linux.git/drivers/usb/dwc3, branch v5.13

usb: dwc3: core: fix kernel panic when do reboot

2021-06-15T10:20:26+00:00

When do system reboot, it calls dwc3_shutdown and the whole debugfs
for dwc3 has removed first, when the gadget tries to do deinit, and
remove debugfs for its endpoints, it meets NULL pointer dereference
issue when call debugfs_lookup. Fix it by removing the whole dwc3
debugfs later than dwc3_drd_exit.

[ 2924.958838] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000002
....
[ 2925.030994] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 2925.037005] pc : inode_permission+0x2c/0x198
[ 2925.041281] lr : lookup_one_len_common+0xb0/0xf8
[ 2925.045903] sp : ffff80001276ba70
[ 2925.049218] x29: ffff80001276ba70 x28: ffff0000c01f0000 x27: 0000000000000000
[ 2925.056364] x26: ffff800011791e70 x25: 0000000000000008 x24: dead000000000100
[ 2925.063510] x23: dead000000000122 x22: 0000000000000000 x21: 0000000000000001
[ 2925.070652] x20: ffff8000122c6188 x19: 0000000000000000 x18: 0000000000000000
[ 2925.077797] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000004
[ 2925.084943] x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000000000030
[ 2925.092087] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : ffff8000102b2420
[ 2925.099232] x8 : 7f7f7f7f7f7f7f7f x7 : feff73746e2f6f64 x6 : 0000000000008080
[ 2925.106378] x5 : 61c8864680b583eb x4 : 209e6ec2d263dbb7 x3 : 000074756f307065
[ 2925.113523] x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff8000122c6188
[ 2925.120671] Call trace:
[ 2925.123119]  inode_permission+0x2c/0x198
[ 2925.127042]  lookup_one_len_common+0xb0/0xf8
[ 2925.131315]  lookup_one_len_unlocked+0x34/0xb0
[ 2925.135764]  lookup_positive_unlocked+0x14/0x50
[ 2925.140296]  debugfs_lookup+0x68/0xa0
[ 2925.143964]  dwc3_gadget_free_endpoints+0x84/0xb0
[ 2925.148675]  dwc3_gadget_exit+0x28/0x78
[ 2925.152518]  dwc3_drd_exit+0x100/0x1f8
[ 2925.156267]  dwc3_remove+0x11c/0x120
[ 2925.159851]  dwc3_shutdown+0x14/0x20
[ 2925.163432]  platform_shutdown+0x28/0x38
[ 2925.167360]  device_shutdown+0x15c/0x378
[ 2925.171291]  kernel_restart_prepare+0x3c/0x48
[ 2925.175650]  kernel_restart+0x1c/0x68
[ 2925.179316]  __do_sys_reboot+0x218/0x240
[ 2925.183247]  __arm64_sys_reboot+0x28/0x30
[ 2925.187262]  invoke_syscall+0x48/0x100
[ 2925.191017]  el0_svc_common.constprop.0+0x48/0xc8
[ 2925.195726]  do_el0_svc+0x28/0x88
[ 2925.199045]  el0_svc+0x20/0x30
[ 2925.202104]  el0_sync_handler+0xa8/0xb0
[ 2925.205942]  el0_sync+0x148/0x180
[ 2925.209270] Code: a9025bf5 2a0203f5 121f0056 370802b5 (79400660)
[ 2925.215372] ---[ end trace 124254d8e485a58b ]---
[ 2925.220012] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 2925.227676] Kernel Offset: disabled
[ 2925.231164] CPU features: 0x00001001,20000846
[ 2925.235521] Memory Limit: none
[ 2925.238580] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---

Fixes: 8d396bb0a5b6 ("usb: dwc3: debugfs: Add and remove endpoint dirs dynamically")
Cc: Jack Pham 
Tested-by: Jack Pham 
Signed-off-by: Peter Chen 
Link: https://lore.kernel.org/r/20210608105656.10795-1-peter.chen@kernel.org
(cherry picked from commit 2a042767814bd0edf2619f06fecd374e266ea068)
Link: https://lore.kernel.org/r/20210615080847.GA10432@jackp-linux.qualcomm.com
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: ep0: fix NULL pointer exception

2021-06-09T09:03:32+00:00

There is no validation of the index from dwc3_wIndex_to_dep() and we might
be referring a non-existing ep and trigger a NULL pointer exception. In
certain configurations we might use fewer eps and the index might wrongly
indicate a larger ep index than existing.

By adding this validation from the patch we can actually report a wrong
index back to the caller.

