linux.git/drivers/usb/host/Kconfig, branch v4.1

ehci-msm: Remove dead dependency

2015-03-18T16:27:03+00:00

This dependency no longer exists now that mach-msm has been
removed. Delete it.

Cc: Greg Kroah-Hartman 
Cc: Alan Stern 
Cc: linux-usb@vger.kernel.org
Cc: David Brown 
Cc: Bryan Huntsman 
Cc: Daniel Walker 
Signed-off-by: Stephen Boyd 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2015-02-04T19:03:20+00:00

Felipe writes:

usb: patches for v3.20 merge window

Here's the big pull request for Gadgets and PHYs. It's
a total of 217 non-merge commits with pretty much everything
being touched.

The most important bits are a ton of new documentation for
almost all usb gadget functions, a new isp1760 UDC driver,
several improvements to the old net2280 UDC driver, and
some minor tracepoint improvements to dwc3.

Other than that, a big list of minor cleanups, smaller bugfixes
and new features all over the place.

Signed-off-by: Felipe Balbi

usb: kconfig: replace PPC_OF with PPC

2015-02-03T23:28:32+00:00

The PPC_OF is a ppc specific option which is used to mean that the
firmware device tree access functions are available. Since all the
ppc platforms have a device tree, it is aways set to 'y' for ppc.
So it makes no sense to keep a such option in the current kernel.
Replace it with PPC

Signed-off-by: Kevin Hao 
Signed-off-by: Greg Kroah-Hartman

usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/

2015-01-27T15:39:38+00:00

Now that this is DRD, it doesn't make sense to keep it under
drivers/usb/host.

Signed-off-by: Laurent Pinchart 
Signed-off-by: Felipe Balbi

USB: host: Remove ehci-octeon and ohci-octeon drivers

2014-11-25T17:19:28+00:00

Remove special-purpose octeon drivers and instead use ehci-platform
and ohci-platform as suggested with
http://marc.info/?l=linux-mips&m=140139694721623&w=2

[andreas.herrmann:
    fixed compile error]

Cc: David Daney 
Cc: Alex Smith 
Signed-off-by: Alan Stern 
Signed-off-by: Andreas Herrmann 
Acked-by: Ralf Baechle 
Tested-by: Aaro Koskinen 
Signed-off-by: Greg Kroah-Hartman

usb: Remove references to non-existent PLAT_S5P symbol

2014-11-03T23:26:16+00:00

The PLAT_S5P Kconfig symbol was removed in commit d78c16ccde96
("ARM: SAMSUNG: Remove remaining legacy code"). There are still
some references left, fix that by replacing them with ARCH_S5PV210.

Fixes: d78c16ccde96 ("ARM: SAMSUNG: Remove remaining legacy code")
Reported-by: Paul Bolle 
Acked-by: Jingoo Han 
Signed-off-by: Sylwester Nawrocki 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2014-10-08T10:47:31+00:00

Pull USB updates from Greg KH:
 "Here's the big USB patchset for 3.18-rc1.  Also in here is the PHY
  tree, as it seems to fit well with the USB tree for various reasons...

  Anyway, lots of little changes in here, all over the place, full
  details in the changelog

  All have been in the linux-next tree for a while with no issues"

* tag 'usb-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (244 commits)
  USB: host: st: fix typo 'CONFIG_USB_EHCI_HCD_ST'
  uas: Reduce number of function arguments for uas_alloc_foo functions
  xhci: Allow xHCI drivers to be built as separate modules
  xhci: Export symbols used by host-controller drivers
  xhci: Check for XHCI_COMP_MODE_QUIRK when disabling D3cold
  xhci: Introduce xhci_init_driver()
  usb: hcd: add generic PHY support
  usb: rename phy to usb_phy in HCD
  usb: gadget: uvc: fix up uvcg_v4l2_get_unmapped_area typo
  USB: host: st: fix ehci/ohci driver selection
  usb: host: ehci-exynos: Remove unnecessary usb-phy support
  usb: core: return -ENOTSUPP for all targeted hosts
  USB: Remove .owner field for driver
  usb: core: log higher level message on malformed LANGID descriptor
  usb: Add LED triggers for USB activity
  usb: Rename usb-common.c
  usb: gadget: Refactor request completion
  usb: gadget: Introduce usb_gadget_giveback_request()
  usb: dwc2/gadget: move phy bus legth initialization
  phy: remove .owner field for drivers using module_platform_driver
  ...

xhci: Allow xHCI drivers to be built as separate modules

2014-10-03T21:44:45+00:00

Instead of building all of the xHCI code into a single module, separate
it out into the core (xhci-hcd), PCI (xhci-pci, now selected by the new
config option CONFIG_USB_XHCI_PCI), and platform (xhci-plat) drivers.
Also update the PCI/platform drivers with module descriptions/licenses
and have them register their respective drivers in their initcalls.

Signed-off-by: Andrew Bresticker 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

USB: host: st: fix ehci/ohci driver selection

2014-09-29T15:51:54+00:00

The newly added sti ehci and ohci drivers come with a single
Kconfig entry that does not depend on either of the base drivers,
which leads to a link error when they are disabled:

drivers/built-in.o: In function `ohci_platform_init':
:(.init.text+0x14788): undefined reference to `ohci_init_driver'

To fix that, this patch introduces two separate Kconfig options
with proper dependencies, which avoids the problem and is also
more consistent with the other glue drivers.

Signed-off-by: Arnd Bergmann 
Fixes: d115837259ada ("usb: host: ohci-st: Add OHCI driver support for ST STB devices")
Cc: Peter Griffin 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

treewide: Fix typos in Kconfig

2014-09-26T09:12:28+00:00

This patch fix spelling typos found in Kconfig.

Signed-off-by: Masanari Iida 
Acked-by: Randy Dunlap 
Signed-off-by: Jiri Kosina