcomm-based devices provide a CDC-ACM port which accepts
normal AT commands and PPP connections.  But they only provide one
which makes status or signal strength requests impossible while
PPP is active.  They also provide secondary USB interfaces that
talk the Qualcomm Diagnostic Monitor (QCDM) protocol which can be
used for status and strength.  Make those QCDM ports accessible.

Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

USB: serial: Add support for ViVOtech ViVOpay devices.

2010-03-02T22:54:57+00:00

Add support for USB serial interface provided by ViVOtech ViVOpay devices via
new driver vivopay-serial.  Currently only the ViVOpay 8800 device is supported,
but support for similar devices can be added by adding the appropriate device
IDs to the driver.

Signed-off-by: Forest Bond 
Signed-off-by: Greg Kroah-Hartman

USB: serial: rename cp2101 driver to cp210x

2009-03-24T23:20:44+00:00

Lots of users are getting confused about the cp2101 driver.  It really
does support more than just the cp2101 device, so rename it to cp210x to
try to prevent confusion.

Cc: Craig Shelley 
Signed-off-by: Greg Kroah-Hartman

USB: serial: add qualcomm wireless modem driver

2009-03-24T23:20:32+00:00

Driver originally written by Qualcomm, but rewritten by me due to the
totally different coding style.  Cleaned up the probe logic to make a
bit more sense, this is one wierd device.  They could have prevented all
of this by just writing sane firmware for the modem.

Cc: Tamm Liu 
Signed-off-by: Greg Kroah-Hartman

USB: serial: add symbol serial driver

2009-03-24T23:20:32+00:00

This is for the Symbol 6608 barcode scanner in a fake "HID" mode.

Thanks to Dalibor Grgec for working with me to get this to start to work
properly.

Cc: Dalibor Grgec 
Signed-off-by: Greg Kroah-Hartman

USB: add siemens_mpi usb-serial "stub" driver

2009-01-07T18:00:13+00:00

This driver got rescued from a few years ago and was requested to be
added.  So I cleaned it up, ported it to the latest kernel version and
here it is.

Cc: Thomas Hergenhahn 
Cc: Emmanuele 
Signed-off-by: Greg Kroah-Hartman

USB: add new opticon serial driver

2009-01-07T18:00:13+00:00

This is for the serial mode of the Opticon barcode scanner.

Cc: Kees Stoop 
Signed-off-by: Greg Kroah-Hartman

USB: delete airprime driver

2008-07-21T22:16:31+00:00

This driver is only for one device id, and the option driver should be
used instead for it.

Signed-off-by: Greg Kroah-Hartman

USB: add new moto_modem driver for some Morotola phones

2008-05-14T17:00:25+00:00

This should work on a KRZR K1m, and some other Motorola phones that do
not use the "standard" cdc ACM protocol to talk to USB hosts.

Tested-by: Jeff Garzik 
Cc: Jiang Dejun 
Signed-off-by: Greg Kroah-Hartman

USB: add usb-serial spcp8x5 driver

2008-04-25T04:16:44+00:00

Original version of the driver done by Linxb, changes by Harald, and
lots of cleanups by me in order to get it into a mergable state.

Cc: Linxb 
Cc: Harald Klein 
Signed-off-by: Greg Kroah-Hartman