linux.git/drivers/usb/gadget/function, branch v4.11

Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2017-04-12T06:51:58+00:00

Pull SCSI target fixes from Nicholas Bellinger:

 "There has been work in a number of different areas over the last
  weeks, including:

   - Fix target-core-user (TCMU) back-end bi-directional handling (Xiubo
     Li + Mike Christie + Ilias Tsitsimpis)

   - Fix iscsi-target TMR reference leak during session shutdown (Rob
     Millner + Chu Yuan Lin)

   - Fix target_core_fabric_configfs.c race between LUN shutdown +
     mapped LUN creation (James Shen)

   - Fix target-core unknown fabric callback queue-full errors (Potnuri
     Bharat Teja)

   - Fix iscsi-target + iser-target queue-full handling in order to
     support iw_cxgb4 RNICs. (Potnuri Bharat Teja + Sagi Grimberg)

   - Fix ALUA transition state race between multiple initiator (Mike
     Christie)

   - Drop work-around for legacy GlobalSAN initiator, to allow QLogic
     57840S + 579xx offload HBAs to work out-of-the-box in MSFT
     environments. (Martin Svec + Arun Easi)

  Note that a number are CC'ed for stable, and although the queue-full
  bug-fixes required for iser-target to work with iw_cxgb4 aren't CC'ed
  here, they'll be posted to Greg-KH separately"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  tcmu: Skip Data-Out blocks before gathering Data-In buffer for BIDI case
  iscsi-target: Drop work-around for legacy GlobalSAN initiator
  target: Fix ALUA transition state race between multiple initiators
  iser-target: avoid posting a recv buffer twice
  iser-target: Fix queue-full response handling
  iscsi-target: Propigate queue_data_in + queue_status errors
  target: Fix unknown fabric callback queue-full errors
  tcmu: Fix wrongly calculating of the base_command_size
  tcmu: Fix possible overwrite of t_data_sg's last iov[]
  target: Avoid mappedlun symlink creation during lun shutdown
  iscsi-target: Fix TMR reference leak during session shutdown
  usb: gadget: Correct usb EP argument for BOT status request
  tcmu: Allow cmd_time_out to be set to zero (disabled)

usb: gadget: Correct usb EP argument for BOT status request

2017-03-30T08:36:50+00:00

This patch corrects the argument in usb_ep_free_request as it is
mistakenly set to ep_out. It should be ep_in for status request.

Signed-off-by: Manish Narani 
Acked-by: Felipe Balbi 
Signed-off-by: Nicholas Bellinger

usb: gadget: f_hid: fix: Don't access hidg->req without spinlock held

2017-03-22T09:21:10+00:00

hidg->req should be accessed only with write_spinlock held as it is
set to NULL when we get disabled by host.

Signed-off-by: Krzysztof Opasiak 
Signed-off-by: Felipe Balbi

usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed

2017-03-22T09:21:09+00:00

As per USB3.0 Specification "Table 9-20. Standard Endpoint Descriptor",
for interrupt and isochronous endpoints, wMaxPacketSize must be set to
1024 if the endpoint defines bMaxBurst to be greater than zero.

Reviewed-by: Laurent Pinchart 
Signed-off-by: Roger Quadros 
Signed-off-by: Felipe Balbi

usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval

2017-03-22T09:21:09+00:00

The streaming_maxburst module parameter is 0 offset (0..15)
so we must add 1 while using it for wBytesPerInterval
calculation for the SuperSpeed companion descriptor.

Without this host uvcvideo driver will always see the wrong
wBytesPerInterval for SuperSpeed uvc gadget and may not find
a suitable video interface endpoint.
e.g. for streaming_maxburst = 0 case it will always
fail as wBytePerInterval was evaluating to 0.

Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart 
Signed-off-by: Roger Quadros 
Signed-off-by: Felipe Balbi

usb: gadget: acm: fix endianness in notifications

2017-03-22T09:20:52+00:00

The gadget code exports the bitfield for serial status changes
over the wire in its internal endianness. The fix is to convert
to little endian before sending it over the wire.

Signed-off-by: Oliver Neukum 
Tested-by: 家瑋 
CC: 
Signed-off-by: Felipe Balbi

Revert "usb: gadget: f_fs: Fix ExtCompat descriptor validation"

2017-03-06T14:55:04+00:00

This reverts commit ac670a3a650b899fc020b81f63e810d06015b865.

This introduce bug we already fixed in
commit 53642399aa71 ("usb: gadget: f_fs: Fix wrong check on reserved1 wof OS_DESC_EXT_COMPAT")

Next FFS (adb) SS enumeration fail with Windows OS.

Signed-off-by: Janusz Dziedzic 
Signed-off-by: Felipe Balbi

Revert "usb: gadget: uvc: Add missing call for additional setup data"

2017-03-06T14:32:23+00:00

This reverts commit 4fbac5206afd01b717d4bdc58793d471f3391b4b.

This commit breaks g_webcam when used with uvc-gadget [1].

The user space application (e.g. uvc-gadget) is responsible for
sending response to UVC class specific requests on control endpoint
in uvc_send_response() in uvc_v4l2.c.

The bad commit was causing a duplicate response to be sent with
incorrect response data thus causing UVC probe to fail at the host
and broken control transfer endpoint at the gadget.

[1] - git://git.ideasonboard.org/uvc-gadget.git

Cc:  # v4.9+
Acked-by: Laurent Pinchart 
Signed-off-by: Roger Quadros 
Signed-off-by: Felipe Balbi

usb: gadget: function: f_fs: pass companion descriptor along

2017-03-06T08:09:37+00:00

If we're dealing with SuperSpeed endpoints, we need
to make sure to pass along the companion descriptor
and initialize fields needed by the Gadget
API. Eventually, f_fs.c should be converted to use
config_ep_by_speed() like all other functions,
though.

Cc: 
Signed-off-by: Felipe Balbi

sched/headers: Prepare to move signal wakeup & sigpending methods from into

2017-03-02T07:42:32+00:00

Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar