linux.git/drivers/usb/cdns3, branch v5.11

usb: cdns3: imx: improve driver .remove API

2020-12-29T05:39:53+00:00

Keep the runtime active during the remove operation, and disable
related clocks.

Signed-off-by: Peter Chen

usb: cdns3: imx: fix can't create core device the second time issue

2020-12-29T05:38:42+00:00

The cdns3 core device is populated by calling of_platform_populate,
the flag OF_POPULATED is set for core device node, if this flag
is not cleared, when calling of_platform_populate the second time
after loading parent module again, the OF code will not try to create
platform device for core device.

To fix it, it uses of_platform_depopulate to depopulate the core
device which the parent created, and the flag OF_POPULATED for
core device node will be cleared accordingly.

Cc: 
Fixes: 1e056efab993 ("usb: cdns3: add NXP imx8qm glue layer")
Signed-off-by: Peter Chen

usb: cdns3: imx: fix writing read-only memory issue

2020-12-29T05:38:00+00:00

The memory for struct clk_bulk_data should not be static which will be written
during the clk_bulk_get. It fixed below oops when loading cdns3-imx as module.

[   17.272605] Unable to handle kernel write to read-only memory at virtual address ffff8000092a5398
[   17.299730] Mem abort info:
[   17.313542] unregister ISI channel: mxc_isi.4
[   17.324076]   ESR = 0x9600004f
[   17.344658]   EC = 0x25: DABT (current EL), IL = 32 bits
[   17.402055]   SET = 0, FnV = 0
[   17.404321] mxs_phy 5b100000.usbphy: supply phy-3p0 not found, using dummy regulator
[   17.405121]   EA = 0, S1PTW = 0
[   17.405133] Data abort info:
[   17.496231]   ISV = 0, ISS = 0x0000004f
[   17.510871]   CM = 0, WnR = 1
[   17.533542] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081ea5000
[   17.545709] [ffff8000092a5398] pgd=00000008bffff003, p4d=00000008bffff003, pud=00000008bfffe003, pmd=0000000885041003, pte=006000088513b783
[   17.573521] Internal error: Oops: 9600004f [#1] PREEMPT SMP
[   17.579113] Modules linked in: usbmisc_imx phy_mxs_usb phy_cadence_salvo cdns3_imx(+) tcpci imx8_media_dev(C) caam error
[   17.590044] CPU: 2 PID: 253 Comm: systemd-udevd Tainted: G         C        5.10.0-rc4-04445-g11f3c3a29d0-dirty #19
[   17.600488] Hardware name: Freescale i.MX8QXP MEK (DT)
[   17.605633] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--)
[   17.611662] pc : __clk_bulk_get+0x48/0x130
[   17.615786] lr : clk_bulk_get+0x18/0x20
[   17.619634] sp : ffff80001369b880
[   17.622953] x29: ffff80001369b880 x28: 0000000000000013
[   17.628277] x27: 0000000000000100 x26: ffff00080553b100
[   17.633602] x25: ffff80001229b4d8 x24: 0000000000000000
[   17.638928] x23: ffff000800665410 x22: 0000000000000005
[   17.644275] x21: ffff8000092a5390 x20: ffff000800665400
[   17.649605] x19: ffff000804e6f980 x18: 000000005b110000
[   17.654946] x17: 0000000000000000 x16: 0000000000000000
[   17.660274] x15: ffff800011989100 x14: 0000000000000000
[   17.665599] x13: ffff800013ce1000 x12: ffff800013ca1000
[   17.670924] x11: 000000005b110000 x10: 0000000000000000
[   17.676249] x9 : ffff8000106c5a30 x8 : ffff000804e6fa00
[   17.681575] x7 : 0000000000000000 x6 : 000000000000003f
[   17.686901] x5 : 0000000000000040 x4 : ffff80001369b8b0
[   17.692228] x3 : ffff8000092a5398 x2 : ffff8000092a5390
[   17.697574] x1 : ffff8000092a53e8 x0 : 0000000000000004
[   17.702905] Call trace:
[   17.705366]  __clk_bulk_get+0x48/0x130
[   17.709125]  clk_bulk_get+0x18/0x20
[   17.712620]  devm_clk_bulk_get+0x58/0xb8
[   17.716563]  cdns_imx_probe+0x84/0x1f0 [cdns3_imx]
[   17.721363]  platform_drv_probe+0x58/0xa8
[   17.725381]  really_probe+0xec/0x4c8
[   17.728967]  driver_probe_device+0xf4/0x160
[   17.733160]  device_driver_attach+0x74/0x80
[   17.737355]  __driver_attach+0xa4/0x170
[   17.741202]  bus_for_each_dev+0x74/0xc8
[   17.745043]  driver_attach+0x28/0x30
[   17.748620]  bus_add_driver+0x144/0x228
[   17.752462]  driver_register+0x68/0x118
[   17.756308]  __platform_driver_register+0x4c/0x58
[   17.761022]  cdns_imx_driver_init+0x24/0x1000 [cdns3_imx]
[   17.766434]  do_one_initcall+0x48/0x2c0
[   17.770280]  do_init_module+0x5c/0x220
[   17.774029]  load_module+0x210c/0x2858
[   17.777784]  __do_sys_finit_module+0xb8/0x120
[   17.782148]  __arm64_sys_finit_module+0x24/0x30
[   17.786691]  el0_svc_common.constprop.0+0x70/0x168
[   17.791497]  do_el0_svc+0x28/0x88
[   17.794822]  el0_sync_handler+0x158/0x160
[   17.798833]  el0_sync+0x140/0x180
[   17.802158] Code: aa0203f5 91002043 8b205021 a90153f3 (f801047f)

Cc: 
Fixes: 1e056efab993 ("usb: cdns3: add NXP imx8qm glue layer")
Signed-off-by: Peter Chen

Merge tag 'usb-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next

2020-12-10T10:30:31+00:00

Peter writes:

Below are main changes for v5.11-rc1:

For Chipidea USB2:
- Add tracepoint support for UDC
- Some tiny improvements

For Cadence USB3
- Add some quirks for host mode, and let host work well at more use cases
	* SKIP_PHY_INIT
	* Disable BEI
	* Enable runtime PM default for i.mx platform
- Some tiny improvements

* tag 'usb-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
  MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER
  usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data()
  usb: chipidea: usbmisc_imx: Use of_device_get_match_data()
  usb: cdns3: fix NULL pointer dereference on no platform data
  usb: chipidea: trace: fix the endian issue
  usb: chipidea: add tracepoint support for udc
  doc: dt-binding: cdns,usb3: add wakeup-irq
  usb: cdns3: imx: enable runtime pm by default
  usb: cdns3: add quirk for enable runtime pm by default
  usb: cdns3: host: disable BEI support
  usb: cdns3: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT
  usb: cdns3: host: add .suspend_quirk for xhci-plat.c
  usb: cdns3: Rids of duplicate error message
  usb: cdns3: Add static to cdns3_gadget_exit function

usb: cdns3: fix NULL pointer dereference on no platform data

2020-12-10T09:35:33+00:00

Some platforms (e.g. TI) will not have any platform data which will
lead to NULL pointer dereference if we don't check for NULL pdata.

Fixes: 7cea9657756b ("usb: cdns3: add quirk for enable runtime pm by default")
Reported-by: Nishanth Menon 
Signed-off-by: Roger Quadros 
Acked-by: Pawel Laszczak 
Signed-off-by: Peter Chen

usb: cdns3: imx: enable runtime pm by default

2020-12-10T00:45:26+00:00

Enable runtime pm by default

Reviewed-by: Jun Li 
Signed-off-by: Peter Chen

usb: cdns3: add quirk for enable runtime pm by default

2020-12-10T00:45:26+00:00

Some vendors (eg: NXP) may want to enable runtime pm by default for
power saving, add one quirk for it.

Reviewed-by: Jun Li 
Signed-off-by: Peter Chen

usb: cdns3: host: disable BEI support

2020-12-10T00:45:26+00:00

The Cadence xHCI doesn't support BEI well, it causes the disconnection
of ISOC devices can't be detected, so we disable it.

Reviewed-by: Jun Li 
Signed-off-by: Peter Chen

usb: cdns3: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT

2020-12-10T00:45:26+00:00

cdns3 manages PHY by own DRD driver, so skip the management by
HCD core.

Reviewed-by: Jun Li 
Reviewed-by: Pawel Laszczak 
Signed-off-by: Peter Chen

usb: cdns3: host: add .suspend_quirk for xhci-plat.c

2020-12-10T00:45:26+00:00

cdns3 has some special PM sequence between xhci_bus_suspend and
xhci_suspend, add quirk to implement it.

Reviewed-by: Pawel Laszczak 
Signed-off-by: Peter Chen