<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/tty, branch vsnprintf</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>Merge tag 'tty-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty</title>
<updated>2024-12-14T17:31:19+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2024-12-14T17:31:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=636110be626b1e039b82d6eba4192d3cb82e5c92'/>
<id>636110be626b1e039b82d6eba4192d3cb82e5c92</id>
<content type='text'>
Pull serial driver fixes from Greg KH:
 "Here are two small serial driver fixes for 6.13-rc3.  They are:

   - ioport build fallout fix for the 8250 port driver that should
     resolve Guenter's runtime problems

   - sh-sci driver bugfix for a reported problem

  Both of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: Work around warning backtrace in serial8250_set_defaults
  serial: sh-sci: Check if TX data was written to device in .tx_empty()
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull serial driver fixes from Greg KH:
 "Here are two small serial driver fixes for 6.13-rc3.  They are:

   - ioport build fallout fix for the 8250 port driver that should
     resolve Guenter's runtime problems

   - sh-sci driver bugfix for a reported problem

  Both of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: Work around warning backtrace in serial8250_set_defaults
  serial: sh-sci: Check if TX data was written to device in .tx_empty()
</pre>
</div>
</content>
</entry>
<entry>
<title>tty: serial: Work around warning backtrace in serial8250_set_defaults</title>
<updated>2024-12-06T07:00:01+00:00</updated>
<author>
<name>Guenter Roeck</name>
<email>linux@roeck-us.net</email>
</author>
<published>2024-12-05T14:30:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=4e450dfd0f968b79204637bf13280892dff287b1'/>
<id>4e450dfd0f968b79204637bf13280892dff287b1</id>
<content type='text'>
Commit 7c7e6c8924e7 ("tty: serial: handle HAS_IOPORT dependencies")
triggers warning backtraces on a number of platforms which don't support
IO ports.

WARNING: CPU: 0 PID: 0 at drivers/tty/serial/8250/8250_port.c:470 serial8250_set_defaults+0x148/0x1d8
Unsupported UART type 0

The problem is seen because serial8250_set_defaults() is called for
all members of the serial8250_ports[] array even if that array is
not initialized.

Work around the problem by only displaying the warning if the port
type is not 0 (UPIO_PORT) or if iobase is set for the port.

Fixes: 7c7e6c8924e7 ("tty: serial: handle HAS_IOPORT dependencies")
Acked-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Cc: Niklas Schnelle &lt;schnelle@linux.ibm.com&gt;
Signed-off-by: Guenter Roeck &lt;linux@roeck-us.net&gt;
Tested-by: Stafford Horne &lt;shorne@gmail.com&gt;
Link: https://lore.kernel.org/r/20241205143033.2695333-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit 7c7e6c8924e7 ("tty: serial: handle HAS_IOPORT dependencies")
triggers warning backtraces on a number of platforms which don't support
IO ports.

WARNING: CPU: 0 PID: 0 at drivers/tty/serial/8250/8250_port.c:470 serial8250_set_defaults+0x148/0x1d8
Unsupported UART type 0

The problem is seen because serial8250_set_defaults() is called for
all members of the serial8250_ports[] array even if that array is
not initialized.

Work around the problem by only displaying the warning if the port
type is not 0 (UPIO_PORT) or if iobase is set for the port.

Fixes: 7c7e6c8924e7 ("tty: serial: handle HAS_IOPORT dependencies")
Acked-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Cc: Niklas Schnelle &lt;schnelle@linux.ibm.com&gt;
Signed-off-by: Guenter Roeck &lt;linux@roeck-us.net&gt;
Tested-by: Stafford Horne &lt;shorne@gmail.com&gt;
Link: https://lore.kernel.org/r/20241205143033.2695333-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>serial: sh-sci: Check if TX data was written to device in .tx_empty()</title>
<updated>2024-12-04T15:51:25+00:00</updated>
<author>
<name>Claudiu Beznea</name>
<email>claudiu.beznea.uj@bp.renesas.com</email>
</author>
<published>2024-11-25T11:58:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=7cc0e0a43a91052477c2921f924a37d9c3891f0c'/>
<id>7cc0e0a43a91052477c2921f924a37d9c3891f0c</id>
<content type='text'>
On the Renesas RZ/G3S, when doing suspend to RAM, the uart_suspend_port()
is called. The uart_suspend_port() calls 3 times the
struct uart_port::ops::tx_empty() before shutting down the port.

According to the documentation, the struct uart_port::ops::tx_empty()
API tests whether the transmitter FIFO and shifter for the port is
empty.

The Renesas RZ/G3S SCIFA IP reports the number of data units stored in the
transmit FIFO through the FDR (FIFO Data Count Register). The data units
in the FIFOs are written in the shift register and transmitted from there.
The TEND bit in the Serial Status Register reports if the data was
transmitted from the shift register.

In the previous code, in the tx_empty() API implemented by the sh-sci
driver, it is considered that the TX is empty if the hardware reports the
TEND bit set and the number of data units in the FIFO is zero.

According to the HW manual, the TEND bit has the following meaning:

0: Transmission is in the waiting state or in progress.
1: Transmission is completed.

It has been noticed that when opening the serial device w/o using it and
then switch to a power saving mode, the tx_empty() call in the
uart_port_suspend() function fails, leading to the "Unable to drain
transmitter" message being printed on the console. This is because the
TEND=0 if nothing has been transmitted and the FIFOs are empty. As the
TEND=0 has double meaning (waiting state, in progress) we can't
determined the scenario described above.