In our usecase we are using a composite device on an older kernel, but
upstream might use this fix also. Unfortunately, I cannot describe the
hardware for others to reproduce the issue as it is a proprietary
implementation.

[   82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4
[   82.966891] Mem abort info:
[   82.969663]   ESR = 0x96000006
[   82.972703]   Exception class = DABT (current EL), IL = 32 bits
[   82.978603]   SET = 0, FnV = 0
[   82.981642]   EA = 0, S1PTW = 0
[   82.984765] Data abort info:
[   82.987631]   ISV = 0, ISS = 0x00000006
[   82.991449]   CM = 0, WnR = 0
[   82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc
[   83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000
[   83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[   83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c)
[   83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1
[   83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO)
[   83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c
[   83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94

...

[   83.141788] Call trace:
[   83.144227]  dwc3_ep0_handle_feature+0x414/0x43c
[   83.148823]  dwc3_ep0_interrupt+0x3b4/0xc94
[   83.181546] ---[ end trace aac6b5267d84c32f ]---

Signed-off-by: Marian-Cristian Rotariu 
Cc: stable 
Link: https://lore.kernel.org/r/20210608162650.58426-1-marian.c.rotariu@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled

2021-06-04T10:58:55+00:00

When only PHY1 is used (for example on Odroid-HC4), the regmap init code
uses the usb2 ports when doesn't initialize the PHY1 regmap entry.

This fixes:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
pc : regmap_update_bits_base+0x40/0xa0
lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8
...
Call trace:
regmap_update_bits_base+0x40/0xa0
dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8
dwc3_meson_g12a_usb2_init+0x7c/0xc8
dwc3_meson_g12a_usb_init+0x28/0x48
dwc3_meson_g12a_probe+0x298/0x540
platform_probe+0x70/0xe0
really_probe+0xf0/0x4d8
driver_probe_device+0xfc/0x168
...

Fixes: 013af227f58a97 ("usb: dwc3: meson-g12a: handle the phy and glue registers separately")
Reviewed-by: Martin Blumenstingl 
Signed-off-by: Neil Armstrong 
Cc: stable 
Link: https://lore.kernel.org/r/20210601084830.260196-1-narmstrong@baylibre.com
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: meson-g12a: Disable the regulator in the error handling path of the probe

2021-06-04T10:55:27+00:00

If an error occurs after a successful 'regulator_enable()' call,
'regulator_disable()' must be called.

Fix the error handling path of the probe accordingly.

The remove function doesn't need to be fixed, because the
'regulator_disable()' call is already hidden in 'dwc3_meson_g12a_suspend()'
which is called via 'pm_runtime_set_suspended()' in the remove function.

Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Reviewed-by: Martin Blumenstingl 
Acked-by: Neil Armstrong 
Signed-off-by: Christophe JAILLET 
Link: https://lore.kernel.org/r/79df054046224bbb0716a8c5c2082650290eec86.1621616013.git.christophe.jaillet@wanadoo.fr
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

Revert "usb: dwc3: core: Add shutdown callback for dwc3"

2021-06-04T08:40:57+00:00

This reverts commit 568262bf5492a9bb2fcc4c204b8d38fd6be64e28.

The commit causes the following panic when shutting down a rockpro64-v2
board:

