linux.git/drivers/usb/host, branch v3.13-rc2

Merge branch 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm

2013-11-13T22:55:21+00:00

Pull DMA mask updates from Russell King:
 "This series cleans up the handling of DMA masks in a lot of drivers,
  fixing some bugs as we go.

  Some of the more serious errors include:
   - drivers which only set their coherent DMA mask if the attempt to
     set the streaming mask fails.
   - drivers which test for a NULL dma mask pointer, and then set the
     dma mask pointer to a location in their module .data section -
     which will cause problems if the module is reloaded.

  To counter these, I have introduced two helper functions:
   - dma_set_mask_and_coherent() takes care of setting both the
     streaming and coherent masks at the same time, with the correct
     error handling as specified by the API.
   - dma_coerce_mask_and_coherent() which resolves the problem of
     drivers forcefully setting DMA masks.  This is more a marker for
     future work to further clean these locations up - the code which
     creates the devices really should be initialising these, but to fix
     that in one go along with this change could potentially be very
     disruptive.

  The last thing this series does is prise away some of Linux's addition
  to "DMA addresses are physical addresses and RAM always starts at
  zero".  We have ARM LPAE systems where all system memory is above 4GB
  physical, hence having DMA masks interpreted by (eg) the block layers
  as describing physical addresses in the range 0..DMAMASK fails on
  these platforms.  Santosh Shilimkar addresses this in this series; the
  patches were copied to the appropriate people multiple times but were
  ignored.

  Fixing this also gets rid of some ARM weirdness in the setup of the
  max*pfn variables, and brings ARM into line with every other Linux
  architecture as far as those go"

* 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits)
  ARM: 7805/1: mm: change max*pfn to include the physical offset of memory
  ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations
  ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations
  ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function
  ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit()
  ARM: DMA-API: better handing of DMA masks for coherent allocations
  ARM: 7857/1: dma: imx-sdma: setup dma mask
  DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks
  DMA-API: dcdbas: update DMA mask handing
  DMA-API: dma: edma.c: no need to explicitly initialize DMA masks
  DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks
  DMA-API: crypto: remove last references to 'static struct device *dev'
  DMA-API: crypto: fix ixp4xx crypto platform device support
  DMA-API: others: use dma_set_coherent_mask()
  DMA-API: staging: use dma_set_coherent_mask()
  DMA-API: usb: use new dma_coerce_mask_and_coherent()
  DMA-API: usb: use dma_set_coherent_mask()
  DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent()
  DMA-API: net: octeon: use dma_coerce_mask_and_coherent()
  DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent()
  ...

Merge tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2013-11-12T07:52:17+00:00

Pull devicetree updates from Rob Herring:
"DeviceTree updates for 3.13. This is a bit larger pull request than
usual for this cycle with lots of clean-up.

- Cross arch clean-up and consolidation of early DT scanning code.
- Clean-up and removal of arch prom.h headers. Makes arch specific
prom.h optional on all but Sparc.
- Addition of interrupts-extended property for devices connected to
multiple interrupt controllers.
- Refactoring of DT interrupt parsing code in preparation for
deferred probe of interrupts.
- ARM cpu and cpu topology bindings documentation.
- Various DT vendor binding documentation updates"

* tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits)
powerpc: add missing explicit OF includes for ppc
dt/irq: add empty of_irq_count for !OF_IRQ
dt: disable self-tests for !OF_IRQ
of: irq: Fix interrupt-map entry matching
MIPS: Netlogic: replace early_init_devtree() call
of: Add Panasonic Corporation vendor prefix
of: Add Chunghwa Picture Tubes Ltd. vendor prefix
of: Add AU Optronics Corporation vendor prefix
of/irq: Fix potential buffer overflow
of/irq: Fix bug in interrupt parsing refactor.
of: set dma_mask to point to coherent_dma_mask
of: add vendor prefix for PHYTEC Messtechnik GmbH
DT: sort vendor-prefixes.txt
of: Add vendor prefix for Cadence
of: Add empty for_each_available_child_of_node() macro definition
arm/versatile: Fix versatile irq specifications.
of/irq: create interrupts-extended property
microblaze/pci: Drop PowerPC-ism from irq parsing
of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code.
of/irq: Use irq_of_parse_and_map()
...

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-11-11T07:49:45+00:00

Pull ARM SoC platform changes from Olof Johansson:
 "New and updated SoC support.  Among the things new for this release
  are:

   - More support for the AM33xx platforms from TI
   - Tegra 124 support, and some updates to older tegra families as well
   - imx cleanups and updates across the board
   - A rename of Broadcom's Mobile platforms which were introduced as
     ARCH_BCM, and turned out to be too broad a name.  New name is
     ARCH_BCM_MOBILE.
   - A whole bunch of updates and fixes for integrator, making the
     platform code more modern and switches over to DT-only booting.
   - Support for two new Renesas shmobile chipsets.  Next up for them is
     more work on consolidation instead of introduction of new
     non-multiplatform SoCs, we're all looking forward to that!
   - Misc cleanups for older Samsung platforms, some Allwinner updates,
     etc"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits)
  ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config
  ARM: bcm_defconfig: Run "make savedefconfig"
  ARM: bcm281xx: Add ARCH Timers to config
  rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm)
  ARM: vexpress: Enable platform-specific options in defconfig
  ARM: vexpress: Make defconfig work again
  ARM: sunxi: remove .init_time hooks
  ARM: imx: enable suspend for imx6sl
  ARM: imx: ensure dsm_request signal is not asserted when setting LPM
  ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter()
  ARM: imx6q: move low-power code out of clock driver
  ARM: imx: drop extern with function prototypes in common.h
  ARM: imx: reset core along with enable/disable operation
  ARM: imx: do not return from imx_cpu_die() call
  ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING
  ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options
  ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO
  ARM: imx: replace imx6q_restart() with mxc_restart()
  ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt
  ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt
  ...

DMA-API: usb: use new dma_coerce_mask_and_coherent()

2013-10-31T14:49:04+00:00

Acked-by: Felipe Balbi 
Acked-by: Nicolas Ferre 
Signed-off-by: Russell King

DMA-API: usb: use dma_set_coherent_mask()

2013-10-31T14:49:01+00:00

The correct way for a driver to specify the coherent DMA mask is
not to directly access the field in the struct device, but to use
dma_set_coherent_mask().  Only arch and bus code should access this
member directly.

Convert all direct write accesses to using the correct API.

Acked-by: Felipe Balbi 
Acked-by: Nicolas Ferre 
Signed-off-by: Russell King

DMA-API: usb: ohci-sa1111: add a note about DMA masks

2013-10-31T14:48:44+00:00

Add a comment to explain why this driver doesn't call any of the DMA
API dma_set_mask() functions.

Signed-off-by: Russell King

DMA-API: usb: ssb-hcd: replace dma_set_mask()+dma_set_coherent_mask() with new helper

2013-10-31T14:48:36+00:00

Replace the following sequence:

	dma_set_mask(dev, mask);
	dma_set_coherent_mask(dev, mask);

with a call to the new helper dma_set_mask_and_coherent().

Signed-off-by: Russell King

DMA-API: usb: bcma: replace dma_set_mask()+dma_set_coherent_mask() with new helper

2013-10-31T14:48:34+00:00

Replace the following sequence:

	dma_set_mask(dev, mask);
	dma_set_coherent_mask(dev, mask);

with a call to the new helper dma_set_mask_and_coherent().

Signed-off-by: Russell King

USB: ehci-atmel: add usb_clk for transition to CCF

2013-10-30T16:41:49+00:00

The AT91 PMC (Power Management Controller) provides a USB clock used by
the different USB controllers (ehci, ohci and udc).
The atmel-ehci driver must configure the usb clock rate to 48Mhz in order
to get a fully functionnal USB host controller.
This configuration was formely done in mach-at91/clock.c, but will be
bypassed when moving to common clk framework.

This patch adds support for usb clock retrieval and configuration only if
CCF is enabled (CONFIG_COMMON_CLK).

Signed-off-by: Boris BREZILLON 
Cc: Nicolas Ferre 
Signed-off-by: Greg Kroah-Hartman

usb: wusbcore: add a quirk for Alereon HWA device isoc behavior

2013-10-29T23:44:49+00:00

Add a quirk for Alereon HWA devices to concatenate the frames of isoc
transfer requests.

Signed-off-by: Thomas Pugliese 
Signed-off-by: Greg Kroah-Hartman