linux.git/drivers/tty, branch v5.6-rc4 Linux kernel source tree vt: selection, close sel_buffer race 2020-02-13T20:10:07+00:00 Jiri Slaby jslaby@suse.cz 2020-02-10T08:11:31+00:00 07e6124a1a46b4b5a9b3cacc0c306b50da87abf5 syzkaller reported this UAF: BUG: KASAN: use-after-free in n_tty_receive_buf_common+0x2481/0x2940 drivers/tty/n_tty.c:1741 Read of size 1 at addr ffff8880089e40e9 by task syz-executor.1/13184 CPU: 0 PID: 13184 Comm: syz-executor.1 Not tainted 5.4.7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: ... kasan_report+0xe/0x20 mm/kasan/common.c:634 n_tty_receive_buf_common+0x2481/0x2940 drivers/tty/n_tty.c:1741 tty_ldisc_receive_buf+0xac/0x190 drivers/tty/tty_buffer.c:461 paste_selection+0x297/0x400 drivers/tty/vt/selection.c:372 tioclinux+0x20d/0x4e0 drivers/tty/vt/vt.c:3044 vt_ioctl+0x1bcf/0x28d0 drivers/tty/vt/vt_ioctl.c:364 tty_ioctl+0x525/0x15a0 drivers/tty/tty_io.c:2657 vfs_ioctl fs/ioctl.c:47 [inline] It is due to a race between parallel paste_selection (TIOCL_PASTESEL) and set_selection_user (TIOCL_SETSEL) invocations. One uses sel_buffer, while the other frees it and reallocates a new one for another selection. Add a mutex to close this race. The mutex takes care properly of sel_buffer and sel_buffer_lth only. The other selection global variables (like sel_start, sel_end, and sel_cons) are protected only in set_selection_user. The other functions need quite some more work to close the races of the variables there. This is going to happen later. This likely fixes (I am unsure as there is no reproducer provided) bug 206361 too. It was marked as CVE-2020-8648. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: syzbot+59997e8d5cbdc486e6f6@syzkaller.appspotmail.com References: https://bugzilla.kernel.org/show_bug.cgi?id=206361 Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200210081131.23572-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
syzkaller reported this UAF:
BUG: KASAN: use-after-free in n_tty_receive_buf_common+0x2481/0x2940 drivers/tty/n_tty.c:1741
Read of size 1 at addr ffff8880089e40e9 by task syz-executor.1/13184

CPU: 0 PID: 13184 Comm: syz-executor.1 Not tainted 5.4.7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
...
 kasan_report+0xe/0x20 mm/kasan/common.c:634
 n_tty_receive_buf_common+0x2481/0x2940 drivers/tty/n_tty.c:1741
 tty_ldisc_receive_buf+0xac/0x190 drivers/tty/tty_buffer.c:461
 paste_selection+0x297/0x400 drivers/tty/vt/selection.c:372
 tioclinux+0x20d/0x4e0 drivers/tty/vt/vt.c:3044
 vt_ioctl+0x1bcf/0x28d0 drivers/tty/vt/vt_ioctl.c:364
 tty_ioctl+0x525/0x15a0 drivers/tty/tty_io.c:2657
 vfs_ioctl fs/ioctl.c:47 [inline]

It is due to a race between parallel paste_selection (TIOCL_PASTESEL)
and set_selection_user (TIOCL_SETSEL) invocations. One uses sel_buffer,
while the other frees it and reallocates a new one for another
selection. Add a mutex to close this race.

The mutex takes care properly of sel_buffer and sel_buffer_lth only. The
other selection global variables (like sel_start, sel_end, and sel_cons)
are protected only in set_selection_user. The other functions need quite
some more work to close the races of the variables there. This is going
to happen later.

This likely fixes (I am unsure as there is no reproducer provided) bug
206361 too. It was marked as CVE-2020-8648.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: syzbot+59997e8d5cbdc486e6f6@syzkaller.appspotmail.com
References: https://bugzilla.kernel.org/show_bug.cgi?id=206361
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200210081131.23572-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vt: selection, handle pending signals in paste_selection 2020-02-13T20:10:07+00:00 Jiri Slaby jslaby@suse.cz 2020-02-10T08:11:30+00:00 687bff0cd08f790d540cfb7b2349f0d876cdddec When pasting a selection to a vt, the task is set as INTERRUPTIBLE while waiting for a tty to unthrottle. But signals are not handled at all. Normally, this is not a problem as tty_ldisc_receive_buf receives all the goods and a user has no reason to interrupt the task. There are two scenarios where this matters: 1) when the tty is throttled and a signal is sent to the process, it spins on a CPU until the tty is unthrottled. schedule() does not really echedule, but returns immediately, of course. 2) when the sel_buffer becomes invalid, KASAN prevents any reads from it and the loop simply does not proceed and spins forever (causing the tty to throttle, but the code never sleeps, the same as above). This sometimes happens as there is a race in the sel_buffer handling code. So add signal handling to this ioctl (TIOCL_PASTESEL) and return -EINTR in case a signal is pending. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200210081131.23572-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When pasting a selection to a vt, the task is set as INTERRUPTIBLE while
waiting for a tty to unthrottle. But signals are not handled at all.
Normally, this is not a problem as tty_ldisc_receive_buf receives all
the goods and a user has no reason to interrupt the task.

There are two scenarios where this matters:
1) when the tty is throttled and a signal is sent to the process, it
   spins on a CPU until the tty is unthrottled. schedule() does not
   really echedule, but returns immediately, of course.
2) when the sel_buffer becomes invalid, KASAN prevents any reads from it
   and the loop simply does not proceed and spins forever (causing the
   tty to throttle, but the code never sleeps, the same as above). This
   sometimes happens as there is a race in the sel_buffer handling code.

So add signal handling to this ioctl (TIOCL_PASTESEL) and return -EINTR
in case a signal is pending.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200210081131.23572-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: cpm_uart: call cpm_muram_init before registering console 2020-02-13T20:03:26+00:00 Rasmus Villemoes linux@rasmusvillemoes.dk 2020-02-13T11:43:42+00:00 4508cf76b1ecdf20a456b6b161acbe78f3b23358 Christophe reports that powerpc 8xx silently fails to 5.6-rc1. It turns out I was wrong about nobody relying on the lazy initialization of the cpm/qe muram in commit b6231ea2b3c6 (soc: fsl: qe: drop broken lazy call of cpm_muram_init()). Rather than reinstating the somewhat dubious lazy call (initializing a currently held spinlock, and implicitly doing a GFP_KERNEL under that spinlock), make sure that cpm_muram_init() is called early enough - I thought the calls from the subsys_initcalls were good enough, but when used by console drivers, that's obviously not the case. cpm_muram_init() is safe to call twice (there's an early return if it is already initialized), so keep the call from cpm_init() - in case SERIAL_CPM_CONSOLE=n. Fixes: b6231ea2b3c6 (soc: fsl: qe: drop broken lazy call of cpm_muram_init()) Reported-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/20200213114342.21712-1-linux@rasmusvillemoes.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Christophe reports that powerpc 8xx silently fails to 5.6-rc1. It turns
out I was wrong about nobody relying on the lazy initialization of the
cpm/qe muram in commit b6231ea2b3c6 (soc: fsl: qe: drop broken lazy
call of cpm_muram_init()).

Rather than reinstating the somewhat dubious lazy call (initializing a
currently held spinlock, and implicitly doing a GFP_KERNEL under that
spinlock), make sure that cpm_muram_init() is called early enough - I
thought the calls from the subsys_initcalls were good enough, but when
used by console drivers, that's obviously not the
case. cpm_muram_init() is safe to call twice (there's an early return
if it is already initialized), so keep the call from cpm_init() - in
case SERIAL_CPM_CONSOLE=n.

Fixes: b6231ea2b3c6 (soc: fsl: qe: drop broken lazy call of cpm_muram_init())
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20200213114342.21712-1-linux@rasmusvillemoes.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: qcom_geni_serial: Fix RX cancel command failure 2020-02-12T19:57:38+00:00 satya priya skakit@codeaurora.org 2020-02-11T10:13:02+00:00 679aac5ead2f18d223554a52b543e1195e181811 RX cancel command fails when BT is switched on and off multiple times. To handle this, poll for the cancel bit in SE_GENI_S_IRQ_STATUS register instead of SE_GENI_S_CMD_CTRL_REG. As per the HPG update, handle the RX last bit after cancel command and flush out the RX FIFO buffer. Signed-off-by: satya priya <skakit@codeaurora.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1581415982-8793-1-git-send-email-skakit@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
RX cancel command fails when BT is switched on and off multiple times.

