linux.git/drivers/usb/musb, branch v5.8 Linux kernel source tree usb: musb: Fix runtime PM imbalance on error 2020-05-25T11:36:31+00:00 Dinghao Liu dinghao.liu@zju.edu.cn 2020-05-25T02:50:49+00:00 e4befc121df03dc8ed2ac1031c98f9538e244bae When copy_from_user() returns an error code, there is a runtime PM usage counter imbalance. Fix this by moving copy_from_user() to the beginning of this function. Fixes: 7b6c1b4c0e1e ("usb: musb: fix runtime PM in debugfs") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200525025049.3400-7-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When copy_from_user() returns an error code, there
is a runtime PM usage counter imbalance.

Fix this by moving copy_from_user() to the beginning
of this function.

Fixes: 7b6c1b4c0e1e ("usb: musb: fix runtime PM in debugfs")

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200525025049.3400-7-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set 2020-05-25T11:36:30+00:00 Paul Cercueil paul@crapouillou.net 2020-05-25T02:50:48+00:00 685f5f24108a5f3481da70ee75a1b18b9de34257 The function dma_controller_irq() locks up the exact same spinlock we locked before calling it, which obviously resulted in a deadlock when CONFIG_SMP was enabled. This flew under the radar as none of the boards supported by this driver needs SMP. Fixes: 57aadb46bd63 ("usb: musb: jz4740: Add support for DMA") Cc: stable@vger.kernel.org Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200525025049.3400-6-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The function dma_controller_irq() locks up the exact same spinlock we
locked before calling it, which obviously resulted in a deadlock when
CONFIG_SMP was enabled. This flew under the radar as none of the boards
supported by this driver needs SMP.

Fixes: 57aadb46bd63 ("usb: musb: jz4740: Add support for DMA")

Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200525025049.3400-6-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle 2020-05-25T11:36:30+00:00 Macpaul Lin macpaul.lin@mediatek.com 2020-05-25T02:50:47+00:00 402bcac4b25b520c89ba60db85eb6316f36e797f When receiving reset interrupt, FADDR need to be reset to zero in peripheral mode. Otherwise ep0 cannot do enumeration when re-plugging USB cable. Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Acked-by: Min Guo <min.guo@mediatek.com> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200525025049.3400-5-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When receiving reset interrupt, FADDR need to be reset to zero in
peripheral mode. Otherwise ep0 cannot do enumeration when re-plugging USB
cable.

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Acked-by: Min Guo <min.guo@mediatek.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200525025049.3400-5-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: musb: use true for 'use_dma' 2020-05-25T11:36:30+00:00 Jason Yan yanaijie@huawei.com 2020-05-25T02:50:46+00:00 e62361c721453b5cf76ce3bb8680fb8bc0832098 Fix the following coccicheck warning: drivers/usb/musb/musb_core.c:1798:12-19: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200525025049.3400-4-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Fix the following coccicheck warning:

drivers/usb/musb/musb_core.c:1798:12-19: WARNING: Assignment of 0/1 to
bool variable

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200525025049.3400-4-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: musb: start session in resume for host port 2020-05-25T11:36:30+00:00 Bin Liu b-liu@ti.com 2020-05-25T02:50:45+00:00 7f88a5ac393f39319f69b8b20cc8d5759878d1a1 Commit 17539f2f4f0b ("usb: musb: fix enumeration after resume") replaced musb_start() in musb_resume() to not override softconnect bit, but it doesn't restart the session for host port which was done in musb_start(). The session could be disabled in musb_suspend(), which leads the host port doesn't stay in host mode. So let's start the session specifically for host port in musb_resume(). Fixes: 17539f2f4f0b ("usb: musb: fix enumeration after resume") Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200525025049.3400-3-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Commit 17539f2f4f0b ("usb: musb: fix enumeration after resume") replaced
musb_start() in musb_resume() to not override softconnect bit, but it
doesn't restart the session for host port which was done in musb_start().
The session could be disabled in musb_suspend(), which leads the host
port doesn't stay in host mode.

So let's start the session specifically for host port in musb_resume().

