linux.git/drivers/usb/host/Kconfig, branch v3.0

USB: UHCI: Support big endian GRUSBHC HC

2011-05-19T23:45:32+00:00

This patch adds support for big endian GRUSBHC UHCI controllers.
The HCD bus glue will probe the register interface to determine
the endianness of the controller.

Tested on GR-LEON4-ITX board which has a controller with little endian
interface and on custom LEON3 board with a BE controller.

Signed-off-by: Jan Andersson 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: UHCI: Add support for big endian descriptors

2011-05-19T23:43:20+00:00

This patch adds support for universal host controllers that use
big endian descriptors. Support for BE descriptors requires a non-PCI
host controller. For kernels with PCI-only UHCI there should be no
change in behaviour.

This patch tries to replicate the technique used to support BE descriptors
in the EHCI HCD. Parts added to uhci-hcd.h are basically copy'n'paste from
ehci.h.

Signed-off-by: Jan Andersson 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: UHCI: Add support for big endian mmio

2011-05-19T23:43:19+00:00

This patch adds support for big endian mmio to the UHCI HCD. Big endian
mmio is supported by adding a flag bit to the UHCI HCD replicating the
solution used in the EHCI HCD.

When adding big endian support this patch also adds a check to see if we
need to support HCs with PCI I/O registers when we support HCs with MMIO.

This patch also adds 'const' to the register access functions' uhci_hcd
argument.

Signed-off-by: Jan Andersson 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: UHCI: Add support for GRLIB GRUSBHC controller

2011-05-07T01:24:02+00:00

This patch adds support for the UHCI part of the GRLIB GRUSBHC controller
found on some LEON/GRLIB SoCs.

The UHCI HCD previously only supported controllers connected over PCI.
This patch adds support for the first non-PCI UHCI HC. I have tried to
replicate the solution used in ehci-hcd.c.

Tested on GR-LEON4-ITX board (LEON4/GRLIB with GRUSBHC) and x86 with Intel
UHCI HC.

Signed-off-by: Jan Andersson 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: UHCI: Support non-PCI host controllers

2011-05-07T01:24:01+00:00

This patch is part of a series that extend the UHCI HCD to support
non-PCI host controllers.

This patch also extends the uhci_{read,write}* functions to allow accesses
to registers not mapped into PCI I/O space. This extension also includes
the addition of a void __iomem pointer to the uhci structure.

A new Kconfig option is added to signal that the system has a non-PCI HC.
If this Kconfig option is set, uhci-hcd.c will include generic reset functions
for systems that do not make use of keyboard and mouse legacy support. PCI
controllers will still always use the reset functions from pci-quirks

This patch is followed by a patch that adds bus glue for the first non-PCI
UHCI HC.

Signed-off-by: Jan Andersson 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: EHCI: Add bus glue for GRLIB GRUSBHC controller

2011-05-03T18:43:48+00:00

This patch adds support for the GRLIB GRUSBHC EHCI controller from
Aeroflex Gaisler. The controller is typically found on LEON/GRLIB
SoCs.

Tested on GR-LEON4-ITX with with little endian interface and on
LEON3 system on GR-PCI-XC5V development board for big endian
controller.

Signed-off-by: Jan Andersson 
Signed-off-by: Greg Kroah-Hartman

USB: ohci: add bus glue for the Atheros AR71XX/AR7240 SoCs

2011-04-13T23:58:19+00:00

The Atheros AR71XX/AR7240 SoCs have a built-in OHCI controller.
This patch adds the necessary glue code to make the generic OHCI
driver usable for them.

Signed-off-by: Gabor Juhos 
Signed-off-by: Imre Kaloz 
Cc: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: ehci: add bus glue for the Atheros AR71XX/AR724X/AR91XX SoCs

2011-04-13T23:57:44+00:00

The Atheros AR71XX/AR91XX SoCs have a built-in EHCI controller.
This patch adds the necessary glue code to make the generic EHCI
driver usable for them.

Signed-off-by: Gabor Juhos 
Signed-off-by: Imre Kaloz 
Cc: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: Add initial S5P EHCI driver

2011-04-13T23:50:52+00:00

This patch adds host USB high speed driver for samsung S5P series. This
is initial driver and we need additional implementation to support some
functions like power management.

Signed-off-by: Jingoo Han 
Signed-off-by: Joonyoung Shim 
Signed-off-by: Greg Kroah-Hartman

USB: sl811: add Kconfig option for ISOCHRONOUS mode

2011-04-13T23:26:12+00:00

Some bluetooth dongles want ISO mode, and the limited support that the
sl811 offers today is sufficient.  So add a Kconfig option for people
to optionally get access to the partial functionality.

Signed-off-by: Mike Frysinger 
Signed-off-by: Greg Kroah-Hartman