linux.git/drivers/usb/core, branch v4.19-rc2

Merge tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2018-08-18T17:21:49+00:00

Pull USB/PHY updates from Greg KH:
 "Here is the big USB and phy driver patch set for 4.19-rc1.

  Nothing huge but there was a lot of work that happened this
  development cycle:

   - lots of type-c work, with drivers graduating out of staging, and
     displayport support being added.

   - new PHY drivers

   - the normal collection of gadget driver updates and fixes

   - code churn to work on the urb handling path, using irqsave()
     everywhere in anticipation of making this codepath a lot simpler in
     the future.

   - usbserial driver fixes and reworks

   - other misc changes

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
  USB: serial: pl2303: add a new device id for ATEN
  usb: renesas_usbhs: Kconfig: convert to SPDX identifiers
  usb: dwc3: gadget: Check MaxPacketSize from descriptor
  usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms
  usb: dwc2: Turn on uframe_sched on "amlogic" platforms
  usb: dwc2: Turn on uframe_sched on "his" platforms
  usb: dwc2: Turn on uframe_sched on "bcm" platforms
  usb: dwc2: gadget: ISOC's starting flow improvement
  usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.
  usb: dwc3: core: Enable AutoRetry feature in the controller
  usb: dwc3: Set default mode for dwc_usb31
  usb: gadget: udc: renesas_usb3: Add register of usb role switch
  usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep
  usb: dwc2: Modify dwc2_readl/writel functions prototype
  usb: dwc3: pci: Intel Merrifield can be host
  usb: dwc3: pci: Supply device properties via driver data
  arm64: dts: dwc3: description of incr burst type
  usb: dwc3: Enable undefined length INCR burst type
  usb: dwc3: add global soc bus configuration reg0
  usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci
  ...

Merge tag 'leds-for-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

2018-08-14T20:07:22+00:00

Pull LED updates from Jacek Anaszewski:
 "LED triggers improvements make the biggest part of this pull request.
  The most striking ones, that allowed for nice cleanups in the triggers
  are:

   - centralized handling of creation and removal of trigger sysfs
     attributes via attribute group

   - addition of module_led_trigger() helper

  The other things that need to be mentioned:

  New features and improvements to existing LED class drivers:

   - lt3593: add DT support, switch to gpiod interface

   - lm3692x: support LED sync configuration, change OF calls to fwnode
     calls

   - apu: modify PC Engines apu/apu2 driver to support apu3

  Change in the drivers/net/can/led.c:

   - mark led trigger as broken since it's in the way for the further
     cleanups. It implements a subset of the netdev trigger and an Ack
     is needed from someone who can actually test and confirm that the
     netdev trigger works for can devices"

* tag 'leds-for-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (32 commits)
  leds: ns2: Change unsigned to unsigned int
  usb: simplify usbport trigger
  leds: gpio trigger: simplifications from core changes
  leds: backlight trigger: simplifications from core changes
  leds: activity trigger: simplifications from core changes
  leds: default-on trigger: make use of module_led_trigger()
  leds: heartbeat trigger: simplifications from core changes
  leds: oneshot trigger: simplifications from core changes
  leds: transient trigger: simplifications from core changes
  leds: timer trigger: simplifications from core changes
  leds: netdev trigger: simplifications from core changes
  leds: triggers: new function led_set_trigger_data()
  leds: triggers: define module_led_trigger helper
  leds: triggers: handle .trigger_data and .activated() in the core
  leds: triggers: add device attribute support
  leds: triggers: let struct led_trigger::activate() return an error code
  leds: triggers: make the MODULE_LICENSE string match the actual license
  leds: lm3692x: Support LED sync configuration
  dt: bindings: lm3692x: Update binding for LED sync control
  leds: lm3692x: Change DT calls to fwnode calls
  ...

Merge 4.18-rc7 into usb-next

2018-07-30T08:04:58+00:00

We want the USB fixes in here as well to handle merge issues.

Signed-off-by: Greg Kroah-Hartman

usb: core: handle hub C_PORT_OVER_CURRENT condition

2018-07-21T06:38:29+00:00

Based on USB2.0 Spec Section 11.12.5,

  "If a hub has per-port power switching and per-port current limiting,
  an over-current on one port may still cause the power on another port
  to fall below specific minimums. In this case, the affected port is
  placed in the Power-Off state and C_PORT_OVER_CURRENT is set for the
  port, but PORT_OVER_CURRENT is not set."

so let's check C_PORT_OVER_CURRENT too for over current condition.

Fixes: 08d1dec6f405 ("usb:hub set hub->change_bits when over-current happens")
Cc: 
Tested-by: Alessandro Antenucci 
Signed-off-by: Bin Liu 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

Merge 4.18-rc5 into usb-next

2018-07-16T07:09:24+00:00

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman

usb: quirks: add delay quirks for Corsair Strafe

2018-07-06T14:28:31+00:00

Corsair Strafe appears to suffer from the same issues
as the Corsair Strafe RGB.
Apply the same quirks (control message delay and init delay)
that the RGB version has to 1b1c:1b15.

With these quirks in place the keyboard works correctly upon
booting the system, and no longer requires reattaching the device.

Signed-off-by: Nico Sneck 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

usb: simplify usbport trigger

2018-07-05T21:21:15+00:00

The led trigger core learned a few things that allow to simplify the
trigger drivers.  Make use of automated trigger attributes and error
checking of the activate callback. Also use the wrappers to set and get
trigger_data.

Acked-by: Pavel Machek 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Jacek Anaszewski

leds: triggers: let struct led_trigger::activate() return an error code

2018-07-05T21:21:10+00:00

Given that activating a trigger can fail, let the callback return an
indication. This prevents to have a trigger active according to the
"trigger" sysfs attribute but not functional.

All users are changed accordingly to return 0 for now. There is no intended
change in behaviour.

Signed-off-by: Uwe Kleine-König 
Acked-by: Pavel Machek 
Signed-off-by: Jacek Anaszewski

usb: usbfs: use irqsave() in USB's complete callback

2018-06-28T10:36:06+00:00

The USB completion callback does not disable interrupts while acquiring
the lock. We want to remove the local_irq_disable() invocation from
__usb_hcd_giveback_urb() and therefore it is required for the callback
handler to disable the interrupts while acquiring the lock.
The callback may be invoked either in IRQ or BH context depending on the
USB host controller.
Use the _irqsave() variant of the locking primitives.

Signed-off-by: Sebastian Andrzej Siewior 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

usb: core: use irqsave() in sg_complete() complete callback

2018-06-28T10:36:06+00:00

The USB completion callback does not disable interrupts while acquiring
the lock. We want to remove the local_irq_disable() invocation from
__usb_hcd_giveback_urb() and therefore it is required for the callback
handler to disable the interrupts while acquiring the lock.
The callback may be invoked either in IRQ or BH context depending on the
USB host controller.
Use the _irqsave() variant of the locking primitives.

Signed-off-by: Sebastian Andrzej Siewior 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman