linux.git/drivers/usb/dwc3, branch v6.12 Linux kernel source tree usb: dwc3: fix fault at system suspend if device was already runtime suspended 2024-11-05T12:55:06+00:00 Roger Quadros rogerq@kernel.org 2024-11-04T14:00:11+00:00 9cfb31e4c89d200d8ab7cb1e0bb9e6e8d621ca0b If the device was already runtime suspended then during system suspend we cannot access the device registers else it will crash. Also we cannot access any registers after dwc3_core_exit() on some platforms so move the dwc3_enable_susphy() call to the top. Cc: stable@vger.kernel.org # v5.15+ Reported-by: William McVicker <willmcvicker@google.com> Closes: https://lore.kernel.org/all/ZyVfcUuPq56R2m1Y@google.com Fixes: 705e3ce37bcc ("usb: dwc3: core: Fix system suspend on TI AM62 platforms") Signed-off-by: Roger Quadros <rogerq@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Tested-by: Will McVicker <willmcvicker@google.com> Link: https://lore.kernel.org/r/20241104-am62-lpm-usb-fix-v1-1-e93df73a4f0d@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
If the device was already runtime suspended then during system suspend
we cannot access the device registers else it will crash.

Also we cannot access any registers after dwc3_core_exit() on some
platforms so move the dwc3_enable_susphy() call to the top.

Cc: stable@vger.kernel.org # v5.15+
Reported-by: William McVicker <willmcvicker@google.com>
Closes: https://lore.kernel.org/all/ZyVfcUuPq56R2m1Y@google.com
Fixes: 705e3ce37bcc ("usb: dwc3: core: Fix system suspend on TI AM62 platforms")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20241104-am62-lpm-usb-fix-v1-1-e93df73a4f0d@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: core: Fix system suspend on TI AM62 platforms 2024-10-16T08:25:48+00:00 Roger Quadros rogerq@kernel.org 2024-10-11T10:53:24+00:00 705e3ce37bccdf2ed6f848356ff355f480d51a91 Since commit 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init"), system suspend is broken on AM62 TI platforms. Before that commit, both DWC3_GUSB3PIPECTL_SUSPHY and DWC3_GUSB2PHYCFG_SUSPHY bits (hence forth called 2 SUSPHY bits) were being set during core initialization and even during core re-initialization after a system suspend/resume. These bits are required to be set for system suspend/resume to work correctly on AM62 platforms. Since that commit, the 2 SUSPHY bits are not set for DEVICE/OTG mode if gadget driver is not loaded and started. For Host mode, the 2 SUSPHY bits are set before the first system suspend but get cleared at system resume during core re-init and are never set again. This patch resovles these two issues by ensuring the 2 SUSPHY bits are set before system suspend and restored to the original state during system resume. Cc: stable@vger.kernel.org # v6.9+ Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init") Link: https://lore.kernel.org/all/1519dbe7-73b6-4afc-bfe3-23f4f75d772f@kernel.org/ Signed-off-by: Roger Quadros <rogerq@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Tested-by: Markus Schneider-Pargmann <msp@baylibre.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20241011-am62-lpm-usb-v3-1-562d445625b5@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Since commit 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init"),
system suspend is broken on AM62 TI platforms.

Before that commit, both DWC3_GUSB3PIPECTL_SUSPHY and DWC3_GUSB2PHYCFG_SUSPHY
bits (hence forth called 2 SUSPHY bits) were being set during core
initialization and even during core re-initialization after a system
suspend/resume.

These bits are required to be set for system suspend/resume to work correctly
on AM62 platforms.

Since that commit, the 2 SUSPHY bits are not set for DEVICE/OTG mode if gadget
driver is not loaded and started.
For Host mode, the 2 SUSPHY bits are set before the first system suspend but
get cleared at system resume during core re-init and are never set again.

This patch resovles these two issues by ensuring the 2 SUSPHY bits are set
before system suspend and restored to the original state during system resume.

