linux.git/drivers/usb/host/Makefile, branch v3.19 Linux kernel source tree USB: host: Remove ehci-octeon and ohci-octeon drivers 2014-11-25T17:19:28+00:00 Alan Stern stern@rowland.harvard.edu 2014-11-25T11:28:46+00:00 2193dda5eec60373c7a061c129c6ab9d658f78e9 Remove special-purpose octeon drivers and instead use ehci-platform and ohci-platform as suggested with http://marc.info/?l=linux-mips&m=140139694721623&w=2 [andreas.herrmann: fixed compile error] Cc: David Daney <david.daney@cavium.com> Cc: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Remove special-purpose octeon drivers and instead use ehci-platform
and ohci-platform as suggested with
http://marc.info/?l=linux-mips&m=140139694721623&w=2

[andreas.herrmann:
    fixed compile error]

Cc: David Daney <david.daney@cavium.com>
Cc: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: host: st: fix typo 'CONFIG_USB_EHCI_HCD_ST' 2014-10-03T21:50:10+00:00 Paul Bolle pebolle@tiscali.nl 2014-10-03T08:21:44+00:00 4ed9a3d455558406cad83d38764ee659de25851c Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Fixes: 905e300e1043 ("USB: host: st: fix ehci/ohci driver selection") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Fixes: 905e300e1043 ("USB: host: st: fix ehci/ohci driver selection")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Allow xHCI drivers to be built as separate modules 2014-10-03T21:44:45+00:00 Andrew Bresticker abrestic@chromium.org 2014-10-03T08:35:29+00:00 29e409f0f7613f9fd2235e41f0fa33e48e94544e Instead of building all of the xHCI code into a single module, separate it out into the core (xhci-hcd), PCI (xhci-pci, now selected by the new config option CONFIG_USB_XHCI_PCI), and platform (xhci-plat) drivers. Also update the PCI/platform drivers with module descriptions/licenses and have them register their respective drivers in their initcalls. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Instead of building all of the xHCI code into a single module, separate
it out into the core (xhci-hcd), PCI (xhci-pci, now selected by the new
config option CONFIG_USB_XHCI_PCI), and platform (xhci-plat) drivers.
Also update the PCI/platform drivers with module descriptions/licenses
and have them register their respective drivers in their initcalls.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: host: st: fix ehci/ohci driver selection 2014-09-29T15:51:54+00:00 Arnd Bergmann arnd@arndb.de 2014-09-29T12:54:34+00:00 905e300e1043f5ff513840d342df5c985b3dc08c The newly added sti ehci and ohci drivers come with a single Kconfig entry that does not depend on either of the base drivers, which leads to a link error when they are disabled: drivers/built-in.o: In function `ohci_platform_init': :(.init.text+0x14788): undefined reference to `ohci_init_driver' To fix that, this patch introduces two separate Kconfig options with proper dependencies, which avoids the problem and is also more consistent with the other glue drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: d115837259ada ("usb: host: ohci-st: Add OHCI driver support for ST STB devices") Cc: Peter Griffin <peter.griffin@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The newly added sti ehci and ohci drivers come with a single
Kconfig entry that does not depend on either of the base drivers,
which leads to a link error when they are disabled:

drivers/built-in.o: In function `ohci_platform_init':
:(.init.text+0x14788): undefined reference to `ohci_init_driver'

To fix that, this patch introduces two separate Kconfig options
with proper dependencies, which avoids the problem and is also
more consistent with the other glue drivers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d115837259ada ("usb: host: ohci-st: Add OHCI driver support for ST STB devices")
Cc: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: host: ohci-st: Add OHCI driver support for ST STB devices 2014-09-24T04:35:50+00:00 Peter Griffin peter.griffin@linaro.org 2014-09-08T12:04:45+00:00 d115837259ada33cb66e8fedc365d58d2cc8df38 This patch adds the glue code required to ensure the on-chip OHCI controller works on STi consumer electronics SoC's from STMicroelectronics. It mainly manages the setting and enabling of the relevant clocks and manages the reset / power signals to the IP block. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch adds the glue code required to ensure the on-chip OHCI
controller works on STi consumer electronics SoC's from STMicroelectronics.

It mainly manages the setting and enabling of the relevant clocks and manages
the reset / power signals to the IP block.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers 2014-07-09T22:49:10+00:00 Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com 2014-07-09T01:08:52+00:00 4ac8918f3a737c21d81e250e4194c12ea2b7eb04 The R-Car H2 and M2 SoCs come with an xHCI controller that requires some specific initializations related to the firmware downloading and some specific registers. This patch adds the support for this special configuration as an xHCI quirk executed during probe and start. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: "mathias.nyman@intel.com" <mathias.nyman@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The R-Car H2 and M2 SoCs come with an xHCI controller that requires
some specific initializations related to the firmware downloading and
some specific registers. This patch adds the support for this special
configuration as an xHCI quirk executed during probe and start.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: "mathias.nyman@intel.com" <mathias.nyman@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: host: xhci-plat: add support for the Armada 375/38x XHCI controllers 2014-05-27T22:40:40+00:00 Gregory CLEMENT gregory.clement@free-electrons.com 2014-05-15T10:17:33+00:00 973747928514bb636e3fe6a13b7ec6d6d73100f0 The Armada 375 and 38x SoCs come with an XHCI controller that requires some specific initialization related to the MBus windows configuration. This patch adds the support for this special configuration as an XHCI quirk executed during probe. Two new compatible strings are added to identify the Armada 375 and Armada 38x XHCI controllers, and therefore enable the relevant quirk. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The Armada 375 and 38x SoCs come with an XHCI controller that requires
some specific initialization related to the MBus windows
configuration. This patch adds the support for this special
configuration as an XHCI quirk executed during probe.

Two new compatible strings are added to identify the Armada 375 and
Armada 38x XHCI controllers, and therefore enable the relevant quirk.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for using a MAX3421E chip as a host driver. 2014-05-27T22:20:33+00:00 David Mosberger davidm@egauge.net 2014-04-29T04:14:07+00:00 2d53139f31626bad6f8983d8e519ddde2cbba921 Signed-off-by: David Mosberger <davidm@egauge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Signed-off-by: David Mosberger <davidm@egauge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: kill DEBUG compile option 2013-12-03T18:34:33+00:00 Oliver Neukum oneukum@suse.de 2013-11-18T12:23:16+00:00 1c20163d30db28552a341d5e0d6c007d4c8dc8be In the drivers that no longer need it, it is removed. It is removed from the Makefile. Drivers not fully converted to dynamic debug have it shifted down into the individual drivers. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
In the drivers that no longer need it, it is removed.
It is removed from the Makefile. Drivers not fully converted
to dynamic debug have it shifted down into the individual
drivers.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: ohci: remove ep93xx bus glue platform driver 2013-10-29T23:43:37+00:00 H Hartley Sweeten hartleys@visionengravers.com 2013-10-21T20:39:04+00:00 e55f7cd2467631980f749fb0aef197c06ce38d6a Convert ep93xx to use the OHCI platform driver and remove the ohci-ep93xx bus glue driver. Enable CONFIG_OHCI_HCD_PLATFORM in the ep93xx_defconfig so that USB is still enabled by default on the EP93xx platform. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Convert ep93xx to use the OHCI platform driver and remove the
ohci-ep93xx bus glue driver.

Enable CONFIG_OHCI_HCD_PLATFORM in the ep93xx_defconfig so that USB
is still enabled by default on the EP93xx platform.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>