To handle this, poll for the cancel bit in SE_GENI_S_IRQ_STATUS register
instead of SE_GENI_S_CMD_CTRL_REG.

As per the HPG update, handle the RX last bit after cancel command
and flush out the RX FIFO buffer.

Signed-off-by: satya priya <skakit@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1581415982-8793-1-git-send-email-skakit@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250: Check UPF_IRQ_SHARED in advance 2020-02-12T19:56:44+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2020-02-11T13:55:59+00:00 7febbcbc48fc92e3f33863b32ed715ba4aff18c4 The commit 54e53b2e8081 ("tty: serial: 8250: pass IRQ shared flag to UART ports") nicely explained the problem: ---8<---8<--- On some systems IRQ lines between multiple UARTs might be shared. If so, the irqflags have to be configured accordingly. The reason is: The 8250 port startup code performs IRQ tests *before* the IRQ handler for that particular port is registered. This is performed in serial8250_do_startup(). This function checks whether IRQF_SHARED is configured and only then disables the IRQ line while testing. This test is performed upon each open() of the UART device. Imagine two UARTs share the same IRQ line: On is already opened and the IRQ is active. When the second UART is opened, the IRQ line has to be disabled while performing IRQ tests. Otherwise an IRQ might handler might be invoked, but the IRQ itself cannot be handled, because the corresponding handler isn't registered, yet. That's because the 8250 code uses a chain-handler and invokes the corresponding port's IRQ handling routines himself. Unfortunately this IRQF_SHARED flag isn't configured for UARTs probed via device tree even if the IRQs are shared. This way, the actual and shared IRQ line isn't disabled while performing tests and the kernel correctly detects a spurious IRQ. So, adding this flag to the DT probe solves the issue. Note: The UPF_SHARE_IRQ flag is configured unconditionally. Therefore, the IRQF_SHARED flag can be set unconditionally as well. Example stack trace by performing `echo 1 > /dev/ttyS2` on a non-patched system: |irq 85: nobody cared (try booting with the "irqpoll" option) | [...] |handlers: |[<ffff0000080fc628>] irq_default_primary_handler threaded [<ffff00000855fbb8>] serial8250_interrupt |Disabling IRQ #85 ---8<---8<--- But unfortunately didn't fix the root cause. Let's try again here by moving IRQ flag assignment from serial_link_irq_chain() to serial8250_do_startup(). This should fix the similar issue reported for 8250_pnp case. Since this change we don't need to have custom solutions in 8250_aspeed_vuart and 8250_of drivers, thus, drop them. Fixes: 1c2f04937b3e ("serial: 8250: add IRQ trigger support") Reported-by: Li RongQing <lirongqing@baidu.com> Cc: Kurt Kanzenbach <kurt@linutronix.de> Cc: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable <stable@vger.kernel.org> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20200211135559.85960-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The commit 54e53b2e8081
  ("tty: serial: 8250: pass IRQ shared flag to UART ports")
nicely explained the problem:

---8<---8<---

On some systems IRQ lines between multiple UARTs might be shared. If so, the
irqflags have to be configured accordingly. The reason is: The 8250 port startup
code performs IRQ tests *before* the IRQ handler for that particular port is
registered. This is performed in serial8250_do_startup(). This function checks
whether IRQF_SHARED is configured and only then disables the IRQ line while
testing.

This test is performed upon each open() of the UART device. Imagine two UARTs
share the same IRQ line: On is already opened and the IRQ is active. When the
second UART is opened, the IRQ line has to be disabled while performing IRQ
tests. Otherwise an IRQ might handler might be invoked, but the IRQ itself
cannot be handled, because the corresponding handler isn't registered,
yet. That's because the 8250 code uses a chain-handler and invokes the
corresponding port's IRQ handling routines himself.

Unfortunately this IRQF_SHARED flag isn't configured for UARTs probed via device
tree even if the IRQs are shared. This way, the actual and shared IRQ line isn't
disabled while performing tests and the kernel correctly detects a spurious
IRQ. So, adding this flag to the DT probe solves the issue.

Note: The UPF_SHARE_IRQ flag is configured unconditionally. Therefore, the
IRQF_SHARED flag can be set unconditionally as well.

Example stack trace by performing `echo 1 > /dev/ttyS2` on a non-patched system:

|irq 85: nobody cared (try booting with the "irqpoll" option)
| [...]
|handlers:
|[<ffff0000080fc628>] irq_default_primary_handler threaded [<ffff00000855fbb8>] serial8250_interrupt
|Disabling IRQ #85

---8<---8<---

But unfortunately didn't fix the root cause. Let's try again here by moving
IRQ flag assignment from serial_link_irq_chain() to serial8250_do_startup().

This should fix the similar issue reported for 8250_pnp case.

Since this change we don't need to have custom solutions in 8250_aspeed_vuart
and 8250_of drivers, thus, drop them.

Fixes: 1c2f04937b3e ("serial: 8250: add IRQ trigger support")
Reported-by: Li RongQing <lirongqing@baidu.com>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Cc: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20200211135559.85960-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: imx: setup the correct sg entry for tx dma 2020-02-12T19:55:21+00:00 Fugang Duan fugang.duan@nxp.com 2020-02-11T06:16:01+00:00 f76707831829530ffdd3888bebc108aecefccaa0 There has oops as below happen on i.MX8MP EVK platform that has 6G bytes DDR memory. when (xmit->tail < xmit->head) && (xmit->head == 0), it setups one sg entry with sg->length is zero: sg_set_buf(sgl + 1, xmit->buf, xmit->head); if xmit->buf is allocated from >4G address space, and SDMA only support <4G address space, then dma_map_sg() will call swiotlb_map() to do bounce buffer copying and mapping. But swiotlb_map() don't allow sg entry's length is zero, otherwise report BUG_ON(). So the patch is to correct the tx DMA scatter list. Oops: [ 287.675715] kernel BUG at kernel/dma/swiotlb.c:497! [ 287.680592] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 287.686075] Modules linked in: [ 287.689133] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.3-00016-g3fdc4e0-dirty #10 [ 287.696872] Hardware name: FSL i.MX8MP EVK (DT) [ 287.701402] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 287.706199] pc : swiotlb_tbl_map_single+0x1fc/0x310 [ 287.711076] lr : swiotlb_map+0x60/0x148 [ 287.714909] sp : ffff800010003c00 [ 287.718221] x29: ffff800010003c00 x28: 0000000000000000 [ 287.723533] x27: 0000000000000040 x26: ffff800011ae0000 [ 287.728844] x25: ffff800011ae09f8 x24: 0000000000000000 [ 287.734155] x23: 00000001b7af9000 x22: 0000000000000000 [ 287.739465] x21: ffff000176409c10 x20: 00000000001f7ffe [ 287.744776] x19: ffff000176409c10 x18: 000000000000002e [ 287.750087] x17: 0000000000000000 x16: 0000000000000000 [ 287.755397] x15: 0000000000000000 x14: 0000000000000000 [ 287.760707] x13: ffff00017f334000 x12: 0000000000000001 [ 287.766018] x11: 00000000001fffff x10: 0000000000000000 [ 287.771328] x9 : 0000000000000003 x8 : 0000000000000000 [ 287.776638] x7 : 0000000000000000 x6 : 0000000000000000 [ 287.781949] x5 : 0000000000200000 x4 : 0000000000000000 [ 287.787259] x3 : 0000000000000001 x2 : 00000001b7af9000 [ 287.792570] x1 : 00000000fbfff000 x0 : 0000000000000000 [ 287.797881] Call trace: [ 287.800328] swiotlb_tbl_map_single+0x1fc/0x310 [ 287.804859] swiotlb_map+0x60/0x148 [ 287.808347] dma_direct_map_page+0xf0/0x130 [ 287.812530] dma_direct_map_sg+0x78/0xe0 [ 287.816453] imx_uart_dma_tx+0x134/0x2f8 [ 287.820374] imx_uart_dma_tx_callback+0xd8/0x168 [ 287.824992] vchan_complete+0x194/0x200 [ 287.828828] tasklet_action_common.isra.0+0x154/0x1a0 [ 287.833879] tasklet_action+0x24/0x30 [ 287.837540] __do_softirq+0x120/0x23c [ 287.841202] irq_exit+0xb8/0xd8 [ 287.844343] __handle_domain_irq+0x64/0xb8 [ 287.848438] gic_handle_irq+0x5c/0x148 [ 287.852185] el1_irq+0xb8/0x180 [ 287.855327] cpuidle_enter_state+0x84/0x360 [ 287.859508] cpuidle_enter+0x34/0x48 [ 287.863083] call_cpuidle+0x18/0x38 [ 287.866571] do_idle+0x1e0/0x280 [ 287.869798] cpu_startup_entry+0x20/0x40 [ 287.873721] rest_init+0xd4/0xe0 [ 287.876949] arch_call_rest_init+0xc/0x14 [ 287.880958] start_kernel+0x420/0x44c [ 287.884622] Code: 9124c021 9417aff8 a94363f7 17ffffd5 (d4210000) [ 287.890718] ---[ end trace 5bc44c4ab6b009ce ]--- [ 287.895334] Kernel panic - not syncing: Fatal exception in interrupt [ 287.901686] SMP: stopping secondary CPUs [ 288.905607] SMP: failed to stop secondary CPUs 0-1 [ 288.910395] Kernel Offset: disabled [ 288.913882] CPU features: 0x0002,2000200c [ 288.917888] Memory Limit: none [ 288.920944] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Reported-by: Eagle Zhou <eagle.zhou@nxp.com> Tested-by: Eagle Zhou <eagle.zhou@nxp.com> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Cc: stable <stable@vger.kernel.org> Fixes: 7942f8577f2a ("serial: imx: TX DMA: clean up sg initialization") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/1581401761-6378-1-git-send-email-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
There has oops as below happen on i.MX8MP EVK platform that has
6G bytes DDR memory.

when (xmit->tail < xmit->head) && (xmit->head == 0),
it setups one sg entry with sg->length is zero:
	sg_set_buf(sgl + 1, xmit->buf, xmit->head);

if xmit->buf is allocated from >4G address space, and SDMA only
support <4G address space, then dma_map_sg() will call swiotlb_map()
to do bounce buffer copying and mapping.

But swiotlb_map() don't allow sg entry's length is zero, otherwise
report BUG_ON().

So the patch is to correct the tx DMA scatter list.

Oops:
[  287.675715] kernel BUG at kernel/dma/swiotlb.c:497!
[  287.680592] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[  287.686075] Modules linked in:
[  287.689133] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.3-00016-g3fdc4e0-dirty #10
[  287.696872] Hardware name: FSL i.MX8MP EVK (DT)
[  287.701402] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[  287.706199] pc : swiotlb_tbl_map_single+0x1fc/0x310
[  287.711076] lr : swiotlb_map+0x60/0x148
[  287.714909] sp : ffff800010003c00
[  287.718221] x29: ffff800010003c00 x28: 0000000000000000
[  287.723533] x27: 0000000000000040 x26: ffff800011ae0000
[  287.728844] x25: ffff800011ae09f8 x24: 0000000000000000
[  287.734155] x23: 00000001b7af9000 x22: 0000000000000000
[  287.739465] x21: ffff000176409c10 x20: 00000000001f7ffe
[  287.744776] x19: ffff000176409c10 x18: 000000000000002e
[  287.750087] x17: 0000000000000000 x16: 0000000000000000
[  287.755397] x15: 0000000000000000 x14: 0000000000000000
[  287.760707] x13: ffff00017f334000 x12: 0000000000000001
[  287.766018] x11: 00000000001fffff x10: 0000000000000000
[  287.771328] x9 : 0000000000000003 x8 : 0000000000000000
[  287.776638] x7 : 0000000000000000 x6 : 0000000000000000
[  287.781949] x5 : 0000000000200000 x4 : 0000000000000000
[  287.787259] x3 : 0000000000000001 x2 : 00000001b7af9000
[  287.792570] x1 : 00000000fbfff000 x0 : 0000000000000000
[  287.797881] Call trace:
[  287.800328]  swiotlb_tbl_map_single+0x1fc/0x310
[  287.804859]  swiotlb_map+0x60/0x148
[  287.808347]  dma_direct_map_page+0xf0/0x130
[  287.812530]  dma_direct_map_sg+0x78/0xe0
[  287.816453]  imx_uart_dma_tx+0x134/0x2f8
[  287.820374]  imx_uart_dma_tx_callback+0xd8/0x168
[  287.824992]  vchan_complete+0x194/0x200
[  287.828828]  tasklet_action_common.isra.0+0x154/0x1a0
[  287.833879]  tasklet_action+0x24/0x30
[  287.837540]  __do_softirq+0x120/0x23c
[  287.841202]  irq_exit+0xb8/0xd8
[  287.844343]  __handle_domain_irq+0x64/0xb8
[  287.848438]  gic_handle_irq+0x5c/0x148
[  287.852185]  el1_irq+0xb8/0x180
[  287.855327]  cpuidle_enter_state+0x84/0x360
[  287.859508]  cpuidle_enter+0x34/0x48
[  287.863083]  call_cpuidle+0x18/0x38
[  287.866571]  do_idle+0x1e0/0x280
[  287.869798]  cpu_startup_entry+0x20/0x40
[  287.873721]  rest_init+0xd4/0xe0
[  287.876949]  arch_call_rest_init+0xc/0x14
[  287.880958]  start_kernel+0x420/0x44c
[  287.884622] Code: 9124c021 9417aff8 a94363f7 17ffffd5 (d4210000)
[  287.890718] ---[ end trace 5bc44c4ab6b009ce ]---
[  287.895334] Kernel panic - not syncing: Fatal exception in interrupt
[  287.901686] SMP: stopping secondary CPUs
[  288.905607] SMP: failed to stop secondary CPUs 0-1
[  288.910395] Kernel Offset: disabled
[  288.913882] CPU features: 0x0002,2000200c
[  288.917888] Memory Limit: none
[  288.920944] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Reported-by: Eagle Zhou <eagle.zhou@nxp.com>
Tested-by: Eagle Zhou <eagle.zhou@nxp.com>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Cc: stable <stable@vger.kernel.org>
Fixes: 7942f8577f2a ("serial: imx: TX DMA: clean up sg initialization")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/1581401761-6378-1-git-send-email-fugang.duan@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vt: vt_ioctl: fix race in VT_RESIZEX 2020-02-12T19:53:23+00:00 Eric Dumazet edumazet@google.com 2020-02-10T19:07:21+00:00 6cd1ed50efd88261298577cd92a14f2768eddeeb We need to make sure vc_cons[i].d is not NULL after grabbing console_lock(), or risk a crash. general protection fault, probably for non-canonical address 0xdffffc0000000068: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000340-0x0000000000000347] CPU: 1 PID: 19462 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883 Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40 RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000 RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340 RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f FS: 00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tty_ioctl+0xa37/0x14f0 drivers/tty/tty_io.c:2660 vfs_ioctl fs/ioctl.c:47 [inline] ksys_ioctl+0x123/0x180 fs/ioctl.c:763 __do_sys_ioctl fs/ioctl.c:772 [inline] __se_sys_ioctl fs/ioctl.c:770 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45b399 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f7d13c11c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f7d13c126d4 RCX: 000000000045b399 RDX: 0000000020000080 RSI: 000000000000560a RDI: 0000000000000003 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000666 R14: 00000000004c7f04 R15: 000000000075bf2c Modules linked in: ---[ end trace 80970faf7a67eb77 ]--- RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883 Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40 RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000 RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340 RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f FS: 00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: stable <stable@vger.kernel.org> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20200210190721.200418-1-edumazet@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We need to make sure vc_cons[i].d is not NULL after grabbing
console_lock(), or risk a crash.

general protection fault, probably for non-canonical address 0xdffffc0000000068: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000340-0x0000000000000347]
CPU: 1 PID: 19462 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883
Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40
RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000
RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340
RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d
R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d
R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f
FS:  00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 tty_ioctl+0xa37/0x14f0 drivers/tty/tty_io.c:2660
 vfs_ioctl fs/ioctl.c:47 [inline]
 ksys_ioctl+0x123/0x180 fs/ioctl.c:763
 __do_sys_ioctl fs/ioctl.c:772 [inline]
 __se_sys_ioctl fs/ioctl.c:770 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x45b399
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f7d13c11c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f7d13c126d4 RCX: 000000000045b399
RDX: 0000000020000080 RSI: 000000000000560a RDI: 0000000000000003
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000666 R14: 00000000004c7f04 R15: 000000000075bf2c
Modules linked in:
---[ end trace 80970faf7a67eb77 ]---
RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883
Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40
RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000
RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340
RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d
R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d
R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f
FS:  00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20200210190721.200418-1-edumazet@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vt: fix scrollback flushing on background consoles 2020-02-10T21:51:44+00:00 Nicolas Pitre nico@fluxnic.net 2020-01-28T17:50:33+00:00 3f4ef485be9d54040b695f32ec76d0f1ea50bbf3 Commit a6dbe4427559 ("vt: perform safe console erase in the right order") provided fixes to an earlier commit by gathering all console scrollback flushing operations in a function of its own. This includes the invocation of vc_sw->con_switch() as previously done through a update_screen() call. That commit failed to carry over the con_is_visible() conditional though, as well as cursor handling, which caused problems when "\e[3J" was written to a background console. One could argue for preserving the call to update_screen(). However this does far more than we need, and it is best to remove scrollback assumptions from it. Instead let's gather the minimum needed to actually perform scrollback flushing properly in that one place. While at it, let's document the vc_sw->con_switch() side effect being relied upon. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Reported-and-tested-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2001281205560.1655@knanqh.ubzr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Commit a6dbe4427559 ("vt: perform safe console erase in the right
order") provided fixes to an earlier commit by gathering all console
scrollback flushing operations in a function of its own. This includes
the invocation of vc_sw->con_switch() as previously done through a
update_screen() call. That commit failed to carry over the
con_is_visible() conditional though, as well as cursor handling, which
caused problems when "\e[3J" was written to a background console.

One could argue for preserving the call to update_screen(). However
this does far more than we need, and it is best to remove scrollback
assumptions from it. Instead let's gather the minimum needed to actually
perform scrollback flushing properly in that one place.

While at it, let's document the vc_sw->con_switch() side effect being
relied upon.

Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Reported-and-tested-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2001281205560.1655@knanqh.ubzr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started 2020-02-10T20:32:13+00:00 Dmitry Osipenko digetx@gmail.com 2020-02-09T16:44:15+00:00 1f69a1273b3f204a9c00dc3bbdcc4afcd0787428 It is possible to get an instant RX timeout or end-of-transfer interrupt before RX DMA was started, if transaction is less than 16 bytes. Transfer should be handled in PIO mode in this case because DMA can't handle it. This patch brings back the original behaviour of the driver that was changed by accident by a previous commit, it fixes occasional Bluetooth HW initialization failures which I started to notice recently. Fixes: d5e3fadb7012 ("tty: serial: tegra: Activate RX DMA transfer by request") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200209164415.9632-1-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
It is possible to get an instant RX timeout or end-of-transfer interrupt
before RX DMA was started, if transaction is less than 16 bytes. Transfer
should be handled in PIO mode in this case because DMA can't handle it.
This patch brings back the original behaviour of the driver that was
changed by accident by a previous commit, it fixes occasional Bluetooth HW
initialization failures which I started to notice recently.

Fixes: d5e3fadb7012 ("tty: serial: tegra: Activate RX DMA transfer by request")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200209164415.9632-1-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode 2020-02-10T20:26:44+00:00 Nicolas Ferre nicolas.ferre@microchip.com 2020-02-10T15:20:53+00:00 04b5bfe3dc94e64d0590c54045815cb5183fb095 In atmel_shutdown() we call atmel_stop_rx() and atmel_stop_tx() functions. Prevent the rx restart that is implemented in RS485 or ISO7816 modes when calling atmel_stop_tx() by using the atomic information tasklet_shutdown that is already in place for this purpose. Fixes: 98f2082c3ac4 ("tty/serial: atmel: enforce tasklet init and termination sequences") Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200210152053.8289-1-nicolas.ferre@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
In atmel_shutdown() we call atmel_stop_rx() and atmel_stop_tx() functions.
Prevent the rx restart that is implemented in RS485 or ISO7816 modes when
calling atmel_stop_tx() by using the atomic information tasklet_shutdown
that is already in place for this purpose.

Fixes: 98f2082c3ac4 ("tty/serial: atmel: enforce tasklet init and termination sequences")
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200210152053.8289-1-nicolas.ferre@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>