Add a software workaround for this. This sets a variable if any data has
been sent on the serial console (when using PIO) or if the DMA callback has
been called (meaning something has been transmitted). In the tx_empty()
API the status of the DMA transaction is also checked and if it is
completed or in progress the code falls back in checking the hardware
registers instead of relying on the software variable.

Fixes: 73a19e4c0301 ("serial: sh-sci: Add DMA support.")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea &lt;claudiu.beznea.uj@bp.renesas.com&gt;
Link: https://lore.kernel.org/r/20241125115856.513642-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
On the Renesas RZ/G3S, when doing suspend to RAM, the uart_suspend_port()
is called. The uart_suspend_port() calls 3 times the
struct uart_port::ops::tx_empty() before shutting down the port.

According to the documentation, the struct uart_port::ops::tx_empty()
API tests whether the transmitter FIFO and shifter for the port is
empty.

The Renesas RZ/G3S SCIFA IP reports the number of data units stored in the
transmit FIFO through the FDR (FIFO Data Count Register). The data units
in the FIFOs are written in the shift register and transmitted from there.
The TEND bit in the Serial Status Register reports if the data was
transmitted from the shift register.

In the previous code, in the tx_empty() API implemented by the sh-sci
driver, it is considered that the TX is empty if the hardware reports the
TEND bit set and the number of data units in the FIFO is zero.

According to the HW manual, the TEND bit has the following meaning:

0: Transmission is in the waiting state or in progress.
1: Transmission is completed.

It has been noticed that when opening the serial device w/o using it and
then switch to a power saving mode, the tx_empty() call in the
uart_port_suspend() function fails, leading to the "Unable to drain
transmitter" message being printed on the console. This is because the
TEND=0 if nothing has been transmitted and the FIFOs are empty. As the
TEND=0 has double meaning (waiting state, in progress) we can't
determined the scenario described above.

Add a software workaround for this. This sets a variable if any data has
been sent on the serial console (when using PIO) or if the DMA callback has
been called (meaning something has been transmitted). In the tx_empty()
API the status of the DMA transaction is also checked and if it is
completed or in progress the code falls back in checking the hardware
registers instead of relying on the software variable.

Fixes: 73a19e4c0301 ("serial: sh-sci: Add DMA support.")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea &lt;claudiu.beznea.uj@bp.renesas.com&gt;
Link: https://lore.kernel.org/r/20241125115856.513642-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>module: Convert default symbol namespace to string literal</title>
<updated>2024-12-03T16:22:25+00:00</updated>
<author>
<name>Masahiro Yamada</name>
<email>masahiroy@kernel.org</email>
</author>
<published>2024-12-03T10:21:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=ceb8bf2ceaa77fe222fe8fe32cb7789c9099ddf1'/>
<id>ceb8bf2ceaa77fe222fe8fe32cb7789c9099ddf1</id>
<content type='text'>
Commit cdd30ebb1b9f ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.

This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.

Signed-off-by: Masahiro Yamada &lt;masahiroy@kernel.org&gt;
Reviewed-by: Uwe Kleine-König &lt;u.kleine-koenig@baylibre.com&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit cdd30ebb1b9f ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.

This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.

Signed-off-by: Masahiro Yamada &lt;masahiroy@kernel.org&gt;
Reviewed-by: Uwe Kleine-König &lt;u.kleine-koenig@baylibre.com&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>module: Convert symbol namespace to string literal</title>
<updated>2024-12-02T19:34:44+00:00</updated>
<author>
<name>Peter Zijlstra</name>
<email>peterz@infradead.org</email>
</author>
<published>2024-12-02T14:59:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=cdd30ebb1b9f36159d66f088b61aee264e649d7a'/>
<id>cdd30ebb1b9f36159d66f088b61aee264e649d7a</id>
<content type='text'>
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.

Scripted using

  git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
  do
    awk -i inplace '
      /^#define EXPORT_SYMBOL_NS/ {
        gsub(/__stringify\(ns\)/, "ns");
        print;
        next;
      }
      /^#define MODULE_IMPORT_NS/ {
        gsub(/__stringify\(ns\)/, "ns");
        print;
        next;
      }
      /MODULE_IMPORT_NS/ {
        $0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
      }
      /EXPORT_SYMBOL_NS/ {
        if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
  	if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &amp;&amp;
  	    $0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &amp;&amp;
  	    $0 !~ /^my/) {
  	  getline line;
  	  gsub(/[[:space:]]*\\$/, "");
  	  gsub(/[[:space:]]/, "", line);
  	  $0 = $0 " " line;
  	}

  	$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
  		    "\\1(\\2, \"\\3\")", "g");
        }
      }
      { print }' $file;
  done

Requested-by: Masahiro Yamada &lt;masahiroy@kernel.org&gt;
Signed-off-by: Peter Zijlstra (Intel) &lt;peterz@infradead.org&gt;
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH &lt;gregkh@linuxfoundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.

