linux.git/drivers/usb/dwc3, branch v6.0 Linux kernel source tree usb: dwc3: st: Fix node's child name 2022-09-27T08:50:01+00:00 Patrice Chotard patrice.chotard@foss.st.com 2022-09-26T12:43:59+00:00 f5c5936d6b4dfd3f9a145be5bc6ff27eb706bc39 Update node's child name from "dwc3" to "usb", this fixes the following issue: [3.773852] usb-st-dwc3 8f94000.dwc3: failed to find dwc3 core node Fixes: 3120910a099b ("ARM: dts: stih407-family: Harmonize DWC USB3 DT nodes name") Reported-by: Jerome Audu <jerome.audu@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20220926124359.304770-1-patrice.chotard@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Update node's child name from "dwc3" to "usb", this fixes
the following issue:

[3.773852] usb-st-dwc3 8f94000.dwc3: failed to find dwc3 core node

Fixes: 3120910a099b ("ARM: dts: stih407-family: Harmonize DWC USB3 DT nodes name")
Reported-by: Jerome Audu <jerome.audu@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20220926124359.304770-1-patrice.chotard@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: core: leave default DMA if the controller does not support 64-bit DMA 2022-09-07T14:30:35+00:00 William Wu william.wu@rock-chips.com 2022-09-01T08:34:46+00:00 91062e663b261815573ce00967b1895a99e668df On some DWC3 controllers (e.g. Rockchip SoCs), the DWC3 core doesn't support 64-bit DMA address width. In this case, this driver should use the default 32-bit mask. Otherwise, the DWC3 controller will break if it runs on above 4GB physical memory environment. This patch reads the DWC_USB3_AWIDTH bits of GHWPARAMS0 which used for the DMA address width, and only configure 64-bit DMA mask if the DWC_USB3_AWIDTH is 64. Fixes: 45d39448b4d0 ("usb: dwc3: support 64 bit DMA in platform driver") Cc: stable <stable@kernel.org> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: William Wu <william.wu@rock-chips.com> Link: https://lore.kernel.org/r/20220901083446.3799754-1-william.wu@rock-chips.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
On some DWC3 controllers (e.g. Rockchip SoCs), the DWC3 core
doesn't support 64-bit DMA address width. In this case, this
driver should use the default 32-bit mask. Otherwise, the DWC3
controller will break if it runs on above 4GB physical memory
environment.

This patch reads the DWC_USB3_AWIDTH bits of GHWPARAMS0 which
used for the DMA address width, and only configure 64-bit DMA
mask if the DWC_USB3_AWIDTH is 64.

Fixes: 45d39448b4d0 ("usb: dwc3: support 64 bit DMA in platform driver")
Cc: stable <stable@kernel.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: William Wu <william.wu@rock-chips.com>
Link: https://lore.kernel.org/r/20220901083446.3799754-1-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: disable USB core PHY management 2022-08-30T13:30:21+00:00 Johan Hovold johan+linaro@kernel.org 2022-08-25T13:18:36+00:00 6000b8d900cd5f52fbcd0776d0cc396e88c8c2ea The dwc3 driver manages its PHYs itself so the USB core PHY management needs to be disabled. Use the struct xhci_plat_priv hack added by commits 46034a999c07 ("usb: host: xhci-plat: add platform data support") and f768e718911e ("usb: host: xhci-plat: add priv quirk for skip PHY initialization") to propagate the setting for now. Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") Fixes: 178a0bce05cb ("usb: core: hcd: integrate the PHY wrapper into the HCD core") Tested-by: Matthias Kaehlcke <mka@chromium.org> Cc: stable <stable@kernel.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220825131836.19769-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The dwc3 driver manages its PHYs itself so the USB core PHY management
needs to be disabled.

Use the struct xhci_plat_priv hack added by commits 46034a999c07 ("usb:
host: xhci-plat: add platform data support") and f768e718911e ("usb:
host: xhci-plat: add priv quirk for skip PHY initialization") to
propagate the setting for now.

Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd")
Fixes: 178a0bce05cb ("usb: core: hcd: integrate the PHY wrapper into the HCD core")
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Cc: stable <stable@kernel.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220825131836.19769-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: qcom: suppress unused-variable warning 2022-08-23T06:40:28+00:00 Johan Hovold johan+linaro@kernel.org 2022-08-22T10:05:50+00:00 e41a88f38d87f730647bb14df9211d32241d1176 The dwc3_qcom_read_usb2_speed() helper is now only called when the controller is acting as host, but the compiler will warn that the hcd variable is unused in gadget-only W=1 builds. Fixes: c06795f114a6 ("usb: dwc3: qcom: fix gadget-only builds") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220822100550.3039-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The dwc3_qcom_read_usb2_speed() helper is now only called when the
controller is acting as host, but the compiler will warn that the hcd
variable is unused in gadget-only W=1 builds.