Fixes: 17539f2f4f0b ("usb: musb: fix enumeration after resume")

Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200525025049.3400-3-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: musb: return -ESHUTDOWN in urb when three-strikes error happened 2020-05-25T11:36:30+00:00 Bin Liu b-liu@ti.com 2020-05-25T02:50:44+00:00 1b967691ecdcf512bc33c0783158f760e5c1a9cf When a USB device attached to a hub got disconnected, MUSB controller generates RXCSR_RX_ERROR interrupt for the 3-strikes-out error. Currently the MUSB host driver returns -EPROTO in current URB, then the USB device driver could immediately resubmit the URB which causes MUSB generate RXCSR_RX_ERROR interrupt again. This circle causes interrupt storm then the hub never got a chance to report the USB device detach. To fix the interrupt storm, change the URB return code to -ESHUTDOWN for MUSB_RXCSR_H_ERROR interrupt, so that the USB device driver will not immediately resubmit the URB. Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200525025049.3400-2-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When a USB device attached to a hub got disconnected, MUSB controller
generates RXCSR_RX_ERROR interrupt for the 3-strikes-out error.

Currently the MUSB host driver returns -EPROTO in current URB, then the
USB device driver could immediately resubmit the URB which causes MUSB
generate RXCSR_RX_ERROR interrupt again. This circle causes interrupt
storm then the hub never got a chance to report the USB device detach.

To fix the interrupt storm, change the URB return code to -ESHUTDOWN for
MUSB_RXCSR_H_ERROR interrupt, so that the USB device driver will not
immediately resubmit the URB.

Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200525025049.3400-2-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: musb: Use the correct style for SPDX License Identifier 2020-04-16T12:32:47+00:00 Nishad Kamdar nishadkamdar@gmail.com 2020-04-04T10:49:55+00:00 6814c73fdc46cc5d0ece070af507cb95666b3f6a This patch corrects the SPDX License Identifier style in header files related to USB Dual Role (OTG-ready) Controller Drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Link: https://lore.kernel.org/r/20200404104952.GA6575@nishad Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch corrects the SPDX License Identifier style in
header files related to USB Dual Role (OTG-ready) Controller Drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Link: https://lore.kernel.org/r/20200404104952.GA6575@nishad
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: musb: tusb6010: fix a possible missing data type replacement 2020-03-17T19:03:28+00:00 Macpaul Lin macpaul.lin@mediatek.com 2020-03-16T21:11:36+00:00 1e1769daeeed5d927738ba54c75041b0ddd78347 Replace "unsigned" to "u32" for checkpatch fix to tusb_writeb(). Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-9-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Replace "unsigned" to "u32" for checkpatch fix to tusb_writeb().

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200316211136.2274-9-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: musb: fix crash with highmen PIO and usbmon 2020-03-17T19:03:28+00:00 Mans Rullgard mans@mansr.com 2020-03-16T21:11:35+00:00 52974d94a206ce428d9d9b6eaa208238024be82a When handling a PIO bulk transfer with highmem buffer, a temporary mapping is assigned to urb->transfer_buffer. After the transfer is complete, an invalid address is left behind in this pointer. This is not ordinarily a problem since nothing touches that buffer before the urb is released. However, when usbmon is active, usbmon_urb_complete() calls (indirectly) mon_bin_get_data() which does access the transfer buffer if it is set. To prevent an invalid memory access here, reset urb->transfer_buffer to NULL when finished (musb_host_rx()), or do not set it at all (musb_host_tx()). Fixes: 8e8a55165469 ("usb: musb: host: Handle highmem in PIO mode") Signed-off-by: Mans Rullgard <mans@mansr.com> Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-8-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When handling a PIO bulk transfer with highmem buffer, a temporary
mapping is assigned to urb->transfer_buffer.  After the transfer is
complete, an invalid address is left behind in this pointer.  This is
not ordinarily a problem since nothing touches that buffer before the
urb is released.  However, when usbmon is active, usbmon_urb_complete()
calls (indirectly) mon_bin_get_data() which does access the transfer
buffer if it is set.  To prevent an invalid memory access here, reset
urb->transfer_buffer to NULL when finished (musb_host_rx()), or do not
set it at all (musb_host_tx()).

Fixes: 8e8a55165469 ("usb: musb: host: Handle highmem in PIO mode")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200316211136.2274-8-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: musb: jz4740: Add support for the JZ4770 2020-03-17T19:03:28+00:00 Paul Cercueil paul@crapouillou.net 2020-03-16T21:11:34+00:00 e72838d47dc18a066b2b20b9d3f44c93ca82fe96 Add support for probing the jz4740-musb driver on the JZ4770 SoC. The USB IP in the JZ4770 works the same Inventra IP as for the JZ4740, but it features more endpoints, and officially supports OTG. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-7-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add support for probing the jz4740-musb driver on the JZ4770 SoC.

The USB IP in the JZ4770 works the same Inventra IP as for the JZ4740,
but it features more endpoints, and officially supports OTG.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200316211136.2274-7-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>