linux.git/drivers/usb/phy, branch v4.3-rc2

usb: phy: phy-keystone: Simplify return statement

2015-08-04T16:02:05+00:00

Replace redundant variable use in return statement.

Signed-off-by: Saurabh Karajgaonkar 
Signed-off-by: Felipe Balbi

usb: phy: phy-mxs-usb: Simplify return statement

2015-08-04T16:01:50+00:00

Replace redundant variable use in return statement.

Signed-off-by: Saurabh Karajgaonkar 
Signed-off-by: Felipe Balbi

usb: phy: msm: Add D+/D- lines route control

2015-07-30T16:43:36+00:00

apq8016-sbc board is using Dual SPDT USB Switch (TC7USB40MU),
witch is controlled by GPIO to de/multiplex D+/D- USB lines to
USB2513B Hub and uB connector. Add support for this.

Signed-off-by: Ivan T. Ivanov 
Signed-off-by: Felipe Balbi

usb: phy: qcom: New APQ8016/MSM8916 USB transceiver driver

2015-07-29T14:59:19+00:00

Driver handles PHY initialization, clock management, power
management and workarounds required after resetting the hardware.

Signed-off-by: Ivan T. Ivanov 
Signed-off-by: Felipe Balbi

usb: pass flags parameter to gpiod_get functions

2015-07-29T14:59:19+00:00

Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.

Currently this parameter is made optional with the help of a cpp trick.
To allow dropping this hack convert callers to explictly pass a value
for flags.

Acked-by: Felipe Balbi 
Acked-by: Robert Jarzmik 
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Felipe Balbi

usb: phy: msm-usb: Replace deprecated API of extcon

2015-07-29T14:59:18+00:00

This patch removes the deprecated notifier API of extcon framwork
and then use the new extcon API with the unique id to indicate
the each external connector (USB, USB-HOST).

Alter deprecated API as following:
- extcon_register_interest() -> extcon_register_notifier()
- extcon_get_cable_state(*edev, char *) -> extcon_get_cable_state_(*edev, id)

Cc: Felipe Balbi 
Cc: Greg Kroah-Hartman 
Signed-off-by: Chanwoo Choi 
Signed-off-by: Felipe Balbi

usb: phy: tahvo: Use devm_extcon_dev_[allocate|register]() and replace deprecated API

2015-07-29T14:59:18+00:00

This patch uses the devm_extcon_dev_[allocate|register]() to manage the
resource automatically and replace deprecated API as following:
- extcon_[set|get]_cable_state(*edev, char *) -> extcon_[set|get]_cable_state_(*edev, id)

Cc: Felipe Balbi 
Cc: Greg Kroah-Hartman 
Signed-off-by: Chanwoo Choi 
Signed-off-by: Felipe Balbi

usb: phy: omap-otg: Replace deprecated API of extcon

2015-07-29T14:59:18+00:00

This patch removes the deprecated notifier API of extcon framwork
and then use the new extcon API with the unique id to indicate
the each external connector (USB, USB-HOST).

Alter deprecated API as following:
- extcon_register_interest() -> extcon_register_notifier()
- extcon_get_cable_state(*edev, char *) -> extcon_get_cable_state_(*edev, id)

[ balbi@ti.com : fix build break ]

Cc: Greg Kroah-Hartman 
Signed-off-by: Chanwoo Choi 
Signed-off-by: Felipe Balbi

usb: phy: mxs: suspend to RAM causes NULL pointer dereference

2015-07-06T17:34:08+00:00

Triggering suspend to RAM via sysfs on a i.MX28 causes a NULL pointer
dereference. This patch avoids the oops in mxs_phy_get_vbus_status()
by aborting since there is no syscon available.

Signed-off-by: Stefan Wahren 
Fixes: efdbd3a5d6e ("usb: phy: mxs: do not set PWD.RXPWD1PT1 for low speed connection")
CC:  # 4.0
Acked-by: Peter Chen 
Signed-off-by: Felipe Balbi

Merge tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2015-06-26T22:59:26+00:00

Pull USB updates from Greg KH:
 "Here's the big USB patchset for 4.2-rc1.  As is normal these days, the
  majority of changes are in the gadget drivers, with a bunch of other
  small driver changes.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits)
  usb: dwc3: Use ASCII space in Kconfig
  usb: chipidea: add work-around for Marvell HSIC PHY startup
  usb: chipidea: allow multiple instances to use default ci_default_pdata
  dt-bindings: Consolidate ChipIdea USB ci13xxx bindings
  phy: add Marvell HSIC 28nm PHY
  phy: Add Marvell USB 2.0 OTG 28nm PHY
  dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings
  USB: ssb: use devm_kzalloc
  USB: ssb: fix error handling in ssb_hcd_create_pdev()
  usb: isp1760: check for null return from kzalloc
  cdc-acm: Add support of ATOL FPrint fiscal printers
  usb: chipidea: usbmisc_imx: Remove unneeded semicolon
  USB: usbtmc: add device quirk for Rigol DS6104
  USB: serial: mos7840: Use setup_timer
  phy: twl4030-usb: add ABI documentation
  phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function.
  phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback.
  phy: twl4030-usb: make runtime pm more reliable.
  drivers:usb:fsl: Fix compilation error for fsl ehci drv
  usb: renesas_usbhs: Don't disable the pipe if Control write status stage
  ...