Scripted using

  git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
  do
    awk -i inplace '
      /^#define EXPORT_SYMBOL_NS/ {
        gsub(/__stringify\(ns\)/, "ns");
        print;
        next;
      }
      /^#define MODULE_IMPORT_NS/ {
        gsub(/__stringify\(ns\)/, "ns");
        print;
        next;
      }
      /MODULE_IMPORT_NS/ {
        $0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
      }
      /EXPORT_SYMBOL_NS/ {
        if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
  	if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &amp;&amp;
  	    $0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &amp;&amp;
  	    $0 !~ /^my/) {
  	  getline line;
  	  gsub(/[[:space:]]*\\$/, "");
  	  gsub(/[[:space:]]/, "", line);
  	  $0 = $0 " " line;
  	}

  	$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
  		    "\\1(\\2, \"\\3\")", "g");
        }
      }
      { print }' $file;
  done

Requested-by: Masahiro Yamada &lt;masahiroy@kernel.org&gt;
Signed-off-by: Peter Zijlstra (Intel) &lt;peterz@infradead.org&gt;
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH &lt;gregkh@linuxfoundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Get rid of 'remove_new' relic from platform driver struct</title>
<updated>2024-12-01T23:12:43+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2024-12-01T23:12:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=e70140ba0d2b1a30467d4af6bcfe761327b9ec95'/>
<id>e70140ba0d2b1a30467d4af6bcfe761327b9ec95</id>
<content type='text'>
The continual trickle of small conversion patches is grating on me, and
is really not helping.  Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:

  /*
   * .remove_new() is a relic from a prototype conversion of .remove().
   * New drivers are supposed to implement .remove(). Once all drivers are
   * converted to not use .remove_new any more, it will be dropped.
   */

This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.

I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.

Then I just removed the old (sic) .remove_new member function, and this
is the end result.  No more unnecessary conversion noise.

Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The continual trickle of small conversion patches is grating on me, and
is really not helping.  Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:

  /*
   * .remove_new() is a relic from a prototype conversion of .remove().
   * New drivers are supposed to implement .remove(). Once all drivers are
   * converted to not use .remove_new any more, it will be dropped.
   */

This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.

I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.

Then I just removed the old (sic) .remove_new member function, and this
is the end result.  No more unnecessary conversion noise.

Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty</title>
<updated>2024-11-30T17:03:16+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2024-11-30T17:03:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=d8b78066f4c9c8ec898bd4246fc4db31d476dd88'/>
<id>d8b78066f4c9c8ec898bd4246fc4db31d476dd88</id>
<content type='text'>
Pull tty / serial driver updates from Greg KH:
 "Here is a small set of tty and serial driver updates for 6.13-rc1.
  Nothing major at all this time, only some small changes:

   - few device tree binding updates

   - 8250_exar serial driver updates

   - imx serial driver updates

   - sprd_serial driver updates

   - other tiny serial driver updates, full details in the shortlog

  All of these have been in linux-next for a while with one reported
  issue, but that commit has now been reverted"

* tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits)
  Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"
  serial: amba-pl011: fix build regression
  dt-bindings: serial: Add a new compatible string for ums9632
  serial: sprd: Add support for sc9632
  tty/serial/altera_uart: unwrap error log string
  tty/serial/altera_jtaguart: unwrap error log string
  serial: amba-pl011: Fix RX stall when DMA is used
  tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler
  serial: 8250_fintek: Add support for F81216E
  serial: sh-sci: Clean sci_ports[0] after at earlycon exit
  tty: atmel_serial: Fix typo retreives to retrieves
  tty: atmel_serial: Use devm_platform_ioremap_resource()
  serial: 8250: omap: Move pm_runtime_get_sync
  tty: serial: samsung: Add Exynos8895 compatible
  dt-bindings: serial: samsung: Add samsung,exynos8895-uart compatible
  serial: 8250_dw: Add Sophgo SG2044 quirk
  dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts
  dt-bindings: serial: snps,dw-apb-uart: merge duplicate compatible entry.
  altera_jtaguart: Use dev_err() to report error attaching IRQ
  altera_uart: Use dev_err() to report error attaching IRQ handler
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull tty / serial driver updates from Greg KH:
 "Here is a small set of tty and serial driver updates for 6.13-rc1.
  Nothing major at all this time, only some small changes:

   - few device tree binding updates

   - 8250_exar serial driver updates

   - imx serial driver updates

   - sprd_serial driver updates

   - other tiny serial driver updates, full details in the shortlog

  All of these have been in linux-next for a while with one reported
  issue, but that commit has now been reverted"

* tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits)
  Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"
  serial: amba-pl011: fix build regression
  dt-bindings: serial: Add a new compatible string for ums9632
  serial: sprd: Add support for sc9632
  tty/serial/altera_uart: unwrap error log string
  tty/serial/altera_jtaguart: unwrap error log string
  serial: amba-pl011: Fix RX stall when DMA is used
  tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler
  serial: 8250_fintek: Add support for F81216E
  serial: sh-sci: Clean sci_ports[0] after at earlycon exit
  tty: atmel_serial: Fix typo retreives to retrieves
  tty: atmel_serial: Use devm_platform_ioremap_resource()
  serial: 8250: omap: Move pm_runtime_get_sync
  tty: serial: samsung: Add Exynos8895 compatible
  dt-bindings: serial: samsung: Add samsung,exynos8895-uart compatible
  serial: 8250_dw: Add Sophgo SG2044 quirk
  dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts
  dt-bindings: serial: snps,dw-apb-uart: merge duplicate compatible entry.
  altera_jtaguart: Use dev_err() to report error attaching IRQ
  altera_uart: Use dev_err() to report error attaching IRQ handler
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"</title>
<updated>2024-11-30T15:55:56+00:00</updated>
<author>
<name>Greg Kroah-Hartman</name>
<email>gregkh@linuxfoundation.org</email>
</author>
<published>2024-11-30T15:55:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=718632467d88e98816fa01ab12681ef1c2aa56f8'/>
<id>718632467d88e98816fa01ab12681ef1c2aa56f8</id>
<content type='text'>
This reverts commit 3791ea69a4858b81e0277f695ca40f5aae40f312.

It was reported to cause boot-time issues, so revert it for now.

Reported-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Fixes: 3791ea69a485 ("serial: sh-sci: Clean sci_ports[0] after at earlycon exit")
Cc: stable &lt;stable@kernel.org&gt;
Cc: Claudiu Beznea &lt;claudiu.beznea.uj@bp.renesas.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This reverts commit 3791ea69a4858b81e0277f695ca40f5aae40f312.

It was reported to cause boot-time issues, so revert it for now.

Reported-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Fixes: 3791ea69a485 ("serial: sh-sci: Clean sci_ports[0] after at earlycon exit")
Cc: stable &lt;stable@kernel.org&gt;
Cc: Claudiu Beznea &lt;claudiu.beznea.uj@bp.renesas.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci</title>
<updated>2024-11-27T02:05:44+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2024-11-27T02:05:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=1746db26f85e4f4b3dd11d7b55f4eff4b0423884'/>
<id>1746db26f85e4f4b3dd11d7b55f4eff4b0423884</id>
<content type='text'>
Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
     callers can't stop a device multiple times, even as we migrate from
     the global pci_rescan_remove_lock to finer-grained locking (Keith
     Busch)

   - Improve pci_walk_bus() implementation by making it recursive and
     moving locking up to avoid need for a 'locked' parameter (Keith
     Busch)

   - Unexport pci_walk_bus_locked(), which is only used internally by
     the PCI core (Keith Busch)

   - Detect some Thunderbolt chips that are built-in and hence
     'trustworthy' by a heuristic since the 'ExternalFacingPort' and
     'usb4-host-interface' ACPI properties are not quite enough (Esther
     Shimanovich)

  Resource management:

   - Use PCI bus addresses (not CPU addresses) in 'ranges' properties
     when building dynamic DT nodes so systems where PCI and CPU
     addresses differ work correctly (Andrea della Porta)

   - Tidy resource sizing and assignment with helpers to reduce
     redundancy (Ilpo Järvinen)

   - Improve pdev_sort_resources() 'bogus alignment' warning to be more
     specific (Ilpo Järvinen)

  Driver binding:

   - Convert driver .remove_new() callbacks to .remove() again to finish
     the conversion from returning 'int' to being 'void' (Sergio
     Paracuellos)

   - Export pcim_request_all_regions(), a managed interface to request
     all BARs (Philipp Stanner)

   - Replace pcim_iomap_regions_request_all() with
     pcim_request_all_regions(), and pcim_iomap_table()[n] with
     pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
     octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
     (Philipp Stanner)

   - Remove the now unused pcim_iomap_regions_request_all() (Philipp
     Stanner)

   - Export pcim_iounmap_region(), a managed interface to unmap and
     release a PCI BAR (Philipp Stanner)

   - Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
     pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
     following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
     cavium (Philipp Stanner)

  Error handling:

   - Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
     bridge; previously Secondary Bus Reset could only be used when
     there was a single device below a bridge (Keith Busch)

   - Warn if we reset a running device where the driver didn't register
     pci_error_handlers notification callbacks (Keith Busch)

  ASPM:

   - Disable ASPM L1 before touching L1 PM Substates to follow the spec
     closer and avoid a CPU load timeout on some platforms (Ajay
     Agarwal)

   - Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
     as required per spec for all L1 Substates changes (Jian-Hong Pan)

  Power management:

   - Enable starfive controller runtime PM before probing host bridge
     (Mayank Rana)

   - Enable runtime power management for host bridges (Krishna chaitanya
     chundru)

  Power control:

   - Use of_platform_device_create() instead of of_platform_populate()
     to create pwrctl platform devices so we can control it based on the
     child nodes (Manivannan Sadhasivam)

   - Create pwrctrl platform devices only if there's a relevant power
     supply property (Manivannan Sadhasivam)

   - Add device link from the pwrctl supplier to the PCI dev to ensure
     pwrctl drivers are probed before the PCI dev driver; this avoids a
     race where pwrctl could change device power state while the PCI
     driver was active (Manivannan Sadhasivam)

   - Find pwrctl device for removal with of_find_device_by_node()
     instead of searching all children of the parent (Manivannan
     Sadhasivam)

   - Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
     ('bwctrl') and hotplug files (Bjorn Helgaas)

  Bandwidth control:

   - Add read/modify/write locking for Link Control 2, which is used to
     manage Link speed (Ilpo Järvinen)

   - Extract Link Bandwidth Management Status check into
     pcie_lbms_seen(), where it can be shared between the bandwidth
     controller and quirks that use it to help retrain failed links
     (Ilpo Järvinen)

   - Re-add Link Bandwidth notification support with updates to address
     the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
     Järvinen)

   - Add pcie_set_target_speed() and related functionality so drivers
     can manage PCIe Link speed based on thermal or other constraints
     (Ilpo Järvinen)

   - Add a thermal cooling driver to throttle PCIe Links via the
     existing thermal management framework (Ilpo Järvinen)

   - Add a userspace selftest for the PCIe bandwidth controller (Ilpo
     Järvinen)

  PCI device hotplug:

   - Add hotplug controller driver for Marvell OCTEON multi-function
     device where function 0 has a management console interface to
     enable/disable and provision various personalities for the other
     functions (Shijith Thotton)

   - Retain a reference to the pci_bus for the lifetime of a pci_slot to
     avoid a use-after-free when the thunderbolt driver resets USB4 host
     routers on boot, causing hotplug remove/add of downstream docks or
     other devices (Lukas Wunner)

   - Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
     (Guilherme Giacomo Simoes)

   - Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)

   - Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
     detection in cpqphp (Ilpo Järvinen)

   - Simplify cpqphp enumeration, which is already simple-minded and
     doesn't handle devices below hot-added bridges (Ilpo Järvinen)

  Virtualization:

   - Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
     capability but do isolate functions as though PCI_ACS_RR and
     PCI_ACS_CR were set, so the functions can be in independent IOMMU
     groups (Mengyuan Lou)

  TLP Processing Hints (TPH):

   - Add and document TLP Processing Hints (TPH) support so drivers can
     enable and disable TPH and the kernel can save/restore TPH
     configuration (Wei Huang)

   - Add TPH Steering Tag support so drivers can retrieve Steering Tag
     values associated with specific CPUs via an ACPI _DSM to improve
     performance by directing DMA writes closer to their consumers (Wei
     Huang)

  Data Object Exchange (DOE):

   - Wait up to 1 second for DOE Busy bit to clear before writing a
     request to the mailbox to avoid failures if the mailbox is still
     busy from a previous transfer (Gregory Price)

  Endpoint framework:

   - Skip attempts to allocate from endpoint controller memory window if
     the requested size is larger than the window (Damien Le Moal)

   - Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
     handle controller-specific size and alignment constraints, and add
     test cases to the endpoint test driver (Damien Le Moal)

   - Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
     observe DWC-specific alignment requirements (Damien Le Moal)

   - Synchronously cancel command handler work in endpoint test before
     cleaning up DMA and BARs (Damien Le Moal)

   - Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
     Cassel)

   - Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
     dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
     (Niklas Cassel)

   - Avoid NULL dereference if Modem Host Interface Endpoint lacks
     'mmio' DT property (Zhongqiu Han)

   - Release PCI domain ID of Endpoint controller parent (not controller
     itself) and before unregistering the controller, to avoid
     use-after-free (Zijun Hu)

   - Clear secondary (not primary) EPC in pci_epc_remove_epf() when
     removing the secondary controller associated with an NTB (Zijun Hu)

  Cadence PCIe controller driver:

   - Lower severity of 'phy-names' message (Bartosz Wawrzyniak)

  Freescale i.MX6 PCIe controller driver:

   - Fix suspend/resume support on i.MX6QDL, which has a hardware
     erratum that prevents use of L2 (Stefan Eichenberger)

  Intel VMD host bridge driver:

   - Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)

  MediaTek PCIe Gen3 controller driver:

   - Update mediatek-gen3 DT binding to require the exact number of
     clocks for each SoC (Fei Shao)

   - Add support for DT 'max-link-speed' and 'num-lanes' properties to
     restrict the link speed and width (AngeloGioacchino Del Regno)

  Microchip PolarFlare PCIe controller driver:

   - Add DT and driver support for using either of the two PolarFire
     Root Ports (Conor Dooley)

  NVIDIA Tegra194 PCIe controller driver:

   - Move endpoint controller cleanups that depend on refclk from the
     host to the notifier that tells us the host has deasserted PERST#,
     when refclk should be valid (Manivannan Sadhasivam)

  Qualcomm PCIe controller driver:

   - Add qcom SAR2130P DT binding with an additional clock (Dmitry
     Baryshkov)

   - Enable MSI interrupts if 'global' IRQ is supported, since a
     previous commit unintentionally masked them (Manivannan Sadhasivam)

   - Move endpoint controller cleanups that depend on refclk from the
     host to the notifier that tells us the host has deasserted PERST#,
     when refclk should be valid (Manivannan Sadhasivam)

   - Add DT binding and driver support for IPQ9574, with Synopsys IP
     v5.80a and Qcom IP 1.27.0 (devi priya)

   - Move the OPP "operating-points-v2" table from the
     qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
     can be used by other Qcom platforms (Qiang Yu)

   - Add 'global' SPI interrupt for events like link-up, link-down to
     qcom,pcie-x1e80100 DT binding so we can start enumeration when the
     link comes up (Qiang Yu)

   - Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
     to support this (Qiang Yu)

   - Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
     'iommu-map' DT property and doesn't need BDF-to-SID translation
     (Qiang Yu)

  Rockchip PCIe controller driver:

   - Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
     .align value (Damien Le Moal)

   - When unmapping an endpoint window, compute the region index instead
     of searching for it, and verify that the address was mapped (Damien
     Le Moal)

   - When mapping an endpoint window, verify that the address hasn't
     been mapped already (Damien Le Moal)

   - Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)

   - Fix MSI IRQ data mapping to observe the alignment constraint, which
     fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
     (Damien Le Moal)

   - Rename rockchip_pcie_parse_ep_dt() to
     rockchip_pcie_ep_get_resources() for consistency with similar DT
     interfaces (Damien Le Moal)

   - Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
     it only in the endpoint start operation (Damien Le Moal)

   - Implement pci_epc_ops.stop_link() to disable link training and
     controller configuration (Damien Le Moal)

   - Attempt link training at 5 GT/s when both partners support it
     (Damien Le Moal)

   - Add a handler for PERST# signal so we can detect host-initiated
     resets and start link training after PERST# is deasserted (Damien
     Le Moal)

  Synopsys DesignWare PCIe controller driver:

   - Clear outbound address on unmap so dw_pcie_find_index() won't match
     an ATU index that was already unmapped (Damien Le Moal)

   - Use of_property_present() instead of of_property_read_bool() when
     testing for presence of non-boolean DT properties (Rob Herring)

   - Advertise 1MB size if endpoint supports Resizable BARs, which was
     inadvertently lost in v6.11 (Niklas Cassel)

  TI J721E PCIe driver:

   - Add PCIe support for J722S SoC (Siddharth Vadapalli)

   - Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
     us), before deasserting PERST# to ensure power and refclk are
     stable (Siddharth Vadapalli)

  TI Keystone PCIe controller driver:

   - Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
     Complex mode (Kishon Vijay Abraham I)

   - Try to avoid unrecoverable SError for attempts to issue config
     transactions when the link is down; this is racy but the best we
     can do (Kishon Vijay Abraham I)

  Miscellaneous:

   - Reorganize kerneldoc parameter names to match order in function
     signature (Julia Lawall)

   - Fix sysfs reset_method_store() memory leak (Todd Kjos)

   - Simplify pci_create_slot() (Ilpo Järvinen)

   - Fix incorrect printf format specifiers in pcitest (Luo Yifan)"

* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
  PCI: rockchip-ep: Handle PERST# signal in EP mode
  PCI: rockchip-ep: Improve link training
  PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
  PCI: rockchip-ep: Refactor endpoint link training enable
  PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
  PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
  PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
  PCI: rockchip-ep: Fix MSI IRQ data mapping
  PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
  PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
  PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
  PCI: rockchip-ep: Use a macro to define EP controller .align feature
  PCI: rockchip-ep: Fix address translation unit programming
  PCI/pwrctrl: Rename pwrctrl functions and structures
  PCI/pwrctrl: Rename pwrctl files to pwrctrl
  PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
  PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
  PCI/pwrctl: Create pwrctl device only if at least one power supply is present
  PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
  tools: PCI: Fix incorrect printf format specifiers
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
     callers can't stop a device multiple times, even as we migrate from
     the global pci_rescan_remove_lock to finer-grained locking (Keith
     Busch)

   - Improve pci_walk_bus() implementation by making it recursive and
     moving locking up to avoid need for a 'locked' parameter (Keith
     Busch)

   - Unexport pci_walk_bus_locked(), which is only used internally by
     the PCI core (Keith Busch)

   - Detect some Thunderbolt chips that are built-in and hence
     'trustworthy' by a heuristic since the 'ExternalFacingPort' and
     'usb4-host-interface' ACPI properties are not quite enough (Esther
     Shimanovich)

  Resource management:

   - Use PCI bus addresses (not CPU addresses) in 'ranges' properties
     when building dynamic DT nodes so systems where PCI and CPU
     addresses differ work correctly (Andrea della Porta)

   - Tidy resource sizing and assignment with helpers to reduce
     redundancy (Ilpo Järvinen)

   - Improve pdev_sort_resources() 'bogus alignment' warning to be more
     specific (Ilpo Järvinen)

  Driver binding:

   - Convert driver .remove_new() callbacks to .remove() again to finish
     the conversion from returning 'int' to being 'void' (Sergio
     Paracuellos)

   - Export pcim_request_all_regions(), a managed interface to request
     all BARs (Philipp Stanner)

   - Replace pcim_iomap_regions_request_all() with
     pcim_request_all_regions(), and pcim_iomap_table()[n] with
     pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
     octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
     (Philipp Stanner)

   - Remove the now unused pcim_iomap_regions_request_all() (Philipp
     Stanner)

   - Export pcim_iounmap_region(), a managed interface to unmap and
     release a PCI BAR (Philipp Stanner)

   - Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
     pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
     following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
     cavium (Philipp Stanner)

  Error handling:

   - Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
     bridge; previously Secondary Bus Reset could only be used when
     there was a single device below a bridge (Keith Busch)

   - Warn if we reset a running device where the driver didn't register
     pci_error_handlers notification callbacks (Keith Busch)

  ASPM:

   - Disable ASPM L1 before touching L1 PM Substates to follow the spec
     closer and avoid a CPU load timeout on some platforms (Ajay
     Agarwal)

   - Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
     as required per spec for all L1 Substates changes (Jian-Hong Pan)

  Power management:

   - Enable starfive controller runtime PM before probing host bridge
     (Mayank Rana)

   - Enable runtime power management for host bridges (Krishna chaitanya
     chundru)

  Power control:

   - Use of_platform_device_create() instead of of_platform_populate()
     to create pwrctl platform devices so we can control it based on the
     child nodes (Manivannan Sadhasivam)

   - Create pwrctrl platform devices only if there's a relevant power
     supply property (Manivannan Sadhasivam)

   - Add device link from the pwrctl supplier to the PCI dev to ensure
     pwrctl drivers are probed before the PCI dev driver; this avoids a
     race where pwrctl could change device power state while the PCI
     driver was active (Manivannan Sadhasivam)

   - Find pwrctl device for removal with of_find_device_by_node()
     instead of searching all children of the parent (Manivannan
     Sadhasivam)

   - Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
     ('bwctrl') and hotplug files (Bjorn Helgaas)

  Bandwidth control:

   - Add read/modify/write locking for Link Control 2, which is used to
     manage Link speed (Ilpo Järvinen)

   - Extract Link Bandwidth Management Status check into
     pcie_lbms_seen(), where it can be shared between the bandwidth
     controller and quirks that use it to help retrain failed links
     (Ilpo Järvinen)

   - Re-add Link Bandwidth notification support with updates to address
     the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
     Järvinen)

   - Add pcie_set_target_speed() and related functionality so drivers
     can manage PCIe Link speed based on thermal or other constraints
     (Ilpo Järvinen)

   - Add a thermal cooling driver to throttle PCIe Links via the
     existing thermal management framework (Ilpo Järvinen)

   - Add a userspace selftest for the PCIe bandwidth controller (Ilpo
     Järvinen)

  PCI device hotplug:

   - Add hotplug controller driver for Marvell OCTEON multi-function
     device where function 0 has a management console interface to
     enable/disable and provision various personalities for the other
     functions (Shijith Thotton)

   - Retain a reference to the pci_bus for the lifetime of a pci_slot to
     avoid a use-after-free when the thunderbolt driver resets USB4 host
     routers on boot, causing hotplug remove/add of downstream docks or
     other devices (Lukas Wunner)

   - Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
     (Guilherme Giacomo Simoes)

   - Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)

   - Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
     detection in cpqphp (Ilpo Järvinen)

   - Simplify cpqphp enumeration, which is already simple-minded and
     doesn't handle devices below hot-added bridges (Ilpo Järvinen)

  Virtualization:

   - Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
     capability but do isolate functions as though PCI_ACS_RR and
     PCI_ACS_CR were set, so the functions can be in independent IOMMU
     groups (Mengyuan Lou)

  TLP Processing Hints (TPH):

   - Add and document TLP Processing Hints (TPH) support so drivers can
     enable and disable TPH and the kernel can save/restore TPH
     configuration (Wei Huang)

   - Add TPH Steering Tag support so drivers can retrieve Steering Tag
     values associated with specific CPUs via an ACPI _DSM to improve
     performance by directing DMA writes closer to their consumers (Wei
     Huang)

  Data Object Exchange (DOE):

   - Wait up to 1 second for DOE Busy bit to clear before writing a
     request to the mailbox to avoid failures if the mailbox is still
     busy from a previous transfer (Gregory Price)

  Endpoint framework:

   - Skip attempts to allocate from endpoint controller memory window if
     the requested size is larger than the window (Damien Le Moal)

   - Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
     handle controller-specific size and alignment constraints, and add
     test cases to the endpoint test driver (Damien Le Moal)

   - Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
     observe DWC-specific alignment requirements (Damien Le Moal)

   - Synchronously cancel command handler work in endpoint test before
     cleaning up DMA and BARs (Damien Le Moal)

   - Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
     Cassel)

   - Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
     dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
     (Niklas Cassel)

   - Avoid NULL dereference if Modem Host Interface Endpoint lacks
     'mmio' DT property (Zhongqiu Han)

   - Release PCI domain ID of Endpoint controller parent (not controller
     itself) and before unregistering the controller, to avoid
     use-after-free (Zijun Hu)

   - Clear secondary (not primary) EPC in pci_epc_remove_epf() when
     removing the secondary controller associated with an NTB (Zijun Hu)

  Cadence PCIe controller driver:

   - Lower severity of 'phy-names' message (Bartosz Wawrzyniak)

  Freescale i.MX6 PCIe controller driver:

   - Fix suspend/resume support on i.MX6QDL, which has a hardware
     erratum that prevents use of L2 (Stefan Eichenberger)

  Intel VMD host bridge driver:

   - Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)

  MediaTek PCIe Gen3 controller driver:

   - Update mediatek-gen3 DT binding to require the exact number of
     clocks for each SoC (Fei Shao)

   - Add support for DT 'max-link-speed' and 'num-lanes' properties to
     restrict the link speed and width (AngeloGioacchino Del Regno)

  Microchip PolarFlare PCIe controller driver:

   - Add DT and driver support for using either of the two PolarFire
     Root Ports (Conor Dooley)

  NVIDIA Tegra194 PCIe controller driver:

   - Move endpoint controller cleanups that depend on refclk from the
     host to the notifier that tells us the host has deasserted PERST#,
     when refclk should be valid (Manivannan Sadhasivam)

  Qualcomm PCIe controller driver:

   - Add qcom SAR2130P DT binding with an additional clock (Dmitry
     Baryshkov)

   - Enable MSI interrupts if 'global' IRQ is supported, since a
     previous commit unintentionally masked them (Manivannan Sadhasivam)

   - Move endpoint controller cleanups that depend on refclk from the
     host to the notifier that tells us the host has deasserted PERST#,
     when refclk should be valid (Manivannan Sadhasivam)

   - Add DT binding and driver support for IPQ9574, with Synopsys IP
     v5.80a and Qcom IP 1.27.0 (devi priya)

   - Move the OPP "operating-points-v2" table from the
     qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
     can be used by other Qcom platforms (Qiang Yu)

   - Add 'global' SPI interrupt for events like link-up, link-down to
     qcom,pcie-x1e80100 DT binding so we can start enumeration when the
     link comes up (Qiang Yu)

   - Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
     to support this (Qiang Yu)

   - Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
     'iommu-map' DT property and doesn't need BDF-to-SID translation
     (Qiang Yu)

  Rockchip PCIe controller driver:

   - Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
     .align value (Damien Le Moal)

   - When unmapping an endpoint window, compute the region index instead
     of searching for it, and verify that the address was mapped (Damien
     Le Moal)

   - When mapping an endpoint window, verify that the address hasn't
     been mapped already (Damien Le Moal)

   - Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)

   - Fix MSI IRQ data mapping to observe the alignment constraint, which
     fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
     (Damien Le Moal)

   - Rename rockchip_pcie_parse_ep_dt() to
     rockchip_pcie_ep_get_resources() for consistency with similar DT
     interfaces (Damien Le Moal)

   - Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
     it only in the endpoint start operation (Damien Le Moal)

   - Implement pci_epc_ops.stop_link() to disable link training and
     controller configuration (Damien Le Moal)

   - Attempt link training at 5 GT/s when both partners support it
     (Damien Le Moal)

   - Add a handler for PERST# signal so we can detect host-initiated
     resets and start link training after PERST# is deasserted (Damien
     Le Moal)

  Synopsys DesignWare PCIe controller driver:

   - Clear outbound address on unmap so dw_pcie_find_index() won't match
     an ATU index that was already unmapped (Damien Le Moal)

   - Use of_property_present() instead of of_property_read_bool() when
     testing for presence of non-boolean DT properties (Rob Herring)

   - Advertise 1MB size if endpoint supports Resizable BARs, which was
     inadvertently lost in v6.11 (Niklas Cassel)

  TI J721E PCIe driver:

   - Add PCIe support for J722S SoC (Siddharth Vadapalli)

   - Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
     us), before deasserting PERST# to ensure power and refclk are
     stable (Siddharth Vadapalli)

  TI Keystone PCIe controller driver:

   - Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
     Complex mode (Kishon Vijay Abraham I)

   - Try to avoid unrecoverable SError for attempts to issue config
     transactions when the link is down; this is racy but the best we
     can do (Kishon Vijay Abraham I)

  Miscellaneous:

   - Reorganize kerneldoc parameter names to match order in function
     signature (Julia Lawall)

   - Fix sysfs reset_method_store() memory leak (Todd Kjos)

   - Simplify pci_create_slot() (Ilpo Järvinen)

   - Fix incorrect printf format specifiers in pcitest (Luo Yifan)"

* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
  PCI: rockchip-ep: Handle PERST# signal in EP mode
  PCI: rockchip-ep: Improve link training
  PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
  PCI: rockchip-ep: Refactor endpoint link training enable
  PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
  PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
  PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
  PCI: rockchip-ep: Fix MSI IRQ data mapping
  PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
  PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
  PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
  PCI: rockchip-ep: Use a macro to define EP controller .align feature
  PCI: rockchip-ep: Fix address translation unit programming
  PCI/pwrctrl: Rename pwrctrl functions and structures
  PCI/pwrctrl: Rename pwrctl files to pwrctrl
  PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
  PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
  PCI/pwrctl: Create pwrctl device only if at least one power supply is present
  PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
  tools: PCI: Fix incorrect printf format specifiers
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic</title>
<updated>2024-11-20T23:13:02+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2024-11-20T23:13:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=79caa6c88ac484111b24488eb9fe1c86a3d18016'/>
<id>79caa6c88ac484111b24488eb9fe1c86a3d18016</id>
<content type='text'>
Pull asm-generic updates from Arnd Bergmann:
 "These are a number of unrelated cleanups, generally simplifying the
  architecture specific header files:

   - A series from Al Viro simplifies asm/vga.h, after it turns out that
     most of it can be generalized.

   - A series from Julian Vetter adds a common version of
     memcpy_{to,from}io() and memset_io() and changes most architectures
     to use that instead of their own implementation

   - A series from Niklas Schnelle concludes his work to make PC style
     inb()/outb() optional

   - Nicolas Pitre contributes improvements for the generic do_div()
     helper

   - Christoph Hellwig adds a generic version of page_to_phys() and
     phys_to_page(), replacing the slightly different architecture
     specific definitions.

   - Uwe Kleine-Koenig has a minor cleanup for ioctl definitions"

* tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
  empty include/asm-generic/vga.h
  sparc: get rid of asm/vga.h
  asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to
  vt_buffer.h: get rid of dead code in default scr_...() instances
  tty: serial: export serial_8250_warn_need_ioport
  lib/iomem_copy: fix kerneldoc format style
  hexagon: simplify asm/io.h for !HAS_IOPORT
  loongarch: Use new fallback IO memcpy/memset
  csky: Use new fallback IO memcpy/memset
  arm64: Use new fallback IO memcpy/memset
  New implementation for IO memcpy and IO memset
  watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240
  __arch_xprod64(): make __always_inline when optimizing for performance
  ARM: div64: improve __arch_xprod_64()
  asm-generic/div64: optimize/simplify __div64_const32()
  lib/math/test_div64: add some edge cases relevant to __div64_const32()
  asm-generic: add an optional pfn_valid check to page_to_phys
  asm-generic: provide generic page_to_phys and phys_to_page implementations
  asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
  tty: serial: handle HAS_IOPORT dependencies
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull asm-generic updates from Arnd Bergmann:
 "These are a number of unrelated cleanups, generally simplifying the
  architecture specific header files:

   - A series from Al Viro simplifies asm/vga.h, after it turns out that
     most of it can be generalized.

   - A series from Julian Vetter adds a common version of
     memcpy_{to,from}io() and memset_io() and changes most architectures
     to use that instead of their own implementation

   - A series from Niklas Schnelle concludes his work to make PC style
     inb()/outb() optional

   - Nicolas Pitre contributes improvements for the generic do_div()
     helper

   - Christoph Hellwig adds a generic version of page_to_phys() and
     phys_to_page(), replacing the slightly different architecture
     specific definitions.

   - Uwe Kleine-Koenig has a minor cleanup for ioctl definitions"

* tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
  empty include/asm-generic/vga.h
  sparc: get rid of asm/vga.h
  asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to
  vt_buffer.h: get rid of dead code in default scr_...() instances
  tty: serial: export serial_8250_warn_need_ioport
  lib/iomem_copy: fix kerneldoc format style
  hexagon: simplify asm/io.h for !HAS_IOPORT
  loongarch: Use new fallback IO memcpy/memset
  csky: Use new fallback IO memcpy/memset
  arm64: Use new fallback IO memcpy/memset
  New implementation for IO memcpy and IO memset
  watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240
  __arch_xprod64(): make __always_inline when optimizing for performance
  ARM: div64: improve __arch_xprod_64()
  asm-generic/div64: optimize/simplify __div64_const32()
  lib/math/test_div64: add some edge cases relevant to __div64_const32()
  asm-generic: add an optional pfn_valid check to page_to_phys
  asm-generic: provide generic page_to_phys and phys_to_page implementations
  asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
  tty: serial: handle HAS_IOPORT dependencies
  ...
</pre>
</div>
</content>
</entry>
</feed>
