Pull kconfig updates from Michal Marek:
 "Yann E Morin was supposed to take over kconfig maintainership, but
  this hasn't happened.  So I'm sending a few kconfig patches that I
  collected:

   - Fix for missing va_end in kconfig
   - merge_config.sh displays used if given too few arguments
   - s/boolean/bool/ in Kconfig files for consistency, with the plan to
     only support bool in the future"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: use va_end to match corresponding va_start
  merge_config.sh: Display usage if given too few arguments
  kconfig: use bool instead of boolean for type definition attributes

Pull tty/serial driver patches from Greg KH:
 "Here's the big tty/serial driver update for 3.20-rc1.  Nothing huge
  here, just lots of driver updates and some core tty layer fixes as
  well.  All have been in linux-next with no reported issues"

* tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
  serial: 8250: Fix UART_BUG_TXEN workaround
  serial: driver for ETRAX FS UART
  tty: remove unused variable sprop
  serial: of-serial: fetch line number from DT
  serial: samsung: earlycon support depends on CONFIG_SERIAL_SAMSUNG_CONSOLE
  tty/serial: serial8250_set_divisor() can be static
  tty/serial: Add Spreadtrum sc9836-uart driver support
  Documentation: DT: Add bindings for Spreadtrum SoC Platform
  serial: samsung: remove redundant interrupt enabling
  tty: Remove external interface for tty_set_termios()
  serial: omap: Fix RTS handling
  serial: 8250_omap: Use UPSTAT_AUTORTS for RTS handling
  serial: core: Rework hw-assisted flow control support
  tty/serial: 8250_early: Add support for PXA UARTs
  tty/serial: of_serial: add support for PXA/MMP uarts
  tty/serial: of_serial: add DT alias ID handling
  serial: 8250: Prevent concurrent updates to shadow registers
  serial: 8250: Use canary to restart console after suspend
  serial: 8250: Refactor XR17V35X divisor calculation
  serial: 8250: Refactor divisor programming
  ...

Merge second set of updates from Andrew Morton:
 "More of MM"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (83 commits)
  mm/nommu.c: fix arithmetic overflow in __vm_enough_memory()
  mm/mmap.c: fix arithmetic overflow in __vm_enough_memory()
  vmstat: Reduce time interval to stat update on idle cpu
  mm/page_owner.c: remove unnecessary stack_trace field
  Documentation/filesystems/proc.txt: describe /proc/<pid>/map_files
  mm: incorporate read-only pages into transparent huge pages
  vmstat: do not use deferrable delayed work for vmstat_update
  mm: more aggressive page stealing for UNMOVABLE allocations
  mm: always steal split buddies in fallback allocations
  mm: when stealing freepages, also take pages created by splitting buddy page
  mincore: apply page table walker on do_mincore()
  mm: /proc/pid/clear_refs: avoid split_huge_page()
  mm: pagewalk: fix misbehavior of walk_page_range for vma(VM_PFNMAP)
  mempolicy: apply page table walker on queue_pages_range()
  arch/powerpc/mm/subpage-prot.c: use walk->vma and walk_page_vma()
  memcg: cleanup preparation for page table walk
  numa_maps: remove numa_maps->vma
  numa_maps: fix typo in gather_hugetbl_stats
  pagemap: use walk->vma instead of calling find_vma()
  clear_refs: remove clear_refs_private->vma and introduce clear_refs_test_walk()
  ...

Pull s390 updates from Martin Schwidefsky:

 - The remaining patches for the z13 machine support: kernel build
   option for z13, the cache synonym avoidance, SMT support,
   compare-and-delay for spinloops and the CES5S crypto adapater.

 - The ftrace support for function tracing with the gcc hotpatch option.
   This touches common code Makefiles, Steven is ok with the changes.

 - The hypfs file system gets an extension to access diagnose 0x0c data
   in user space for performance analysis for Linux running under z/VM.

 - The iucv hvc console gets wildcard spport for the user id filtering.

 - The cacheinfo code is converted to use the generic infrastructure.