Fixes: c06795f114a6 ("usb: dwc3: qcom: fix gadget-only builds")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220822100550.3039-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop 2022-08-18T19:10:44+00:00 Wesley Cheng quic_wcheng@quicinc.com 2022-07-28T02:06:47+00:00 040f2dbd2010c43f33ad27249e6dac48456f4d99 Relocate the pullups_connected check until after it is ensured that there are no runtime PM transitions. If another context triggered the DWC3 core's runtime resume, it may have already enabled the Run/Stop. Do not re-run the entire pullup sequence again, as it may issue a core soft reset while Run/Stop is already set. This patch depends on commit 69e131d1ac4e ("usb: dwc3: gadget: Prevent repeat pullup()") Fixes: 77adb8bdf422 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded") Cc: stable <stable@kernel.org> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20220728020647.9377-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Relocate the pullups_connected check until after it is ensured that there
are no runtime PM transitions.  If another context triggered the DWC3
core's runtime resume, it may have already enabled the Run/Stop.  Do not
re-run the entire pullup sequence again, as it may issue a core soft
reset while Run/Stop is already set.

This patch depends on
  commit 69e131d1ac4e ("usb: dwc3: gadget: Prevent repeat pullup()")

Fixes: 77adb8bdf422 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded")
Cc: stable <stable@kernel.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220728020647.9377-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: pci: Add support for Intel Raptor Lake 2022-08-18T19:10:34+00:00 Heikki Krogerus heikki.krogerus@linux.intel.com 2022-08-15T12:33:34+00:00 bad0d1d726ace2db9e0f39c62b173bc7cc43dd6a This adds the necessary PCI device ID for the controller inside the Intel Raptor Lake CPU block. The controllers that are part of the PCH (chipset) have separate device IDs. Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220815123334.87526-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This adds the necessary PCI device ID for the controller
inside the Intel Raptor Lake CPU block. The controllers that
are part of the PCH (chipset) have separate device IDs.

Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220815123334.87526-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: qcom: clean up suspend callbacks 2022-08-18T17:33:40+00:00 Johan Hovold johan+linaro@kernel.org 2022-08-04T15:10:01+00:00 ac6928f83f8da73eee254606b45eacc6b743518a Clean up the suspend callbacks by separating the error and success paths to improve readability. Also drop a related redundant initialisation. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-10-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Clean up the suspend callbacks by separating the error and success paths
to improve readability.

Also drop a related redundant initialisation.

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220804151001.23612-10-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: qcom: fix wakeup implementation 2022-08-18T17:33:40+00:00 Johan Hovold johan+linaro@kernel.org 2022-08-04T15:10:00+00:00 e3fafbd8e36530eb015a1bb31273bcf7f7035422 It is the Qualcomm glue wakeup interrupts that may be able to wake the system from suspend and this can now be described in the devicetree. Move the wakeup-source property handling over from the core driver and instead propagate the capability setting to the core device during probe. This is needed as there is currently no way for the core driver to query the wakeup setting of the glue device, but it is the core driver that manages the PHY power state during suspend. Also don't leave the PHYs enabled when system wakeup has been disabled through sysfs. Fixes: 649f5c842ba3 ("usb: dwc3: core: Host wake up support from system suspend") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-9-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
It is the Qualcomm glue wakeup interrupts that may be able to wake the
system from suspend and this can now be described in the devicetree.

Move the wakeup-source property handling over from the core driver and
instead propagate the capability setting to the core device during
probe.

This is needed as there is currently no way for the core driver to query
the wakeup setting of the glue device, but it is the core driver that
manages the PHY power state during suspend.

Also don't leave the PHYs enabled when system wakeup has been disabled
through sysfs.

Fixes: 649f5c842ba3 ("usb: dwc3: core: Host wake up support from system suspend")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220804151001.23612-9-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: qcom: fix peripheral and OTG suspend 2022-08-18T17:33:40+00:00 Johan Hovold johan+linaro@kernel.org 2022-08-04T15:09:58+00:00 c5f14abeb52b0177b940fd734133d383da3521d8 A recent commit implementing wakeup support in host mode instead broke suspend for peripheral and OTG mode. The hack that was added in the suspend path to determine the speed of any device connected to the USB2 bus not only accesses internal driver data for a child device, but also dereferences a NULL pointer or accesses freed data when the controller is not acting as host. There's no quick fix to the layering violation, but since reverting would leave us with broken suspend in host mode with wakeup triggering immediately, let's keep the hack for now. Fix the immediate issues by only checking the host bus speed and enabling wakeup interrupts when acting as host. Fixes: 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-7-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
A recent commit implementing wakeup support in host mode instead broke
suspend for peripheral and OTG mode.

The hack that was added in the suspend path to determine the speed of
any device connected to the USB2 bus not only accesses internal driver
data for a child device, but also dereferences a NULL pointer or
accesses freed data when the controller is not acting as host.

There's no quick fix to the layering violation, but since reverting
would leave us with broken suspend in host mode with wakeup triggering
immediately, let's keep the hack for now.

Fix the immediate issues by only checking the host bus speed and
enabling wakeup interrupts when acting as host.

Fixes: 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220804151001.23612-7-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: qcom: fix runtime PM wakeup 2022-08-18T17:33:40+00:00 Johan Hovold johan+linaro@kernel.org 2022-08-04T15:09:57+00:00 6498a96c8c9ce8ae4078e586a607851491e29a33 A device must enable wakeups during runtime suspend regardless of whether it is capable and allowed to wake the system up from system suspend. Fixes: 2664deb09306 ("usb: dwc3: qcom: Honor wakeup enabled/disabled state") Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-6-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
A device must enable wakeups during runtime suspend regardless of
whether it is capable and allowed to wake the system up from system
suspend.

Fixes: 2664deb09306 ("usb: dwc3: qcom: Honor wakeup enabled/disabled state")
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220804151001.23612-6-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>