This patch (as1200) finishes some fixes that were left incomplete by
an earlier patch.

Although nobody has addressed this issue in the past, it turns out
that we need to distinguish between two different modes of disabling
and enabling endpoints.  In one mode only the data structures in
usbcore are affected, and in the other mode the host controller and
device hardware states are affected as well.

The earlier patch added an extra argument to the routines in the
enable_endpoint pathways to reflect this difference.  This patch adds
corresponding arguments to the disable_endpoint pathways.  Without
this change, the endpoint toggle state can get out of sync between
the host and the device.  The exact mechanism depends on the details
of the host controller (whether or not it stores its own copy of the
toggle values).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Dan Streetman <ddstreet@ieee.org>
Tested-by: Dan Streetman <ddstreet@ieee.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1197) fixes an error introduced recently.  Since a
significant number of devices can't handle Set-Interface requests, we
no longer call usb_set_interface() when a driver unbinds from an
interface, provided the interface is already in altsetting 0.  However
the interface still does get disabled, and the call to
usb_set_interface() was the only thing re-enabling it.  Since the
interface doesn't get re-enabled, further attempts to use it fail.

So the patch adds a call to usb_enable_interface() when a driver
unbinds and the interface is in altsetting 0.  For this to work
right, the interface's endpoints have to be re-enabled but their
toggles have to be left alone.  Therefore an additional argument is
added to usb_enable_endpoint() and usb_enable_interface(), a flag
indicating whether or not the endpoint toggles should be reset.

This is a forward-ported version of a patch which fixes Bugzilla
#12301.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: David Roka <roka@dawid.hu>
Reported-by: Erik Ekman <erik@kryo.se>
Tested-by: Erik Ekman <erik@kryo.se>
Tested-by: Alon Bar-Lev <alon.barlev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1177) modifies the USB core suspend and resume
routines.  The resume functions now will take a pm_message_t argument,
so they will know what sort of resume is occurring.  The new argument
is also passed to the port suspend/resume and bus suspend/resume
routines (although they don't use it for anything but debugging).

In addition, special pm_message_t values are used for user-initiated,
device-initiated (i.e., remote wakeup), and automatic suspend/resume.
By testing these values, drivers can tell whether or not a particular
suspend was an autosuspend.  Unfortunately, they can't do the same for
resumes -- not until the pm_message_t argument is also passed to the
drivers' resume methods.  That will require a bigger change.

IMO, the whole Power Management framework should have been set up this
way in the first place.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1178) uses the new round_jiffies_up_relative() routine
for setting the autosuspend delayed_work timer.  It's appropriate
since we don't care too much about the exact length of the delay, but
we don't want it to be too short (rounded down).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch introduces a new call to be able to do a USB reset from an
atomic contect. This is quite helpful in USB callbacks to handle
errors (when the only thing that can be done is to do a device
reset).

It is done queuing a work struct that will do the actual reset. The
struct is "attached" to an interface so pending requests from an
interface are removed when said interface is unbound from the driver.

The call flow then becomes:

usb_queue_reset_device()
  __usb_queue_reset_device() [workqueue]
    usb_reset_device()

usb_probe_interface()
  usb_cancel_queue_reset()      [error path]

usb_unbind_interface()
  usb_cancel_queue_reset()

usb_driver_release_interface()
  usb_cancel_queue_reset()

Note usb_cancel_queue_reset() needs smarts to try not to unqueue when
it is actually being executed. This happens when we run the reset from
the workqueue: usb_reset_device() is called and on interface unbind
time, usb_cancel_queue_reset() would be called. That would deadlock on
cancel_work_sync(). To avoid that, we set (before running
usb_reset_device()) usb_intf->reset_running and clear it inmediately
after returning.

Patch is against 2.6.28-rc2 and depends on
http://marc.info/?l=linux-usb&m=122581634925308&w=2 (as submitted by
Alan Stern).

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1160b) adds support routines for asynchronous autosuspend
and autoresume, with accompanying documentation updates.  There
already are several potential users of this interface, and others are
likely to arise as autosuspend support becomes more widespread.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

When a driver unbinds from an interface, usbcore always sends a
Set-Interface request to reinstall altsetting 0.  Unforunately, quite
a few devices have buggy firmware that crashes when it receives this
request.

To avoid such problems, this patch (as1180) arranges to send the
Set-Interface request only when the interface is not already in
altsetting 0.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1152) may help prevent some problems associated with the
new policy of unbinding drivers that don't support suspend/resume or
pre_reset/post_reset.  If for any reason the resume or reset fails, and
the device is logically disconnected, there's no point in trying to
rebind the driver.  So the patch checks for success before carrying
out the unbind/rebind.

There was a report from one user that this fixed a problem he was
experiencing, but the details never became fully clear.  In any case,
adding these tests can't hurt.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Reset upon resumption will wipe the input buffer and is therefore
a reason to not suspend if remote wakeup is requested because
the driver needs that data.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1130) fixes an incompatibility between the new PM
infrastructure and USB power management.  We are not allowed to call
drivers' probe routines during a system sleep transition between the
"prepare" and "complete" callbacks, but that's exactly what we do when
a driver doesn't have full suspend/resume support.  Such drivers are
unbound during the "suspend" call and reprobed during the "resume" call.

The patch causes the reprobe step to be skipped if the "complete"
callback hasn't been issued yet, i.e., if the interface's
dev.power.status field is not equal to DPM_ON.  Thus during the
"resume" callback nothing bad will happen, and during the final
"complete" callback the reprobing will occur as desired.

This fixes the problem reported in Bugzilla #11263.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>