Cc: stable@vger.kernel.org # v6.9+
Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init")
Link: https://lore.kernel.org/all/1519dbe7-73b6-4afc-bfe3-23f4f75d772f@kernel.org/
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20241011-am62-lpm-usb-v3-1-562d445625b5@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: Wait for EndXfer completion before restoring GUSB2PHYCFG 2024-10-16T08:25:28+00:00 Prashanth K quic_prashk@quicinc.com 2024-09-24T09:32:08+00:00 c96e31252110a84dcc44412e8a7b456b33c3e298 DWC3 programming guide mentions that when operating in USB2.0 speeds, if GUSB2PHYCFG[6] or GUSB2PHYCFG[8] is set, it must be cleared prior to issuing commands and may be set again after the command completes. But currently while issuing EndXfer command without CmdIOC set, we wait for 1ms after GUSB2PHYCFG is restored. This results in cases where EndXfer command doesn't get completed and causes SMMU faults since requests are unmapped afterwards. Hence restore GUSB2PHYCFG after waiting for EndXfer command completion. Cc: stable@vger.kernel.org Fixes: 1d26ba0944d3 ("usb: dwc3: Wait unconditionally after issuing EndXfer command") Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240924093208.2524531-1-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
DWC3 programming guide mentions that when operating in USB2.0 speeds,
if GUSB2PHYCFG[6] or GUSB2PHYCFG[8] is set, it must be cleared prior
to issuing commands and may be set again  after the command completes.
But currently while issuing EndXfer command without CmdIOC set, we
wait for 1ms after GUSB2PHYCFG is restored. This results in cases
where EndXfer command doesn't get completed and causes SMMU faults
since requests are unmapped afterwards. Hence restore GUSB2PHYCFG
after waiting for EndXfer command completion.

Cc: stable@vger.kernel.org
Fixes: 1d26ba0944d3 ("usb: dwc3: Wait unconditionally after issuing EndXfer command")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240924093208.2524531-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: core: Stop processing of pending events if controller is halted 2024-10-04T13:33:33+00:00 Selvarasu Ganesan selvarasu.g@samsung.com 2024-09-16T23:18:09+00:00 0d410e8913f5cffebcca79ffdd596009d4a13a28 This commit addresses an issue where events were being processed when the controller was in a halted state. To fix this issue by stop processing the events as the event count was considered stale or invalid when the controller was halted. Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM") Cc: stable@kernel.org Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com> Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240916231813.206-1-selvarasu.g@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This commit addresses an issue where events were being processed when
the controller was in a halted state. To fix this issue by stop
processing the events as the event count was considered stale or
invalid when the controller was halted.

Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM")
Cc: stable@kernel.org
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240916231813.206-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: re-enable runtime PM after failed resume 2024-10-04T13:32:39+00:00 Roy Luo royluo@google.com 2024-09-13T23:21:45+00:00 897e13a8f9a23576eeacb95075fdded97b197cc3 When dwc3_resume_common() returns an error, runtime pm is left in suspended and disabled state in dwc3_resume(). Since the device is suspended, its parent devices (like the power domain or glue driver) could also be suspended and may have released resources that dwc requires. Consequently, calling dwc3_suspend_common() in this situation could result in attempts to access unclocked or unpowered registers. To prevent these problems, runtime PM should always be re-enabled, even after failed resume attempts. This ensures that dwc3_suspend_common() is skipped in such cases. Fixes: 68c26fe58182 ("usb: dwc3: set pm runtime active before resume common") Cc: stable@vger.kernel.org Signed-off-by: Roy Luo <royluo@google.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240913232145.3507723-1-royluo@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When dwc3_resume_common() returns an error, runtime pm is left in
suspended and disabled state in dwc3_resume(). Since the device
is suspended, its parent devices (like the power domain or glue
driver) could also be suspended and may have released resources
that dwc requires. Consequently, calling dwc3_suspend_common() in
this situation could result in attempts to access unclocked or
unpowered registers.
To prevent these problems, runtime PM should always be re-enabled,
even after failed resume attempts. This ensures that
dwc3_suspend_common() is skipped in such cases.

Fixes: 68c26fe58182 ("usb: dwc3: set pm runtime active before resume common")
Cc: stable@vger.kernel.org
Signed-off-by: Roy Luo <royluo@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240913232145.3507723-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: rtk: Clean up error code in __get_dwc3_maximum_speed() 2024-09-13T05:41:12+00:00 Dan Carpenter dan.carpenter@linaro.org 2024-09-12T08:54:09+00:00 e8afd5ace118fe3a508cd6f2aa21e2da150bed48 The __get_dwc3_maximum_speed() function returns an enum type which, in this context here, is basically unsigned int. On error cases, it's supposed to return USB_SPEED_UNKNOWN, but it was accidentally changed to return negative error codes in commit f93e96c544ca ("usb: dwc3: rtk: use scoped device node handling to simplify error paths"). There is only one caller and because of the way that the types work out, returning negative error codes is not a problem. They will be treated as greater than USB_SPEED_HIGH and ignored as invalid. So this patch does not affect run time behavior, it's just a clean up. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/865e56dc-37cc-47b1-8d35-9047ecb1984a@stanley.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The __get_dwc3_maximum_speed() function returns an enum type which, in
this context here, is basically unsigned int.  On error cases, it's
supposed to return USB_SPEED_UNKNOWN, but it was accidentally changed to
return negative error codes in commit f93e96c544ca ("usb: dwc3: rtk: use
scoped device node handling to simplify error paths").

There is only one caller and because of the way that the types work out,
returning negative error codes is not a problem.  They will be treated
as greater than USB_SPEED_HIGH and ignored as invalid.  So this patch
does not affect run time behavior, it's just a clean up.

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/865e56dc-37cc-47b1-8d35-9047ecb1984a@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: imx8mp: disable SS_CON and U3 wakeup for system sleep 2024-09-11T13:37:52+00:00 Li Jun jun.li@nxp.com 2024-09-06T16:30:39+00:00 4664b73859dc2f05c2e178e4ca16362f89cff561 SS_CON and U3 wakeup need 'ref_clk' on. iMX8MP turn off it while system sleep, So disable these wakeup source and only enable DP/DM wakeup source for host mode. Reviewed-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20240906-dwc-mp-v5-3-ea8ec6774e7b@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
SS_CON and U3 wakeup need 'ref_clk' on. iMX8MP turn off it while system
sleep, So disable these wakeup source and only enable DP/DM wakeup source
for host mode.

Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240906-dwc-mp-v5-3-ea8ec6774e7b@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode 2024-09-11T13:37:52+00:00 Frank Li Frank.Li@nxp.com 2024-09-06T16:30:38+00:00 a9400f1979a0820113a7216a69385cad3a9badde Add 2 software manage quirk properties (xhci-missing-cas-quirk and xhci-skip-phy-init-quirk) for xhci host. dwc3 driver have PHY management to cover both device and host mode, so add xhci-skip-phy-init-quirk to skip PHY management from HCD core. Cold Attach Status (CAS) bit can't be set at i.MX8MP after resume from suspend state. So set xhci-missing-cas-quirk. Signed-off-by: Frank Li <Frank.Li@nxp.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240906-dwc-mp-v5-2-ea8ec6774e7b@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add 2 software manage quirk properties (xhci-missing-cas-quirk and
xhci-skip-phy-init-quirk) for xhci host.

dwc3 driver have PHY management to cover both device and host mode, so add
xhci-skip-phy-init-quirk to skip PHY management from HCD core.

Cold Attach Status (CAS) bit can't be set at i.MX8MP after resume from
suspend state. So set xhci-missing-cas-quirk.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240906-dwc-mp-v5-2-ea8ec6774e7b@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge 6.11-rc7 into usb-next 2024-09-09T06:40:22+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2024-09-09T06:40:22+00:00 f299cd11f7539482e87b2d2d527968a26b33f0ec We need the USB fixes in here as well, and this also resolves the merge conflict in: drivers/usb/typec/ucsi/ucsi.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We need the USB fixes in here as well, and this also resolves the merge
conflict in:
	drivers/usb/typec/ucsi/ucsi.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: core: update LC timer as per USB Spec V3.2 2024-09-03T08:03:30+00:00 Faisal Hassan quic_faisalh@quicinc.com 2024-08-29T09:45:02+00:00 9149c9b0c7e046273141e41eebd8a517416144ac This fix addresses STAR 9001285599, which only affects DWC_usb3 version 3.20a. The timer value for PM_LC_TIMER in DWC_usb3 3.20a for the Link ECN changes is incorrect. If the PM TIMER ECN is enabled via GUCTL2[19], the link compliance test (TD7.21) may fail. If the ECN is not enabled (GUCTL2[19] = 0), the controller will use the old timer value (5us), which is still acceptable for the link compliance test. Therefore, clear GUCTL2[19] to pass the USB link compliance test: TD 7.21. Cc: stable@vger.kernel.org Signed-off-by: Faisal Hassan <quic_faisalh@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240829094502.26502-1-quic_faisalh@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This fix addresses STAR 9001285599, which only affects DWC_usb3 version
3.20a. The timer value for PM_LC_TIMER in DWC_usb3 3.20a for the Link
ECN changes is incorrect. If the PM TIMER ECN is enabled via GUCTL2[19],
the link compliance test (TD7.21) may fail. If the ECN is not enabled
(GUCTL2[19] = 0), the controller will use the old timer value (5us),
which is still acceptable for the link compliance test. Therefore, clear
GUCTL2[19] to pass the USB link compliance test: TD 7.21.

Cc: stable@vger.kernel.org
Signed-off-by: Faisal Hassan <quic_faisalh@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240829094502.26502-1-quic_faisalh@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>