linux.git/drivers/usb/core, branch v3.12-rc2 Linux kernel source tree usbcore: fix incorrect type in assignment in descriptors_changed() 2013-08-31T01:50:43+00:00 Xenia Ragiadakou burzalodowa@gmail.com 2013-08-31T01:40:49+00:00 b9a1048137f4ae43ee90f61a3f34f0efe863cfeb This patch fixes the incorrect assignment of a variable with type 'le16' to a variable with type 'unsigned int'. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch fixes the incorrect assignment of a variable with type 'le16'
to a variable with type 'unsigned int'.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbcore: compare and release one bos descriptor in usb_reset_and_verify_device() 2013-08-30T19:02:08+00:00 Xenia Ragiadakou burzalodowa@gmail.com 2013-08-29T18:45:48+00:00 e3376d6c87eea09bd65ece6073f6e5d47aa560a3 In usb_reset_and_verify_device(), hub_port_init() allocates a new bos descriptor to hold the value read by the device. The new bos descriptor has to be compared with the old one in order to figure out if device 's firmware has changed in which case the device has to be reenumerated. In the original code, none of the two descriptors was deallocated leading to memory leaks. This patch compares the old bos descriptor with the new one to detect change in firmware and releases the newly allocated bos descriptor to prevent memory leak. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Reported-by: Martin MOKREJS <mmokrejs@gmail.com> Tested-by: Martin MOKREJS <mmokrejs@gmail.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
In usb_reset_and_verify_device(), hub_port_init() allocates a new bos
descriptor to hold the value read by the device. The new bos descriptor
has to be compared with the old one in order to figure out if device 's
firmware has changed in which case the device has to be reenumerated.
In the original code, none of the two descriptors was deallocated leading
to memory leaks.

This patch compares the old bos descriptor with the new one to detect change
in firmware and releases the newly allocated bos descriptor to prevent memory
leak.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reported-by: Martin MOKREJS <mmokrejs@gmail.com>
Tested-by: Martin MOKREJS <mmokrejs@gmail.com>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: core: be specific about attribute permissions 2013-08-25T22:12:03+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2013-08-23T23:05:26+00:00 d03f254f2ee2a708af9a7347402d9aed7f6cc4c1 Instead of having to audit all sysfs attributes, to ensure we get them right, use the default macros the driver core provides us (read-only, read-write) to make the code simpler, and to prevent any mistakes from ever happening. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Instead of having to audit all sysfs attributes, to ensure we get them
right, use the default macros the driver core provides us (read-only,
read-write) to make the code simpler, and to prevent any mistakes from
ever happening.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: core: use DRIVER_ATTR_RW() 2013-08-23T22:12:14+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2013-08-23T22:12:14+00:00 598d03610a0169eb88d2b08d6743be31b3b9c258 Use DRIVER_ATTR_RW() to make it easier to audit sysfs file permissions. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Use DRIVER_ATTR_RW() to make it easier to audit sysfs file permissions.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: don't use bNbrPorts after initialization 2013-08-23T17:47:17+00:00 Krzysztof Mazur krzysiek@podlesie.net 2013-08-22T12:49:40+00:00 3bbc47d8b07abad56780a8e214520259808c4f8b After successful initialization hub->descriptor->bNbrPorts and hub->hdev->maxchild are equal, but using hub->hdev->maxchild is preferred because that value is explicitly used for initialization of hub->ports[]. Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
After successful initialization hub->descriptor->bNbrPorts and
hub->hdev->maxchild are equal, but using hub->hdev->maxchild is
preferred because that value is explicitly used for initialization
of hub->ports[].

Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: fail on usb_hub_create_port_device() errors 2013-08-23T17:47:17+00:00 Krzysztof Mazur krzysiek@podlesie.net 2013-08-22T12:49:39+00:00 e58547eb9561a8a72d46e2d411090a614d33ac0e Ignoring usb_hub_create_port_device() errors cause later NULL pointer deference when uninitialized hub->ports[i] entries are dereferenced after port memory allocation error. Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Ignoring usb_hub_create_port_device() errors cause later NULL pointer
deference when uninitialized hub->ports[i] entries are dereferenced
after port memory allocation error.

Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: fix cleanup after failure in hub_configure() 2013-08-23T17:46:03+00:00 Krzysztof Mazur krzysiek@podlesie.net 2013-08-22T12:49:38+00:00 d0308d4b6b02597f39fc31a9bddf7bb3faad5622 If the hub_configure() fails after setting the hdev->maxchild the hub->ports might be NULL or point to uninitialized kzallocated memory causing NULL pointer dereference in hub_quiesce() during cleanup. Now after such error the hdev->maxchild is set to 0 to avoid cleanup of uninitialized ports. Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
If the hub_configure() fails after setting the hdev->maxchild
the hub->ports might be NULL or point to uninitialized kzallocated
memory causing NULL pointer dereference in hub_quiesce() during cleanup.

Now after such error the hdev->maxchild is set to 0 to avoid cleanup
of uninitialized ports.

Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'for-usb-2013-08-15-step-1' into for-usb-next 2013-08-16T01:00:46+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2013-08-16T01:00:46+00:00 5845c13a70b40f1ce4dfe83acb7796bed8a60672 xhci: Step 1 to fix usb-linus and usb-next. Hi Greg, This is the first of three steps to fix your usb-linus and usb-next trees. As I mentioned, commit 4fae6f0fa86f92e6bc7429371b1e177ad0aaac66 "USB: handle LPM errors during device suspend correctly" was incorrectly added to usb-next when it should have been added to usb-linus and marked for stable. Two port power off bug fixes touch the same code that patch touches, but it's not easy to simply move commit 4fae6f0f patch to usb-linus because commit 28e861658e23ca94692f98e245d254c75c8088a7 "USB: refactor code for enabling/disabling remote wakeup" also touched those code sections. I propose a two step process to fix this: 1. Pull these four patches into usb-linus. 2. Revert commit 28e861658e23ca94692f98e245d254c75c8088a7 from usb-next. Merge usb-linus into usb-next, and resolve the conflicts. I will be sending pull requests for these steps. This pull request is step one, and contains the backported version of commit 4fae6f0fa86f92e6bc7429371b1e177ad0aaac66, the two port power off fixes, and an unrelated xhci-plat bug fix. Sarah Sharp Resolved conflicts: drivers/usb/core/hub.c 
xhci: Step 1 to fix usb-linus and usb-next.

Hi Greg,

This is the first of three steps to fix your usb-linus and usb-next
trees.  As I mentioned, commit 4fae6f0fa86f92e6bc7429371b1e177ad0aaac66
"USB: handle LPM errors during device suspend correctly" was incorrectly
added to usb-next when it should have been added to usb-linus and marked
for stable.

Two port power off bug fixes touch the same code that patch touches, but
it's not easy to simply move commit 4fae6f0f patch to usb-linus because
commit 28e861658e23ca94692f98e245d254c75c8088a7 "USB: refactor code for
enabling/disabling remote wakeup" also touched those code sections.

I propose a two step process to fix this:

1. Pull these four patches into usb-linus.

2. Revert commit 28e861658e23ca94692f98e245d254c75c8088a7 from usb-next.
   Merge usb-linus into usb-next, and resolve the conflicts.

I will be sending pull requests for these steps.

This pull request is step one, and contains the backported version of
commit 4fae6f0fa86f92e6bc7429371b1e177ad0aaac66, the two port power off
fixes, and an unrelated xhci-plat bug fix.

Sarah Sharp

Resolved conflicts:
	drivers/usb/core/hub.c
usb: Don't fail port power resume on device disconnect. 2013-08-15T17:52:35+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2013-08-06T01:58:15+00:00 d49dad3e11638f66be4e16573ffaa8c46a09e3b3 Userspace can tell the kernel to power off any USB port, including ones that are visible and connectible to users. When an attached USB device goes into suspend, the port will be powered off if the pm_qos_no_port_poweroff file for its port is set to 0, the device does not have remote wakeup enabled, and the device is marked as persistent. If the user disconnects the USB device while the port is powered off, the current code does not handle that properly. If you disconnect a device, and then run `lsusb -v -s` for the device, the device disconnect does not get handled by the USB core. The runtime resume of the port fails, because hub_port_debounce_be_connected() returns -ETIMEDOUT. This means the port resume fails and khubd doesn't handle the USB device disconnect. This leaves the device listed in lsusb, and the port's runtime_status will be permanently marked as "error". Fix this by ignoring the return value of hub_port_debounce_be_connected. Users can disconnect USB devices while the ports are powered off, and we must be able to handle that. This patch should be backported to kernels as old as 3.9, that contain the commit ad493e5e580546e6c3024b76a41535476da1546a "usb: add usb port auto power off mechanism" Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Lan Tianyu <tianyu.lan@intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> 
Userspace can tell the kernel to power off any USB port, including ones
that are visible and connectible to users.  When an attached USB device
goes into suspend, the port will be powered off if the
pm_qos_no_port_poweroff file for its port is set to 0, the device does
not have remote wakeup enabled, and the device is marked as persistent.

If the user disconnects the USB device while the port is powered off,
the current code does not handle that properly.  If you disconnect a
device, and then run `lsusb -v -s` for the device, the device disconnect
does not get handled by the USB core.  The runtime resume of the port
fails, because hub_port_debounce_be_connected() returns -ETIMEDOUT.

This means the port resume fails and khubd doesn't handle the USB device
disconnect.  This leaves the device listed in lsusb, and the port's
runtime_status will be permanently marked as "error".

Fix this by ignoring the return value of hub_port_debounce_be_connected.
Users can disconnect USB devices while the ports are powered off, and we
must be able to handle that.

This patch should be backported to kernels as old as 3.9, that
contain the commit ad493e5e580546e6c3024b76a41535476da1546a "usb: add
usb port auto power off mechanism"

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Lan Tianyu <tianyu.lan@intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
usb: don't check pm qos NO_POWER_OFF flag in usb_port_suspend() 2013-08-15T17:52:33+00:00 Lan Tianyu tianyu.lan@intel.com 2013-07-03T14:17:54+00:00 98a4f1ff7bea8002ab79d6776e30d27932e88244 The pm qos NO_POWER_OFF flag is checked twice during usb device suspend to see if the usb port power off condition is met. This is redundant and also will prevent the port from being powered off if the NO_POWER_OFF flag is changed to 1 from 0 after the device was already suspended. More detail in the following link. http://marc.info/?l=linux-usb&m=136543949130865&w=2 This patch should be backported to kernels as old as 3.7, that contain the commit f7ac7787ad361e31a7972e2854ed8dc2eedfac3b "usb/acpi: Use ACPI methods to power off ports." Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org 
The pm qos NO_POWER_OFF flag is checked twice during usb device suspend
to see if the usb port power off condition is met. This is redundant and
also will prevent the port from being powered off if the NO_POWER_OFF
flag is changed to 1 from 0 after the device was already suspended.

More detail in the following link.
	http://marc.info/?l=linux-usb&m=136543949130865&w=2

This patch should be backported to kernels as old as 3.7, that
contain the commit f7ac7787ad361e31a7972e2854ed8dc2eedfac3b "usb/acpi:
Use ACPI methods to power off ports."

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org