linux.git/drivers/usb/otg, branch v2.6.39 Linux kernel source tree Fix common misspellings 2011-03-31T14:26:23+00:00 Lucas De Marchi lucas.demarchi@profusion.mobi 2011-03-31T01:57:33+00:00 25985edcedea6396277003854657b5f3cb31a628 Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> 
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-03-18T02:28:15+00:00 Linus Torvalds torvalds@linux-foundation.org 2011-03-18T02:28:15+00:00 0df0914d414a504b975f3cc66ace0c16ef55b7f3 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h 
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h
usb: otg: Add ulpi viewport access ops 2011-03-11T22:22:10+00:00 Benoit Goby benoit@android.com 2011-03-10T00:28:54+00:00 ee398ba97dd76ed53bed548dec648d918af4004c Add generic access ops for controllers with a ulpi viewport register (e.g. Chipidea/ARC based controllers). Signed-off-by: Benoit Goby <benoit@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
Add generic access ops for controllers with a ulpi viewport register
(e.g. Chipidea/ARC based controllers).

Signed-off-by: Benoit Goby <benoit@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB OTG Langwell: use simple IPC command to control VBus power. 2011-03-09T23:40:04+00:00 Hao Wu hao.wu@intel.com 2011-03-09T12:41:08+00:00 1f15318cdae665550746e7fcdfe5ef41bf2360af Direct access to PMIC register is not safe and will impact battery charging. New IPC command supported in SCU FW for VBus power control. USB OTG driver will switch to such commands instead of direct access to PMIC register for safety and SCU FW will handle the actual work after got the request(IPC command). Due to this change, usb driver should wait more time for sync OTGSC with USBCFG by SCU. Update wait time from 2ms to 5ms. Signed-off-by: Hao Wu <hao.wu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
Direct access to PMIC register is not safe and will impact battery
charging. New IPC command supported in SCU FW for VBus power control.
USB OTG driver will switch to such commands instead of direct access
to PMIC register for safety and SCU FW will handle the actual work
after got the request(IPC command).

Due to this change, usb driver should wait more time for sync OTGSC
with USBCFG by SCU. Update wait time from 2ms to 5ms.

Signed-off-by: Hao Wu <hao.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: Rename "msm72k_otg.c" to "msm_otg.c" 2011-03-07T20:15:21+00:00 Pavankumar Kondeti pkondeti@codeaurora.org 2011-03-04T17:15:02+00:00 dfb2130c453c2c6d36b5e0f39eca289cbdbb631d This driver is used across all MSM SoCs. Hence give a generic name. All Functions and strutures are also using "msm_otg" as prefix. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
This driver is used across all MSM SoCs.  Hence give a generic name.
All Functions and strutures are also using "msm_otg" as prefix.

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
usb: otg: TWL4030: Update the last_event variable. 2011-03-01T09:35:27+00:00 Hema HK hemahk@ti.com 2011-02-28T08:49:32+00:00 37db3af11f02c2ccdf44a788694da16062a0333c Update the last_event variable of otg_transceiver. This will be used in the musb platform glue driver for runtime idling the device. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
Update the last_event variable of otg_transceiver. This will be used in
the musb platform glue driver for runtime idling the device.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: otg: notifier: switch to atomic notifier 2011-02-18T12:05:54+00:00 Felipe Balbi balbi@ti.com 2010-09-29T07:55:49+00:00 cccad6d4b103e53fb3d1fc1467f654ecb572d047 most of our notifications, will be called from IRQ context, so an atomic notifier suits the job better. Signed-off-by: Felipe Balbi <balbi@ti.com> 
most of our notifications, will be called from IRQ
context, so an atomic notifier suits the job better.

Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: otg: TWL6030 Save the last event in otg_transceiver 2011-02-18T12:05:52+00:00 Hema HK hemahk@ti.com 2011-02-17T06:36:09+00:00 647b2d9c61fe9a842dd89eb01b5f01e9d437993c Save the last event in the otg_transceiver so that it can used in the musb driver and gadget driver to configure the musb and enable the vbus for host mode and OTG mode, if the device is connected during boot. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
Save the last event in the otg_transceiver so that it can used in the
musb driver and gadget driver to configure the musb and enable the
vbus for host mode and OTG mode, if the device is connected during boot.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: otg: TWL6030: Introduce the twl6030_phy_suspend function. 2011-02-18T12:05:50+00:00 Hema HK hemahk@ti.com 2011-02-17T06:36:08+00:00 070b8ed96e01adeb978d4f8487fb1350a28fcd0d Introduce the twl6030_phy_suspend function and assign to otg.set_suspend function pointer. This function is used by the musb-omap2430 platform driver during suspend/resume. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
Introduce the twl6030_phy_suspend function and assign to otg.set_suspend
function pointer.
This function is used by the musb-omap2430 platform driver
during suspend/resume.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: otg: Remove one unnecessary I2C read request. 2011-02-17T19:11:46+00:00 Hema HK hemahk@ti.com 2011-02-17T06:36:05+00:00 31e9992ab09264ed1372ba86a0924899ab08700b To get the ID status there was an I2C read transfer. Removed this I2C read transfer as this info can be used from existing variable(linkstat). Signed-off-by: Hema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
To get the ID status there was an I2C read transfer. Removed this I2C
read transfer as this info can be used from existing variable(linkstat).

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>