 - Cleanup and bug fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (42 commits)
  s390/process: free vx save area when releasing tasks
  s390/hypfs: Eliminate hypfs interval
  s390/hypfs: Add diagnose 0c support
  s390/cacheinfo: don't use smp_processor_id() in preemptible context
  s390/zcrypt: fixed domain scanning problem (again)
  s390/smp: increase maximum value of NR_CPUS to 512
  s390/jump label: use different nop instruction
  s390/jump label: add sanity checks
  s390/mm: correct missing space when reporting user process faults
  s390/dasd: cleanup profiling
  s390/dasd: add locking for global_profile access
  s390/ftrace: hotpatch support for function tracing
  ftrace: let notrace function attribute disable hotpatching if necessary
  ftrace: allow architectures to specify ftrace compile options
  s390: reintroduce diag 44 calls for cpu_relax()
  s390/zcrypt: Add support for new crypto express (CEX5S) adapter.
  s390/zcrypt: Number of supported ap domains is not retrievable.
  s390/spinlock: add compare-and-delay to lock wait loops
  s390/tape: remove redundant if statement
  s390/hvc_iucv: add simple wildcard matches to the iucv allow filter
  ...

Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM
suspend") has left a race window when OOM killer manages to
note_oom_kill after freeze_processes checks the counter.  The race
window is quite small and really unlikely and partial solution deemed
sufficient at the time of submission.

Tejun wasn't happy about this partial solution though and insisted on a
full solution.  That requires the full OOM and freezer's task freezing
exclusion, though.  This is done by this patch which introduces oom_sem
RW lock and turns oom_killer_disable() into a full OOM barrier.

oom_killer_disabled check is moved from the allocation path to the OOM
level and we take oom_sem for reading for both the check and the whole
OOM invocation.

oom_killer_disable() takes oom_sem for writing so it waits for all
currently running OOM killer invocations.  Then it disable all the further
OOMs by setting oom_killer_disabled and checks for any oom victims.
Victims are counted via mark_tsk_oom_victim resp.  unmark_oom_victim.  The
last victim wakes up all waiters enqueued by oom_killer_disable().
Therefore this function acts as the full OOM barrier.

The page fault path is covered now as well although it was assumed to be
safe before.  As per Tejun, "We used to have freezing points deep in file
system code which may be reacheable from page fault." so it would be
better and more robust to not rely on freezing points here.  Same applies
to the memcg OOM killer.

out_of_memory tells the caller whether the OOM was allowed to trigger and
the callers are supposed to handle the situation.  The page allocation
path simply fails the allocation same as before.  The page fault path will
retry the fault (more on that later) and Sysrq OOM trigger will simply
complain to the log.

Normally there wouldn't be any unfrozen user tasks after
try_to_freeze_tasks so the function will not block. But if there was an
OOM killer racing with try_to_freeze_tasks and the OOM victim didn't
finish yet then we have to wait for it. This should complete in a finite
time, though, because

	- the victim cannot loop in the page fault handler (it would die
	  on the way out from the exception)
	- it cannot loop in the page allocator because all the further
	  allocation would fail and __GFP_NOFAIL allocations are not
	  acceptable at this stage
	- it shouldn't be blocked on any locks held by frozen tasks
	  (try_to_freeze expects lockless context) and kernel threads and
	  work queues are not frozen yet

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Suggested-by: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While touching this area let's convert printk to pr_*.  This also makes
the printing of continuation lines done properly.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

UARTs which do not trigger THRE interrupt if the fifo is already
empty when the interrupt is enabled need tx primed manually. These
UARTs are identified by the UART_BUG_TXEN flag to enable the
required workaround.

However, the current workaround is broken; if the fifo is already
empty but the shifter is still transmitting, then serial8250_tx_chars()
will not be called but no further THRE interrupt will occur, and
tx will stall. The appropriate check is for fifo empty (THRE), not
transmitter empty (TEMT).

Signed-off-by: Dick Hollenbeck <dick@softplc.com>
[pjh: rewrote commit log]
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the last missing piece to get a kernel booting to a prompt in qemu-cris.

Signed-off-by: Niklas Cassel <nks@flawful.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sprop is unused in find_console_handle() since commit a752ee56ad84
("tty: Update hypervisor tty drivers to use core stdout parsing code.")

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The general agreed way to specify a fixed line number
for a serial console is to provide a "serial" alias
in the devicetree. Start parsing this property in
of_serial.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>