linux.git/drivers/usb/Makefile, branch v2.6.14 Linux kernel source tree [PATCH] USB: add ldusb driver 2005-07-12T18:52:57+00:00 Michael Hund mhund@ld-didactic.de 2005-06-27T20:44:22+00:00 2824bd250f0be1551747cc3ed5ae07facc285b57 The following driver provides complete interrupt-in and interrupt-out reports (raw data) to a user program. Until now it uses the HIDIOCGDEVINFO ioctl call, because I don't know better :-(. Perhaps, it will be ok for you - and I will be happy, if you assign 8 minor numbers. I have tested it in several environments and it works very well for me. However, it has a problem with two or more devices at the same hub, if the two or more devices need 1 ms interrupt-in transfers. Unfortunately more than one interrupt-in transfer every ms isn't possible (ehci driver?). This is why the min_interrupt_in_interval and min_interrupt_out_interval are increased to 2 ms (see the corresponding module parameters). This way, I can use two devices simultaneously at the same hub. Signed-off-by: Michael Hund <mhund@ld-didactic.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
The following driver provides complete interrupt-in and interrupt-out
reports (raw data) to a user program. Until now it uses the
HIDIOCGDEVINFO ioctl call, because I don't know better :-(. Perhaps, it
will be ok for you - and I will be happy, if you assign 8 minor numbers.

I have tested it in several environments and it works very well for me.
However, it has a problem with two or more devices at the same hub, if
the two or more devices need 1 ms interrupt-in transfers. Unfortunately
more than one interrupt-in transfer every ms isn't possible (ehci
driver?). This is why the min_interrupt_in_interval and
min_interrupt_out_interval are increased to 2 ms (see the corresponding
module parameters). This way, I can use two devices simultaneously at
the same hub.

Signed-off-by: Michael Hund <mhund@ld-didactic.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[PATCH] USB: SiS USB Makefile fixes 2005-07-12T18:52:55+00:00 Thomas Winischhofer thomas@winischhofer.net 2005-06-24T16:44:20+00:00 ead99eb00190a274e3b3666ecd431be12c2b7888 although 2.6.12 now contains the sisusb driver, it failes to build this driver due to a missing patch of the Makefile. From: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
although 2.6.12 now contains the sisusb driver, it failes to build this
driver due to a missing patch of the Makefile.

From: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6 2005-06-27T22:13:26+00:00 Linus Torvalds torvalds@ppc970.osdl.org 2005-06-27T22:13:26+00:00 d3b8a1a8496c83bc4a3cc76505c29255af15572c 






[PATCH] USB: Add isp116x-hcd USB host controller driver
2005-06-27T21:43:42+00:00

Olav Kongas
ok@artecdesign.ee

2005-04-09T19:57:39+00:00

4808a1c0261176f9c7e28e7f108d41a381a7d0fc

This patch provides an "isp116x-hcd" driver for Philips'
ISP1160/ISP1161 USB host controllers.

The driver:
 - is relatively small, meant for use on embedded platforms.
 - runs usbtests 1-14 without problems for days.
 - has been in use by 6-7 different people on ARM and PPC platforms,
   running a range of devices including USB hubs.
 - supports suspend/resume of both the platform device and the root hub;
   supports remote wakeup of the root hub (but NOT the platform device)
   by USB devices.
 - does NOT support ISO transfers (nobody has asked for them).
 - is PIO-only.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>





This patch provides an "isp116x-hcd" driver for Philips'
ISP1160/ISP1161 USB host controllers.

The driver:
 - is relatively small, meant for use on embedded platforms.
 - runs usbtests 1-14 without problems for days.
 - has been in use by 6-7 different people on ARM and PPC platforms,
   running a range of devices including USB hubs.
 - supports suspend/resume of both the platform device and the root hub;
   supports remote wakeup of the root hub (but NOT the platform device)
   by USB devices.
 - does NOT support ISO transfers (nobody has asked for them).
 - is PIO-only.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>







Input: add driver for Acecad Flair USB tablets
2005-06-06T07:22:37+00:00

Stephane VOLTZ
svoltz@numericable.fr

2005-06-06T07:22:37+00:00

53880546979605dae20ee0404a0e998e188fe7ad

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>





Signed-off-by: Dmitry Torokhov <dtor@mail.ru>







Linux-2.6.12-rc2
2005-04-16T22:20:36+00:00

Linus Torvalds
torvalds@ppc970.osdl.org

2005-04-16T22:20:36+00:00

1da177e4c3f41524e886b7f1b8a0c1fc7321cac2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!





Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!