[..]
[   41.684569] xhci-hcd xhci-hcd.2.auto: USB bus 1 deregistered
[   41.686301] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0
[   41.687096] Mem abort info:
[   41.687345]   ESR = 0x96000004
[   41.687615]   EC = 0x25: DABT (current EL), IL = 32 bits
[   41.688082]   SET = 0, FnV = 0
[   41.688352]   EA = 0, S1PTW = 0
[   41.688628] Data abort info:
[   41.688882]   ISV = 0, ISS = 0x00000004
[   41.689219]   CM = 0, WnR = 0
[   41.689481] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000073b2000
[   41.690046] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000
[   41.690654] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[   41.691143] Modules linked in:
[   41.691416] CPU: 5 PID: 1 Comm: shutdown Not tainted 5.13.0-rc4 #43
[   41.691966] Hardware name: Pine64 RockPro64 v2.0 (DT)
[   41.692409] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[   41.692937] pc : down_read_interruptible+0xec/0x200
[   41.693373] lr : simple_recursive_removal+0x48/0x280
[   41.693815] sp : ffff800011fab910
[   41.694107] x29: ffff800011fab910 x28: ffff0000008fe480 x27: ffff0000008fe4d8
[   41.694736] x26: ffff800011529a90 x25: 00000000000000a0 x24: ffff800011edd030
[   41.695364] x23: 0000000000000080 x22: 0000000000000000 x21: ffff800011f23994
[   41.695992] x20: ffff800011f23998 x19: ffff0000008fe480 x18: ffffffffffffffff
[   41.696620] x17: 000c0400bb44ffff x16: 0000000000000009 x15: ffff800091faba3d
[   41.697248] x14: 0000000000000004 x13: 0000000000000000 x12: 0000000000000020
[   41.697875] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : 6f6c746364716e62
[   41.698502] x8 : 7f7f7f7f7f7f7f7f x7 : fefefeff6364626d x6 : 0000000000000440
[   41.699130] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000000a0
[   41.699758] x2 : 0000000000000001 x1 : 0000000000000000 x0 : 00000000000000a0
[   41.700386] Call trace:
[   41.700602]  down_read_interruptible+0xec/0x200
[   41.701003]  debugfs_remove+0x5c/0x80
[   41.701328]  dwc3_debugfs_exit+0x1c/0x6c
[   41.701676]  dwc3_remove+0x34/0x1a0
[   41.701988]  platform_remove+0x28/0x60
[   41.702322]  __device_release_driver+0x188/0x22c
[   41.702730]  device_release_driver+0x2c/0x44
[   41.703106]  bus_remove_device+0x124/0x130
[   41.703468]  device_del+0x16c/0x424
[   41.703777]  platform_device_del.part.0+0x1c/0x90
[   41.704193]  platform_device_unregister+0x28/0x44
[   41.704608]  of_platform_device_destroy+0xe8/0x100
[   41.705031]  device_for_each_child_reverse+0x64/0xb4
[   41.705470]  of_platform_depopulate+0x40/0x84
[   41.705853]  __dwc3_of_simple_teardown+0x20/0xd4
[   41.706260]  dwc3_of_simple_shutdown+0x14/0x20
[   41.706652]  platform_shutdown+0x28/0x40
[   41.706998]  device_shutdown+0x158/0x330
[   41.707344]  kernel_power_off+0x38/0x7c
[   41.707684]  __do_sys_reboot+0x16c/0x2a0
[   41.708029]  __arm64_sys_reboot+0x28/0x34
[   41.708383]  invoke_syscall+0x48/0x114
[   41.708716]  el0_svc_common.constprop.0+0x44/0xdc
[   41.709131]  do_el0_svc+0x28/0x90
[   41.709426]  el0_svc+0x2c/0x54
[   41.709698]  el0_sync_handler+0xa4/0x130
[   41.710045]  el0_sync+0x198/0x1c0
[   41.710342] Code: c8047c62 35ffff84 17fffe5f f9800071 (c85ffc60)
[   41.710881] ---[ end trace 406377df5178f75c ]---
[   41.711299] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[   41.712084] Kernel Offset: disabled
[   41.712391] CPU features: 0x10001031,20000846
[   41.712775] Memory Limit: none
[   41.713049] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---

As Felipe explained: "dwc3_shutdown() is just called dwc3_remove()
directly, then we end up calling debugfs_remove_recursive() twice."

Reverting the commit fixes the panic.

Fixes: 568262bf5492 ("usb: dwc3: core: Add shutdown callback for dwc3")
Acked-by: Felipe Balbi 
Signed-off-by: Alexandru Elisei 
Link: https://lore.kernel.org/r/20210603151742.298243-1-alexandru.elisei@arm.com
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: debugfs: Add and remove endpoint dirs dynamically

2021-06-03T18:28:23+00:00

The DWC3 DebugFS directory and files are currently created once
during probe.  This includes creation of subdirectories for each
of the gadget's endpoints.  This works fine for peripheral-only
controllers, as dwc3_core_init_mode() calls dwc3_gadget_init()
just prior to calling dwc3_debugfs_init().

However, for dual-role controllers, dwc3_core_init_mode() will
instead call dwc3_drd_init() which is problematic in a few ways.
First, the initial state must be determined, then dwc3_set_mode()
will have to schedule drd_work and by then dwc3_debugfs_init()
could have already been invoked.  Even if the initial mode is
peripheral, dwc3_gadget_init() happens after the DebugFS files
are created, and worse so if the initial state is host and the
controller switches to peripheral much later.  And secondly,
even if the gadget endpoints' debug entries were successfully
created, if the controller exits peripheral mode, its dwc3_eps
are freed so the debug files would now hold stale references.

So it is best if the DebugFS endpoint entries are created and
removed dynamically at the same time the underlying dwc3_eps are.
Do this by calling dwc3_debugfs_create_endpoint_dir() as each
endpoint is created, and conversely remove the DebugFS entry when
the endpoint is freed.

Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly")
Cc: stable 
Reviewed-by: Peter Chen 
Signed-off-by: Jack Pham 
Link: https://lore.kernel.org/r/20210529192932.22912-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULL

2021-06-02T14:50:54+00:00

There exists a possible scenario in which dwc3_gadget_init() can fail:
during during host -> peripheral mode switch in dwc3_set_mode(), and
a pending gadget driver fails to bind.  Then, if the DRD undergoes
another mode switch from peripheral->host the resulting
dwc3_gadget_exit() will attempt to reference an invalid and dangling
dwc->gadget pointer as well as call dma_free_coherent() on unmapped
DMA pointers.

The exact scenario can be reproduced as follows:
 - Start DWC3 in peripheral mode
 - Configure ConfigFS gadget with FunctionFS instance (or use g_ffs)
 - Run FunctionFS userspace application (open EPs, write descriptors, etc)
 - Bind gadget driver to DWC3's UDC
 - Switch DWC3 to host mode
   => dwc3_gadget_exit() is called. usb_del_gadget() will put the
	ConfigFS driver instance on the gadget_driver_pending_list
 - Stop FunctionFS application (closes the ep files)
 - Switch DWC3 to peripheral mode
   => dwc3_gadget_init() fails as usb_add_gadget() calls
	check_pending_gadget_drivers() and attempts to rebind the UDC
	to the ConfigFS gadget but fails with -19 (-ENODEV) because the
	FFS instance is not in FFS_ACTIVE state (userspace has not
	re-opened and written the descriptors yet, i.e. desc_ready!=0).
 - Switch DWC3 back to host mode
   => dwc3_gadget_exit() is called again, but this time dwc->gadget
	is invalid.

Although it can be argued that userspace should take responsibility
for ensuring that the FunctionFS application be ready prior to
allowing the composite driver bind to the UDC, failure to do so
should not result in a panic from the kernel driver.

Fix this by setting dwc->gadget to NULL in the failure path of
dwc3_gadget_init() and add a check to dwc3_gadget_exit() to bail out
unless the gadget pointer is valid.

Fixes: e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically")
Cc: 
Reviewed-by: Peter Chen 
Signed-off-by: Jack Pham 
Link: https://lore.kernel.org/r/20210528160405.17550-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: Disable gadget IRQ during pullup disable

2021-06-02T14:47:08+00:00

Current sequence utilizes dwc3_gadget_disable_irq() alongside
synchronize_irq() to ensure that no further DWC3 events are generated.
However, the dwc3_gadget_disable_irq() API only disables device
specific events.  Endpoint events can still be generated.  Briefly
disable the interrupt line, so that the cleanup code can run to
prevent device and endpoint events. (i.e. __dwc3_gadget_stop() and
dwc3_stop_active_transfers() respectively)

Without doing so, it can lead to both the interrupt handler and the
pullup disable routine both writing to the GEVNTCOUNT register, which
will cause an incorrect count being read from future interrupts.

Fixes: ae7e86108b12 ("usb: dwc3: Stop active transfers before halting the controller")
Signed-off-by: Wesley Cheng 
Link: https://lore.kernel.org/r/1621571037-1424-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: Properly track pending and queued SG

2021-05-21T12:25:07+00:00

The driver incorrectly uses req->num_pending_sgs to track both the
number of pending and queued SG entries. It only prepares the next
request if the previous is done, and it doesn't update num_pending_sgs
until there is TRB completion interrupt. This may starve the controller
of more TRBs until the num_pending_sgs is decremented.

Fix this by decrementing the num_pending_sgs after they are queued and
properly track both num_mapped_sgs and num_queued_sgs.

Fixes: c96e6725db9d ("usb: dwc3: gadget: Correct the logic for queuing sgs")
Cc: 
Reported-by: Michael Grzeschik 
Tested-by: Michael Grzeschik 
Acked-by: Felipe Balbi 
Signed-off-by: Thinh Nguyen 
Link: https://lore.kernel.org/r/ba24591dbcaad8f244a3e88bd449bb7205a5aec3.1620874069.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: omap: improve extcon initialization

2021-05-10T13:04:37+00:00

When extcon is used in combination with dwc3, it is assumed that the dwc3
registers are untouched and as such are only configured if VBUS is valid
or ID is tied to ground.

In case VBUS is not valid or ID is floating, the registers are not
configured as such during driver initialization, causing a wrong
default state during boot.

If the registers are not in a default state, because they are for
instance touched by a boot loader, this can cause for a kernel error.

Signed-off-by: Marcel Hamer 
Link: https://lore.kernel.org/r/20210427122118.1948340-1-marcel@solidxs.se
Cc: stable 
Signed-off-by: Greg Kroah-Hartman