Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for 7.3-rc1.

  Lots of driver work for new devices and systems, and many other minor
  fixes and updates. Included in here are:

   - Thunderbolt subsystem driver updates and additions

   - typec driver updates and additions

   - usb gadget fixes all over the place, seems like people are finally
     paying attention to these drivers for some reason

   - xhci driver updates and fixes based on lots of reports

   - usb-serial driver updates and additions

   - new device ids

   - other minor USB driver updates and fixes

  All of these have been in linux-next for a while with no reported issues"

* tag 'usb-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (163 commits)
  usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()
  usb: typec: hd3ss3220: fix VBUS regulator error message
  usb: usbfs: fix use-after-free of usb_device in usbdev_release()
  usb: gadget: u_audio: Fix use-after-free on sound card disconnect
  usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
  usb: gadget: f_tcm: keep port count until LUN teardown completes
  usb: usbtest: disable dynamic ID support
  usb: typec: tcpci: pass correct rx_type to tcpm_pd_receive()
  USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
  usb: typec: ucsi: use UCSI_TIMEOUT_MS for sync command completion
  usb: gadget: snps_udc_plat: clean up PHY on probe deferral
  usb: gadget: f_tcm: fix deadlock in usbg_make_tpg()
  usb: dwc2: gadget: Exit partial power down state when changing USB pull-up
  usb: gadget: f_fs: Fix Use-After-Free in AIO error path
  usb: gadget: f_fs: Prevent deadlock during ep0 read loop
  usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
  usb: gadget: midi2: remove default configfs groups on teardown
  usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init()
  usb: typec: thunderbolt: Disable work before freeing tbt on remove
  usb: xhci: Handle bogus TRB pointers in Missed Service Error events
  ...

We need the driver-core fixes in here as well to build on top of.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

'select' does not work on config options in a 'choice', so currently it is
possible to enable USB_MUSB_POLARFIRE_SOC without USB_MUSB_DUAL_ROLE.

Remove the dead select, as it is unnecessary, from this conversation:
https://lore.kernel.org/all/20260712-parole-stoning-d7e66a0961a8@spud/

This dead select was found by kconfirm, a static analysis tool for Kconfig.

Suggested-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://patch.msgid.link/20260714112047.2304856-2-julianbraha@gmail.com
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Unplugging a busy USB Ethernet adapter can leave a stale RX interrupt
pending while the host handles MUSB_RXCSR_H_ERROR. On AM335x/DSPS
platforms this can retrigger the same three-strikes error before the
disconnect path completes, flooding the log and potentially leaving the
host port stuck until reboot.

Clear the pending endpoint RX interrupt when aborting the transfer so
the error storm is broken, and rate limit the error message to avoid
spamming the log while the fault path completes.

Signed-off-by: Lucas Martins Alves <lucas.alves@lumal21.com.br>
Link: https://patch.msgid.link/20260714134941.18508-1-lucas.alves@lumal21.com.br
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

omap2430_probe() stores pdev->dev.of_node in a local np variable. This is
a borrowed pointer and the probe function does not take a reference to
it.

The success and error paths nevertheless call of_node_put(np). This drops
a reference that is owned by the platform device, and can leave
pdev->dev.of_node with an unbalanced reference count.

Do not put the borrowed platform device node from omap2430_probe().
References taken for the child MUSB device are handled by the device core,
and the ctrl-module phandle reference is still released separately.

Fixes: ffbe2feac59b ("usb: musb: omap2430: Fix probe regression for missing resources")
Cc: stable <stable@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260713114711.955253-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Ahead of reworking the reference counting logic for platform devices,
encapsulate the assignment of the OF node from another device for
dynamically allocated platform devices with the provided helper.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-pdev-fwnode-ref-v3-18-1ff028e33779@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In omap2430_probe(), of_node_put(np) is called prematurely before the
last access to np, leading to a use-after-free if the node's reference
count drops to zero. Move the of_node_put() calls after the last use of
np in both the success and error paths.

Fixes: ffbe2feac59b ("usb: musb: omap2430: Fix probe regression for missing resources")
Cc: stable <stable@kernel.org>
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260409101104.480623-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a safer function strscpy() instead of strcpy() for copying to
arrays.

Only idiomatic code replacement, and no functional changes.

Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20260310094434.3639602-3-aichao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>