linux.git/drivers/usb/chipidea, branch v3.7 Linux kernel source tree USB: chipidea: re-order irq handling to avoid unhandled irqs 2012-09-12T18:20:38+00:00 Richard Zhao richard.zhao@freescale.com 2012-09-12T11:58:11+00:00 b183c19f98f8afee799ee41e062810d6b1c7e123 - let role driver handle irq before ID change check; this gives the role driver a chance to handle disconnect; - disable irq during switch role; no role driver to handle irq in the period. Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
- let role driver handle irq before ID change check; this gives the
  role driver a chance to handle disconnect;
- disable irq during switch role; no role driver to handle irq in
  the period.

Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: chipidea: add -DDEBUG if debugging is enabled 2012-09-12T18:20:38+00:00 Richard Zhao richard.zhao@freescale.com 2012-09-12T11:58:10+00:00 388ed487234429652c1cdb797ad45cb0967b2343 This patch turns on debugging output if CONFIG_USB_CHIPIDEA_DEBUG is enabled. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch turns on debugging output if CONFIG_USB_CHIPIDEA_DEBUG is
enabled.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: chipidea: add vbus detect for udc 2012-09-12T18:20:38+00:00 Richard Zhao richard.zhao@freescale.com 2012-09-12T11:58:09+00:00 8c4fc031954b4eb72daf13d3c907a985a3eee208 Using vbus valid interrupt to detect vbus. Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Using vbus valid interrupt to detect vbus.

Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: chipidea: acknowledge ID change interrupt in irq handler 2012-09-12T18:20:38+00:00 Richard Zhao richard.zhao@freescale.com 2012-09-12T11:58:08+00:00 984f753cf120db60d97271e34cf16c95761f0278 In order to avoid re-queueing of the role changing work, we need to clear the ID change interrupt bit right in the irq handler. Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
In order to avoid re-queueing of the role changing work, we need to clear
the ID change interrupt bit right in the irq handler.

Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: chipidea: delay 2ms before read ID status at probe time 2012-09-12T18:20:38+00:00 Richard Zhao richard.zhao@freescale.com 2012-09-12T11:58:07+00:00 86ad01a907d7856edc07d8b49260c39520c0e932 The ID pin needs 1ms debounce time, even at probe time. We delay 2ms to be on the safe side. Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The ID pin needs 1ms debounce time, even at probe time. We delay 2ms
to be on the safe side.

Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: chipidea: imx: add pinctrl support 2012-09-12T18:20:38+00:00 Richard Zhao richard.zhao@freescale.com 2012-09-12T11:58:06+00:00 b4dbb258b67b12fff4c9df56983934e11813c404 Some controllers may not need to setup pinctrl, so we don't fail the probe if pinctrl get/select failed. Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Some controllers may not need to setup pinctrl, so we don't fail the
probe if pinctrl get/select failed.

Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: chipidea: add imx usbmisc support 2012-09-12T18:20:38+00:00 Richard Zhao richard.zhao@freescale.com 2012-09-12T11:58:05+00:00 d142d6be231713330f9c0d7ee52f23e1b3f19ee4 i.MX usb controllers share non-core registers, which may include SoC specific controls. We turn it into a usbmisc device and usbmisc driver set operations needed by ci13xxx_imx driver. For example, Sabrelite board has bad over-current design, we can usbmisc to disable over-current detection. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
i.MX usb controllers share non-core registers, which may include
SoC specific controls. We turn it into a usbmisc device and usbmisc
driver set operations needed by ci13xxx_imx driver.

For example, Sabrelite board has bad over-current design, we can
usbmisc to disable over-current detection.

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge branch 'chipidea-stable' into usb-next 2012-09-12T18:05:11+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2012-09-12T18:05:11+00:00 08d9c74d45ceb581c11d2ab265c32236b0321a56 These chipidea stable patches are needed for other chipidea patches to be applied properly. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
These chipidea stable patches are needed for other chipidea patches to be
applied properly.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: udc: don't stall endpoint if request list is empty in isr_tr_complete_low 2012-09-12T17:58:38+00:00 Michael Grzeschik m.grzeschik@pengutronix.de 2012-09-12T11:58:04+00:00 db89960e50f45274c07dc60926b5a49489b8a7a0 When attaching an imx28 or imx53 in USB gadget mode to a Windows host and starting a rndis connection we see this message every 4-10 seconds: g_ether gadget: high speed config #2: RNDIS Analysis shows that each time this message is printed, the rndis connection is re-establish due to a reset because of a stalled endpoint (ep 0, dir 1). The endpoint is stalled because the reqeust complete bit on that endpoint is set, but in isr_tr_complete_low() the endpoint request list (mEp->qh.queue) is empty. This patch removed this check, because the code doesn't take the following situation into account: The loop over all endpoints in isr_tr_complete_handler() will call ep_nuke() on both ep0/dir0 and ep/dir1 in the first loop. Pending reqeusts will be flushed and completed here. There seems to be a race condition, the request is nuked, but the request complete bit will be set, too. The subsequent check (in ep0/dir1's loop cycle) for endpoint request list (mEp->qh.queue) empty will fail. Both other mainline chipidea drivers (mv_udc_core.c and fsl_udc_core.c) don't have this check. Cc: stable <stable@vger.kernel.org> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When attaching an imx28 or imx53 in USB gadget mode to a Windows host and
starting a rndis connection we see this message every 4-10 seconds:

    g_ether gadget: high speed config #2: RNDIS

Analysis shows that each time this message is printed, the rndis connection is
re-establish due to a reset because of a stalled endpoint (ep 0, dir 1). The
endpoint is stalled because the reqeust complete bit on that endpoint is set,
but in isr_tr_complete_low() the endpoint request list (mEp->qh.queue) is
empty.

This patch removed this check, because the code doesn't take the following
situation into account:

The loop over all endpoints in isr_tr_complete_handler() will call ep_nuke() on
both ep0/dir0 and ep/dir1 in the first loop. Pending reqeusts will be flushed
and completed here. There seems to be a race condition, the request is nuked,
but the request complete bit will be set, too. The subsequent check (in
ep0/dir1's loop cycle) for endpoint request list (mEp->qh.queue) empty will
fail.

Both other mainline chipidea drivers (mv_udc_core.c and fsl_udc_core.c) don't
have this check.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: cleanup dma_pool if udc_start() fails 2012-09-12T17:58:38+00:00 Marc Kleine-Budde mkl@pengutronix.de 2012-09-12T11:58:03+00:00 ad6b1b97fe8504957d017cd6e4168cac8903d3f3 If udc_start() fails the qh_pool dma-pool cannot be closed because it's still in use. This patch factors out the dma_pool_free() loop into destroy_eps() and calls it in the error path of udc_start(), too. Cc: stable <stable@vger.kernel.org> Reviewed-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
If udc_start() fails the qh_pool dma-pool cannot be closed because
it's still in use. This patch factors out the dma_pool_free() loop
into destroy_eps() and calls it in the error path of udc_start(),
too.

Cc: stable <stable@vger.kernel.org>
Reviewed-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>